[PATCH v9 4/6] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support

[Ronald Claveau via B4 Relay <devnull+linux-kernel-dev.aliel.fr@kernel.org>]

From: Ronald Claveau <linux-kernel-dev@aliel.fr>

Replace the hardcoded MAX_LEVEL constant and fan register
with values read from platform_data (fan_reg, levels[] and nlevels),
as new MCUs need different values.

The cooling device's state is stored as an index into levels[],
and khadas_mcu_fan_set_level() writes levels[state] to fan_reg,
rather than writing the raw state value as before.

Optionally acquire and enable a "fan" regulator supply
at probe time and on resume,
so boards that gate fan power through a regulator are handled.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
---
 drivers/thermal/khadas_mcu_fan.c | 58 ++++++++++++++++++++++++++++------------
 1 file changed, 41 insertions(+), 17 deletions(-)

diff --git a/drivers/thermal/khadas_mcu_fan.c b/drivers/thermal/khadas_mcu_fan.c
index 21b3d0a71bd0d..c7f74394b823f 100644
--- a/drivers/thermal/khadas_mcu_fan.c
+++ b/drivers/thermal/khadas_mcu_fan.c
@@ -13,34 +13,30 @@
 #include <linux/regmap.h>
 #include <linux/sysfs.h>
 #include <linux/thermal.h>
-
-#define MAX_LEVEL 3
+#include <linux/regulator/consumer.h>
 
 struct khadas_mcu_fan_ctx {
 	struct khadas_mcu *mcu;
+	unsigned int fan_reg;
 	unsigned int level;
+	const unsigned int *levels;
+	unsigned int nlevels;
 	struct thermal_cooling_device *cdev;
+	struct regulator *power;
 };
 
 static int khadas_mcu_fan_set_level(struct khadas_mcu_fan_ctx *ctx,
 				    unsigned int level)
 {
-	int ret;
-
-	ret = regmap_write(ctx->mcu->regmap, KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG,
-			   level);
-	if (ret)
-		return ret;
-
-	ctx->level = level;
-
-	return 0;
+	return regmap_write(ctx->mcu->regmap, ctx->fan_reg, level);
 }
 
 static int khadas_mcu_fan_get_max_state(struct thermal_cooling_device *cdev,
 					unsigned long *state)
 {
-	*state = MAX_LEVEL;
+	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
+
+	*state = ctx->nlevels - 1;
 
 	return 0;
 }
@@ -60,14 +56,21 @@ khadas_mcu_fan_set_cur_state(struct thermal_cooling_device *cdev,
 			     unsigned long state)
 {
 	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
+	int ret;
 
-	if (state > MAX_LEVEL)
+	if (state >= ctx->nlevels)
 		return -EINVAL;
 
 	if (state == ctx->level)
 		return 0;
 
-	return khadas_mcu_fan_set_level(ctx, state);
+	ret = khadas_mcu_fan_set_level(ctx, ctx->levels[state]);
+	if (ret)
+		return ret;
+
+	ctx->level = state;
+
+	return 0;
 }
 
 static const struct thermal_cooling_device_ops khadas_mcu_fan_cooling_ops = {
@@ -78,6 +81,7 @@ static const struct thermal_cooling_device_ops khadas_mcu_fan_cooling_ops = {
 
 static int khadas_mcu_fan_probe(struct platform_device *pdev)
 {
+	const struct khadas_mcu_fan_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct khadas_mcu *mcu = dev_get_drvdata(pdev->dev.parent);
 	struct thermal_cooling_device *cdev;
 	struct device *dev = &pdev->dev;
@@ -87,7 +91,22 @@ static int khadas_mcu_fan_probe(struct platform_device *pdev)
 	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
 		return -ENOMEM;
+
 	ctx->mcu = mcu;
+	ctx->fan_reg = pdata->fan_reg;
+	ctx->levels = pdata->levels;
+	ctx->nlevels = pdata->nlevels;
+
+	ctx->power = devm_regulator_get(dev->parent, "fan");
+	if (IS_ERR(ctx->power))
+		return PTR_ERR(ctx->power);
+
+	ret = regulator_enable(ctx->power);
+	if (ret) {
+		dev_err(dev, "Failed to enable fan power supply: %d\n", ret);
+		return ret;
+	}
+
 	platform_set_drvdata(pdev, ctx);
 
 	cdev = devm_thermal_of_child_cooling_device_register(dev->parent,
@@ -125,14 +144,19 @@ static int khadas_mcu_fan_suspend(struct device *dev)
 
 	ctx->level = level_save;
 
-	return 0;
+	return regulator_disable(ctx->power);
 }
 
 static int khadas_mcu_fan_resume(struct device *dev)
 {
 	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regulator_enable(ctx->power);
+	if (ret)
+		return ret;
 
-	return khadas_mcu_fan_set_level(ctx, ctx->level);
+	return khadas_mcu_fan_set_level(ctx, ctx->levels[ctx->level]);
 }
 #endif
 

-- 
2.49.0



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic