mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Joshua Henderson <joshua.henderson@microchip.com>
To: <linux-kernel@vger.kernel.org>
Cc: <linux-mips@linux-mips.org>, <ralf@linux-mips.org>,
	Andrei Pistirica <andrei.pistirica@microchip.com>,
	Joshua Henderson <joshua.henderson@microchip.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Jean Delvare <jdelvare@suse.de>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Corneliu Doban <cdoban@broadcom.com>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Luis de Bethencourt <luisbg@osg.samsung.com>,
	Weijun Yang <Weijun.Yang@csr.com>,
	Lokesh Vutla <lokeshvutla@ti.com>,
	Scott Branden <sbranden@broadcom.com>,
	Vincent Yang <vincent.yang.fujitsu@gmail.com>,
	Chaotian Jing <chaotian.jing@mediatek.com>,
	"ludovic.desroches@atmel.com" <ludovic.desroches@atmel.com>,
	Shawn Lin <shawn.lin@rock-chips.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	yangbo lu <yangbo.lu@freescale.com>,
	Kevin Hao <haokexin@gmail.com>,
	Ben Hutchings <ben@decadent.org.uk>,
	Andy Green <andy.green@linaro.org>, <linux-mmc@vger.kernel.org>
Subject: [PATCH v2 12/14] mmc: sdhci-pic32: Add PIC32 SDHCI host controller driver
Date: Mon, 14 Dec 2015 15:42:14 -0700	[thread overview]
Message-ID: <1450133093-7053-13-git-send-email-joshua.henderson@microchip.com> (raw)
In-Reply-To: <1450133093-7053-1-git-send-email-joshua.henderson@microchip.com>

From: Andrei Pistirica <andrei.pistirica@microchip.com>

This driver supports the SDHCI host controller found on a PIC32.

Signed-off-by: Andrei Pistirica <andrei.pistirica@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
---
 drivers/mmc/host/Kconfig       |   11 ++
 drivers/mmc/host/Makefile      |    1 +
 drivers/mmc/host/sdhci-pic32.c |  291 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 303 insertions(+)
 create mode 100644 drivers/mmc/host/sdhci-pic32.c

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1dee533..1a3a42b 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -785,3 +785,14 @@ config MMC_MTK
 	  If you have a machine with a integrated SD/MMC card reader, say Y or M here.
 	  This is needed if support for any SD/SDIO/MMC devices is required.
 	  If unsure, say N.
+
+config MMC_SDHCI_MICROCHIP_PIC32
+        tristate "Microchip PIC32MZDA SDHCI support"
+        depends on MMC_SDHCI && PIC32MZDA
+        help
+          This selects the Secure Digital Host Controller Interface (SDHCI)
+          for PIC32MZDA platform.
+
+          If you have a controller with this interface, say Y or M here.
+
+          If unsure, say N.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 3595f83..af918d2 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -75,6 +75,7 @@ obj-$(CONFIG_MMC_SDHCI_BCM2835)		+= sdhci-bcm2835.o
 obj-$(CONFIG_MMC_SDHCI_IPROC)		+= sdhci-iproc.o
 obj-$(CONFIG_MMC_SDHCI_MSM)		+= sdhci-msm.o
 obj-$(CONFIG_MMC_SDHCI_ST)		+= sdhci-st.o
+obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32)	+= sdhci-pic32.o
 
 ifeq ($(CONFIG_CB710_DEBUG),y)
 	CFLAGS-cb710-mmc	+= -DDEBUG
diff --git a/drivers/mmc/host/sdhci-pic32.c b/drivers/mmc/host/sdhci-pic32.c
new file mode 100644
index 0000000..b7d7da2
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pic32.c
@@ -0,0 +1,291 @@
+/*
+ * Support of SDHCI platform devices for Microchip PIC32.
