Re: [PATCH v3 0/4] soc: amlogic: clk-measure: add A1 and T7 support

[Jian Hu <jian.hu@amlogic.com>]

Hi Neil,


On 4/21/2026 4:17 PM, Jian Hu via B4 Relay wrote:
> [ EXTERNAL EMAIL ]
>
> This series adds Amlogic clock measurement support for A1 and T7 SoCs,
> including binding updates, driver additions, and device tree enablement.


Gentle ping. The patches have received review, could you please take
another look when you have time?

>
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> ---
> Changes in v3:
> - Place the clock-measure node after pwm_ao_gh node for t7.
> - Link to v2: https://lore.kernel.org/r/20260415-clkmsr_a1_t7-v2-0-02b6314427e6@amlogic.com
>
> Changes in v2:
> - Add const for a1 and t7 clock measure table.
> - Use b4 to send this series.
> - Link to v1: https://lore.kernel.org/all/20260410100329.3167482-1-jian.hu@amlogic.com
>
> ---
> Jian Hu (4):
>        dt-bindings: soc: amlogic: clk-measure: Add A1 and T7 compatible
>        soc: amlogic: clk-measure: Add A1 and T7 support
>        arm64: dts: meson: a1: Add clk measure support
>        arm64: dts: amlogic: t7: Add clk measure support
>
>   .../soc/amlogic/amlogic,meson-gx-clk-measure.yaml  |   2 +
>   arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi        |   5 +
>   arch/arm64/boot/dts/amlogic/meson-a1.dtsi          |   5 +
>   drivers/soc/amlogic/meson-clk-measure.c            | 272 +++++++++++++++++++++
>   4 files changed, 284 insertions(+)
> ---
> base-commit: 401e5c73eedde8225e87bd11c794b8409248ff41
> change-id: 20260415-clkmsr_a1_t7-9820984d0af1
>
> Best regards,
> --
> Jian Hu <jian.hu@amlogic.com>
>
>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic