mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Lukas Wunner <lukas@wunner.de>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-kernel@vger.kernel.org
Cc: Andreas Noever <andreas.noever@gmail.com>,
	linux-pci@vger.kernel.org, linux-pm@vger.kernel.org,
	Bjorn Helgaas <helgaas@kernel.org>,
	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>
Subject: [PATCH v5 2/8] PCI: Allow runtime PM on Thunderbolt ports
Date: Sun, 15 Jan 2017 21:03:45 +0100	[thread overview]
Message-ID: <14d64f19bc1b1ea67371b8336dca618edddc0b52.1484486499.git.lukas@wunner.de> (raw)
In-Reply-To: <cover.1484486499.git.lukas@wunner.de>

Currently PCIe ports are only allowed to go to D3 if the BIOS is dated
2015 or newer to avoid potential issues with old chipsets.  However for
Thunderbolt we know that even the oldest controller, Light Ridge (2010),
is able to suspend its ports to D3 just fine.

We're about to add runtime PM for Thunderbolt on the Mac.  Apple has
released two EFI security updates in 2015 which encompass all machines
with Thunderbolt, but the achieved power saving should be made available
to users even if they haven't updated their BIOS.  To this end,
special-case Thunderbolt in pci_bridge_d3_possible().

This allows the Thunderbolt controller to power down but the root port
to which the Thunderbolt controller is attached remains in D0 unless
the EFI update is installed.  Users can pass pcie_port_pm=force on the
kernel command line if they cannot install the EFI update but still want
to benefit from the additional power saving of putting the root port
into D3.  In practice, root ports can be suspended to D3 without issues
at least on 2012 Ivy Bridge machines.

If the BIOS cut-off date is ever lowered to 2010, the Thunderbolt
special case can be removed.

Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Amir Levy <amir.jer.levy@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
---
 drivers/pci/pci.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index a881c0d3d2e8..8ed098db82e1 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2224,7 +2224,7 @@ void pci_config_pm_runtime_put(struct pci_dev *pdev)
  * @bridge: Bridge to check
  *
  * This function checks if it is possible to move the bridge to D3.
- * Currently we only allow D3 for recent enough PCIe ports.
+ * Currently we only allow D3 for recent enough PCIe ports and Thunderbolt.
  */
 bool pci_bridge_d3_possible(struct pci_dev *bridge)
 {
@@ -2258,6 +2258,11 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge)
 		    year >= 2015) {
 			return true;
 		}
+
+		/* Even the oldest 2010 Thunderbolt controller supports D3. */
+		if (bridge->is_thunderbolt)
+			return true;
+
 		break;
 	}
 
-- 
2.11.0

  reply	other threads:[~2017-01-15 20:04 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-15 20:03 [PATCH v5 0/8] Runtime PM for Thunderbolt on Macs Lukas Wunner
2017-01-15 20:03 ` Lukas Wunner [this message]
2017-01-28 22:09   ` [PATCH v5 2/8] PCI: Allow runtime PM on Thunderbolt ports Bjorn Helgaas
2017-01-30  7:15     ` Rafael J. Wysocki
2017-02-10 17:57       ` Bjorn Helgaas
2017-01-15 20:03 ` [PATCH v5 1/8] PCI: Recognize Thunderbolt devices Lukas Wunner
2017-01-28 21:52   ` Bjorn Helgaas
2017-01-29  0:26     ` Lukas Wunner
2017-02-06  6:09       ` Lukas Wunner
2017-02-10 17:42       ` Bjorn Helgaas
2017-02-12 16:50         ` Lukas Wunner
2017-01-15 20:03 ` [PATCH v5 7/8] thunderbolt: Power down controller when idle Lukas Wunner
2017-01-28 23:32   ` Bjorn Helgaas
2017-02-12 16:31     ` Lukas Wunner
2017-02-13 22:57       ` Bjorn Helgaas
2017-01-15 20:03 ` [PATCH v5 3/8] PCI: Don't block runtime PM for Thunderbolt host hotplug ports Lukas Wunner
2017-01-16 10:29   ` Mika Westerberg
2017-01-28 23:00   ` Bjorn Helgaas
2017-02-10 18:39   ` Bjorn Helgaas
2017-02-12 17:13     ` Lukas Wunner
2017-02-13 12:17       ` Rafael J. Wysocki
2017-01-15 20:03 ` [PATCH v5 5/8] PM: Make requirements of dev_pm_domain_set() more precise Lukas Wunner
2017-01-28 23:14   ` Bjorn Helgaas
2017-01-15 20:03 ` [PATCH v5 8/8] thunderbolt: Runtime suspend NHI when idle Lukas Wunner
2017-01-15 20:03 ` [PATCH v5 4/8] Revert "PM / Runtime: Remove the exported function pm_children_suspended()" Lukas Wunner
2017-01-15 20:03 ` [PATCH v5 6/8] PM / sleep: Define constant for direct_complete Lukas Wunner
2017-01-19 10:38 ` [PATCH v5 0/8] Runtime PM for Thunderbolt on Macs Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=14d64f19bc1b1ea67371b8336dca618edddc0b52.1484486499.git.lukas@wunner.de \
    --to=lukas@wunner.de \
    --cc=andreas.noever@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=rafael.j.wysocki@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®