+ *
+ * Copyright (C) 2015 Microchip
+ * Andrei Pistirica, Paul Thacker
+ *
+ * Inspired by sdhci-pltfm.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/mmc/host.h>
+#include <linux/io.h>
+#include "sdhci.h"
+#include <linux/platform_data/sdhci-pic32.h>
+
+#define SDH_SHARED_BUS_CTRL		0x000000E0
+#define SDH_SHARED_BUS_NR_CLK_PINS_MASK	0x7
+#define SDH_SHARED_BUS_NR_IRQ_PINS_MASK	0x30
+#define SDH_SHARED_BUS_CLK_PINS		0x10
+#define SDH_SHARED_BUS_IRQ_PINS		0x14
+#define SDH_CAPS_SDH_SLOT_TYPE_MASK	0xC0000000
+#define SDH_SLOT_TYPE_REMOVABLE		0x0
+#define SDH_SLOT_TYPE_EMBEDDED		0x1
+#define SDH_SLOT_TYPE_SHARED_BUS	0x2
+#define SDHCI_CTRL_CDSSEL		0x80
+#define SDHCI_CTRL_CDTLVL		0x40
+
+#define ADMA_FIFO_RD_THSHLD	512
+#define ADMA_FIFO_WR_THSHLD	512
+
+#define DEV_NAME "pic32-sdhci"
+
+struct pic32_sdhci_pdata {
+	struct platform_device	*pdev;
+	struct clk *sys_clk;
+	struct clk *base_clk;
+};
+
+static unsigned int pic32_sdhci_get_max_clock(struct sdhci_host *host)
+{
+	struct pic32_sdhci_pdata *sdhci_pdata = sdhci_priv(host);
+
+	return clk_get_rate(sdhci_pdata->base_clk);
+}
+
+static void pic32_sdhci_set_bus_width(struct sdhci_host *host, int width)
+{
+	u8 ctrl;
+
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+	if (width == MMC_BUS_WIDTH_8) {
+		ctrl &= ~SDHCI_CTRL_4BITBUS;
+		if (host->version >= SDHCI_SPEC_300)
+			ctrl |= SDHCI_CTRL_8BITBUS;
+	} else {
+		if (host->version >= SDHCI_SPEC_300)
+			ctrl &= ~SDHCI_CTRL_8BITBUS;
+		if (width == MMC_BUS_WIDTH_4)
+			ctrl |= SDHCI_CTRL_4BITBUS;
+		else
+			ctrl &= ~SDHCI_CTRL_4BITBUS;
+	}
+	/*
+	 * SDHCI will not work if JTAG is not Connected.As a workaround fix,
+	 * set Card Detect Signal Selection bit in SDHCI Host Control
+	 * register and clear Card Detect Test Level bit in SDHCI Host
+	 * Control register.
+	 */
+	ctrl &= ~SDHCI_CTRL_CDTLVL;
+	ctrl |= SDHCI_CTRL_CDSSEL;
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+
+static unsigned int pic32_sdhci_get_ro(struct sdhci_host *host)
+{
+	/*
+	 * The SDHCI_WRITE_PROTECT bit is unstable on current hardware so we
+	 * can't depend on its value in any way.
+	 */
+	return 0;
+}
+
+static const struct sdhci_ops pic32_sdhci_ops = {
+	.get_max_clock = pic32_sdhci_get_max_clock,
+	.set_clock = sdhci_set_clock,
+	.set_bus_width = pic32_sdhci_set_bus_width,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+	.get_ro = pic32_sdhci_get_ro,
+};
+
+static void pic32_sdhci_shared_bus(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	u32 bus = readl(host->ioaddr + SDH_SHARED_BUS_CTRL);
+	u32 clk_pins = (bus & SDH_SHARED_BUS_NR_CLK_PINS_MASK) >> 0;
+	u32 irq_pins = (bus & SDH_SHARED_BUS_NR_IRQ_PINS_MASK) >> 4;
+
+	/* select first clock */
+	if (clk_pins & 0x1)
+		bus |= (0x1 << SDH_SHARED_BUS_CLK_PINS);
+
+	/* select first interrupt */
+	if (irq_pins & 0x1)
+		bus |= (0x1 << SDH_SHARED_BUS_IRQ_PINS);
+
+	writel(bus, host->ioaddr + SDH_SHARED_BUS_CTRL);
+}
+
+static int pic32_sdhci_probe_platform(struct platform_device *pdev,
+				      struct pic32_sdhci_pdata *pdata)
+{
+	int ret = 0;
+	u32 caps_slot_type;
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+
+	/* Check card slot connected on shared bus. */
+	host->caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
+	caps_slot_type = (host->caps & SDH_CAPS_SDH_SLOT_TYPE_MASK) >> 30;
+	if (caps_slot_type == SDH_SLOT_TYPE_SHARED_BUS)
+		pic32_sdhci_shared_bus(pdev);
+
+	return ret;
+}
+
+static int pic32_sdhci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sdhci_host *host;
+	struct resource *iomem;
