From: Neil Armstrong <neil.armstrong@linaro.org>
To: soc@kernel.org, arm@kernel.org
Cc: linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] amlogic ARM64 DT updates for v7.2 take 1
Date: Tue, 2 Jun 2026 09:52:55 +0200 [thread overview]
Message-ID: <9d4694cb-f596-4538-a437-6f2fbb6304f4@linaro.org> (raw)
Hi,
Here's the v2 of Amlogic ARM64 DT changes for v7.2, contains improvements for the Khadas VIM4
and VIM1s SBCs, plus some additions for the Phicomm N1 and a couple of low priority fixes.
A bad "Fixes" commit sha was introduced for a commit in the same PR, I squashed it with the
appropriate commit and dropped the previous tag.
This PR is largely the same as `amlogic-arm64-dt-for-v7.1`, but I sent the fixes
separately as `amlogic-fixes-v7.1-rc` as discussed with Arnd, so this tag
`amlogic-arm64-dt-for-v7.2-v1` is based on top of `amlogic-fixes-v7.1-rc`.
Thanks,
Neil
The following changes since commit 174a0ef3b33434f475c87e66f37980e39b73805a:
arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number (2026-04-21 15:46:29 +0200)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git tags/amlogic-arm64-dt-for-v7.2-v2
for you to fetch changes up to eec0722a5cac08ba995847c8eb63118cc708560b:
arm64: dts: amlogic: t7: Add i2c pinctrl node (2026-06-02 09:49:46 +0200)
----------------------------------------------------------------
Amlogic ARM64 DT for v7.2 v2 take 1:
- Khadas VIM4 (T7 SoC) features:
- Memory layout fixup
- GIC register range
- Model name fixup
- PWM, eMMC, SD card and SDIO support
- PWM LED
- I2C pinctrl node
- Khadas VIM1s Features
- Bluetooth
- PWM LED
- Power Key
- Function Key via SARADC
- RTC
- Remote control keymap
- Bluetooth node for Phicomm N1
----------------------------------------------------------------
Jian Hu (1):
arm64: dts: amlogic: t7: Add clock controller nodes
Jun Yan (1):
arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: add bluetooth node
Nick Xie (9):
arm64: dts: amlogic: meson-s4: add UART_A node
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: enable bluetooth
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: add PWM LED support
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: add POWER key support
arm64: dts: amlogic: meson-s4: add internal SARADC controller
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: add Function key support
arm64: dts: amlogic: meson-s4: add VRTC node
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: enable HYM8563 RTC
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: use rc-khadas keymap
Ronald Claveau (11):
arm64: dts: amlogic: t7: Add eMMC, SD card and SDIO pinctrl nodes
arm64: dts: amlogic: t7: Add PWM pinctrl nodes
arm64: dts: amlogic: t7: khadas-vim4: Add power regulators
arm64: dts: amlogic: t7: Add MMC controller nodes
arm64: dts: amlogic: t7: Add PWM controller nodes
arm64: dts: amlogic: t7: khadas-vim4: Add SDIO power sequence and WiFi clock
arm64: dts: amlogic: t7: khadas-vim4: Add MMC nodes
arm64: dts: amlogic: t7: Fix missing required reset property
arm64: dts: amlogic: t7: khadas-vim4: reorder root node
arm64: dts: amlogic: t7: khadas-vim4: add PWM-driven status LED
arm64: dts: amlogic: t7: Add i2c pinctrl node
.../dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts | 215 +++++++++
arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 482 +++++++++++++++++++++
.../dts/amlogic/meson-gxl-s905d-phicomm-n1.dts | 15 +
.../dts/amlogic/meson-s4-s905y4-khadas-vim1s.dts | 81 ++++
arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 45 ++
5 files changed, 838 insertions(+)
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2026-06-02 7:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-02 7:52 Neil Armstrong [this message]
2026-06-09 12:02 ` Krzysztof Kozlowski
-- strict thread matches above, loose matches on Subject: below --
2026-05-21 13:19 Neil Armstrong
2026-06-01 20:06 ` Linus Walleij
2026-06-02 5:47 ` Martin Blumenstingl
2026-06-02 7:47 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9d4694cb-f596-4538-a437-6f2fbb6304f4@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=arm@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®