From: Michael Riesch <michael.riesch@collabora.com>
To: Amin Gattout <amin.gattout@gmail.com>,
Mehdi Djait <mehdi.djait@linux.intel.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/5] media: rockchip: rkcif: add a callback for the MIPI ID_CTRL1 register
Date: Thu, 1 Oct 2026 17:27:10 +0200 [thread overview]
Message-ID: <00deefd9-9e03-4375-bb1f-b41e8f04e43a@collabora.com> (raw)
In-Reply-To: <20260921-vicap-rk3576-v2-3-0a4582e20c72@gmail.com>
Hi Amin,
Thanks for the patch!
On 9/21/26 17:29, Amin Gattout wrote:
> The contents of the MIPI ID_CTRL1 register differ between variants. The
> RK3568 and RK3588 hold the capture size there, while the RK3576 uses it
> for the virtual channel and data type filter.
>
> Let each variant provide a callback that builds the register value, in
> preparation for the RK3576 support. Variants that do not provide one
> keep writing the capture size, so their behavior is unchanged.
>
> Signed-off-by: Amin Gattout <amin.gattout@gmail.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Best regards,
Michael
> ---
> drivers/media/platform/rockchip/rkcif/rkcif-capture-mipi.c | 5 ++++-
> drivers/media/platform/rockchip/rkcif/rkcif-common.h | 2 ++
> 2 files changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/platform/rockchip/rkcif/rkcif-capture-mipi.c b/drivers/media/platform/rockchip/rkcif/rkcif-capture-mipi.c
> index e0acb9049ca1..432f47a1fc23 100644
> --- a/drivers/media/platform/rockchip/rkcif/rkcif-capture-mipi.c
> +++ b/drivers/media/platform/rockchip/rkcif/rkcif-capture-mipi.c
> @@ -749,7 +749,10 @@ static int rkcif_mipi_start_streaming(struct rkcif_stream *stream)
> if (match_data->mipi_ctrl0)
> ctrl0 = match_data->mipi_ctrl0(stream, active_out_fmt);
>
> - ctrl1 = RKCIF_XY_COORD(width, height);
> + if (match_data->mipi_ctrl1)
> + ctrl1 = match_data->mipi_ctrl1(stream, active_out_fmt);
> + else
> + ctrl1 = RKCIF_XY_COORD(width, height);
>
> int_mask |= RKCIF_MIPI_INT_FRAME0_END(stream->id);
> int_mask |= RKCIF_MIPI_INT_FRAME1_END(stream->id);
> diff --git a/drivers/media/platform/rockchip/rkcif/rkcif-common.h b/drivers/media/platform/rockchip/rkcif/rkcif-common.h
> index 4d9211ba9bda..f83c8099b78e 100644
> --- a/drivers/media/platform/rockchip/rkcif/rkcif-common.h
> +++ b/drivers/media/platform/rockchip/rkcif/rkcif-common.h
> @@ -207,6 +207,8 @@ struct rkcif_mipi_match_data {
> unsigned int regs_id[RKCIF_ID_MAX][RKCIF_MIPI_ID_REGISTER_MAX];
> u32 (*mipi_ctrl0)(struct rkcif_stream *stream,
> const struct rkcif_output_fmt *active_out_fmt);
> + u32 (*mipi_ctrl1)(struct rkcif_stream *stream,
> + const struct rkcif_output_fmt *active_out_fmt);
> struct {
> unsigned int offset;
> } blocks[RKCIF_MIPI_MAX - RKCIF_MIPI_BASE];
>
next prev parent reply other threads:[~2026-10-01 15:27 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-21 15:29 [PATCH v2 0/5] media: rockchip: add support for the RK3576 Video Capture unit Amin Gattout
2026-09-21 15:29 ` [PATCH v2 1/5] media: dt-bindings: add rockchip rk3576 vicap Amin Gattout
2026-09-23 14:51 ` Mehdi Djait
2026-09-21 15:29 ` [PATCH v2 2/5] media: rockchip: rkcif: add a register index for the MIPI capture size Amin Gattout
2026-09-23 14:52 ` Mehdi Djait
2026-10-01 15:24 ` Michael Riesch
2026-09-21 15:29 ` [PATCH v2 3/5] media: rockchip: rkcif: add a callback for the MIPI ID_CTRL1 register Amin Gattout
2026-09-23 14:53 ` Mehdi Djait
2026-10-01 15:27 ` Michael Riesch [this message]
2026-09-21 15:30 ` [PATCH v2 4/5] media: rockchip: rkcif: add support for rk3576 vicap mipi capture Amin Gattout
2026-09-23 14:55 ` Mehdi Djait
2026-10-01 15:30 ` Michael Riesch
2026-09-21 15:30 ` [PATCH v2 5/5] arm64: dts: rockchip: add vicap node to rk3576 Amin Gattout
2026-09-23 14:56 ` Mehdi Djait
2026-09-23 14:35 ` [PATCH v2 0/5] media: rockchip: add support for the RK3576 Video Capture unit Mehdi Djait
2026-10-05 19:06 ` (subset) " Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00deefd9-9e03-4375-bb1f-b41e8f04e43a@collabora.com \
--to=michael.riesch@collabora.com \
--cc=amin.gattout@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=mehdi.djait@linux.intel.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®