+	struct pic32_sdhci_pdata *sdhci_pdata;
+	struct pic32_sdhci_platform_data *plat_data;
+	unsigned int clk_rate = 0;
+	int ret;
+	struct pinctrl *pinctrl;
+
+	host = sdhci_alloc_host(dev, sizeof(*sdhci_pdata));
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		dev_err(&pdev->dev, "cannot allocate memory for sdhci\n");
+		goto err;
+	}
+
+	sdhci_pdata = sdhci_priv(host);
+	sdhci_pdata->pdev = pdev;
+	platform_set_drvdata(pdev, host);
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host->ioaddr = devm_ioremap_resource(&pdev->dev, iomem);
+	if (IS_ERR(host->ioaddr)) {
+		ret = PTR_ERR(host->ioaddr);
+		dev_err(&pdev->dev, "unable to map iomem: %d\n", ret);
+		goto err_host;
+	}
+
+	plat_data = pdev->dev.platform_data;
+	if (plat_data && plat_data->setup_dma) {
+		ret = plat_data->setup_dma(ADMA_FIFO_RD_THSHLD,
+					   ADMA_FIFO_WR_THSHLD);
+		if (ret)
+			goto err_host;
+	}
+
+	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+	if (IS_ERR(pinctrl)) {
+		ret = PTR_ERR(pinctrl);
+		dev_warn(&pdev->dev, "No pinctrl provided %d\n", ret);
+		if (ret == -EPROBE_DEFER)
+			goto err_host;
+	}
+
+	host->ops = &pic32_sdhci_ops;
+	host->irq = platform_get_irq(pdev, 0);
+
+	sdhci_pdata->sys_clk = devm_clk_get(&pdev->dev, "sys_clk");
+	if (IS_ERR(sdhci_pdata->sys_clk)) {
+		ret = PTR_ERR(sdhci_pdata->sys_clk);
+		dev_err(&pdev->dev, "Error getting clock\n");
+		goto err_host;
+	}
+
+	/* Enable clock when available! */
+	ret = clk_prepare_enable(sdhci_pdata->sys_clk);
+	if (ret) {
+		dev_dbg(&pdev->dev, "Error enabling clock\n");
+		goto err_host;
+	}
+
+	/* SDH CLK enable */
+	sdhci_pdata->base_clk = devm_clk_get(&pdev->dev, "base_clk");
+	if (IS_ERR(sdhci_pdata->base_clk)) {
+		ret = PTR_ERR(sdhci_pdata->base_clk);
+		dev_err(&pdev->dev, "Error getting clock\n");
+		goto err_host;
+	}
+
+	/* Enable clock when available! */
+	ret = clk_prepare_enable(sdhci_pdata->base_clk);
+	if (ret) {
+		dev_dbg(&pdev->dev, "Error enabling clock\n");
+		goto err_host;
+	}
+
+	clk_rate = clk_get_rate(sdhci_pdata->base_clk);
+	dev_dbg(&pdev->dev, "base clock at: %u\n", clk_rate);
+	clk_rate = clk_get_rate(sdhci_pdata->sys_clk);
+	dev_dbg(&pdev->dev, "sys clock at: %u\n", clk_rate);
+
+	host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
+
+	host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
+
+	ret = mmc_of_parse(host->mmc);
+	if (ret)
+		goto err_host;
+
+	ret = pic32_sdhci_probe_platform(pdev, sdhci_pdata);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to probe platform!\n");
+		goto err_host;
+	}
+
+	ret = sdhci_add_host(host);
+	if (ret) {
+		dev_dbg(&pdev->dev, "error adding host\n");
+		goto err_host;
+	}
+
+	dev_info(&pdev->dev, "Successfully added sdhci host\n");
+	return 0;
+
+err_host:
+	sdhci_free_host(host);
+err:
+	dev_err(&pdev->dev, "pic32-sdhci probe failed: %d\n", ret);
+	return ret;
+}
+
+static int pic32_sdhci_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct pic32_sdhci_pdata *sdhci_pdata = sdhci_priv(host);
+	int dead = 0;
+	u32 scratch;
+
+	scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
+	if (scratch == (u32)-1)
+		dead = 1;
+
+	sdhci_remove_host(host, dead);
+	clk_disable_unprepare(sdhci_pdata->base_clk);
+	clk_disable_unprepare(sdhci_pdata->sys_clk);
+	sdhci_free_host(host);
+
+	return 0;
+}
+
+static const struct of_device_id pic32_sdhci_id_table[] = {
+	{ .compatible = "microchip,pic32mzda-sdhci" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pic32_sdhci_id_table);
+
+static struct platform_driver pic32_sdhci_driver = {
+	.driver = {
+		.name	= DEV_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(pic32_sdhci_id_table),
+	},
+	.probe		= pic32_sdhci_probe,
+	.remove		= pic32_sdhci_remove,
+};
+
+module_platform_driver(pic32_sdhci_driver);
+
+MODULE_DESCRIPTION("Microchip PIC32 SDHCI driver");
+MODULE_AUTHOR("Pistirica Sorin Andrei & Sandeep Sheriker");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5


  parent reply	other threads:[~2015-12-14 22:40 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-14 22:42 [PATCH v2 00/14] Initial Microchip PIC32MZDA Support Joshua Henderson
2015-12-14 22:42 ` [PATCH v2 01/14] DEVICETREE: Add bindings for PIC32 interrupt controller Joshua Henderson
2015-12-14 23:34   ` Rob Herring
2015-12-14 22:42 ` [PATCH v2 02/14] irqchip: irq-pic32-evic: Add support " Joshua Henderson
2015-12-15 17:00   ` Marc Zyngier
2016-01-05 17:50     ` Joshua Henderson
2015-12-14 22:42 ` [PATCH v2 03/14] DEVICETREE: Add PIC32 clock binding documentation Joshua Henderson
2015-12-18 15:44   ` Rob Herring
2015-12-19 11:48     ` Purna Chandra Mandal
2015-12-14 22:42 ` [PATCH v2 04/14] clk: clk-pic32: Add PIC32 clock driver Joshua Henderson
2015-12-14 22:42 ` [PATCH v2 05/14] DEVICETREE: Add bindings for PIC32/MZDA platforms Joshua Henderson
2015-12-18 15:47   ` Rob Herring
2015-12-14 22:42 ` [PATCH v2 06/14] MIPS: Add support for PIC32MZDA platform Joshua Henderson
2015-12-14 22:42 ` [PATCH v2 07/14] DEVICETREE: Add bindings for PIC32 pin control and GPIO Joshua Henderson
2015-12-15 19:58   ` Rob Herring
2015-12-14 22:42 ` [PATCH v2 08/14] pinctrl: pinctrl-pic32: Add PIC32 pin control driver Joshua Henderson
2015-12-14 22:42 ` [PATCH v2 09/14] DEVICETREE: Add bindings for PIC32 UART driver Joshua Henderson
2015-12-15 20:00   ` Rob Herring
2015-12-14 22:42 ` [PATCH v2 10/14] serial: pic32_uart: Add " Joshua Henderson
2015-12-20 16:13   ` Andy Shevchenko
2016-01-05 20:29     ` Paul.Thacker
2016-01-05 20:43   ` One Thousand Gnomes
2016-01-06 22:00     ` Paul.Thacker
2016-01-06 22:32       ` One Thousand Gnomes
2015-12-14 22:42 ` [PATCH v2 11/14] DEVICETREE: Add bindings for PIC32 SDHCI host controller Joshua Henderson
2015-12-15 20:00   ` Rob Herring
2015-12-14 22:42 ` Joshua Henderson [this message]
2015-12-15  0:32   ` [PATCH v2 12/14] mmc: sdhci-pic32: Add PIC32 SDHCI host controller driver Andy Green
2015-12-16 17:35     ` Paul.Thacker
2015-12-16 10:48   ` Ulf Hansson
2015-12-17 18:05     ` Paul.Thacker
2015-12-14 22:42 ` [PATCH v2 13/14] MIPS: dts: Add initial DTS for the PIC32MZDA Starter Kit Joshua Henderson
2015-12-14 22:42 ` [PATCH v2 14/14] MIPS: pic32mzda: Add initial PIC32MZDA Starter Kit defconfig Joshua Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450133093-7053-13-git-send-email-joshua.henderson@microchip.com \
    --to=joshua.henderson@microchip.com \
    --cc=Weijun.Yang@csr.com \
    --cc=andrei.pistirica@microchip.com \
    --cc=andy.green@linaro.org \
    --cc=ben@decadent.org.uk \
    --cc=cdoban@broadcom.com \
    --cc=chaotian.jing@mediatek.com \
    --cc=geert@linux-m68k.org \
    --cc=haojian.zhuang@gmail.com \
    --cc=haokexin@gmail.com \
    --cc=jdelvare@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=ludovic.desroches@atmel.com \
    --cc=luisbg@osg.samsung.com \
    --cc=ralf@linux-mips.org \
    --cc=sboyd@codeaurora.org \
    --cc=sbranden@broadcom.com \
    --cc=shawn.lin@rock-chips.com \
    --cc=ulf.hansson@linaro.org \
    --cc=vincent.yang.fujitsu@gmail.com \
    --cc=yangbo.lu@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®