From: Philipp Zabel <p.zabel@pengutronix.de>
To: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>,
linux-usb@vger.kernel.org,
Vivek Gautam <vivek.gautam@codeaurora.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Felipe Balbi <balbi@kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] usb: dwc3: of-simple: use managed and shared reset control
Date: Tue, 03 Apr 2018 10:46:18 +0200 [thread overview]
Message-ID: <1522745178.5089.10.camel@pengutronix.de> (raw)
In-Reply-To: <CAK7LNARmw5-d5v41GRPhmVk69obK0gVt_EEGnpydk3GU2UaV9Q@mail.gmail.com>
On Tue, 2018-04-03 at 17:30 +0900, Masahiro Yamada wrote:
> 2018-04-03 17:00 GMT+09:00 Philipp Zabel <p.zabel@pengutronix.de>:
> > On Thu, 2018-03-29 at 15:07 +0900, Masahiro Yamada wrote:
> > > This driver handles the reset control in a common manner; deassert
> > > resets before use, assert them after use. There is no good reason
> > > why it should be exclusive.
> >
> > Is this preemptive cleanup, or do you have hardware on the horizon that
> > shares these reset lines with other peripherals?
>
> This patch is necessary for Socionext SoCs.
>
> The same reset lines are shared between
> this dwc3-of_simple and other glue circuits.
Thanks, this is helpful information.
> > > Also, use devm_ for clean-up.
> > >
> > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> > > ---
> > >
> > > CCing Philipp Zabel.
> > > I see his sob in commit 06c47e6286d5.
> >
> > At the time I was concerned with the reset_control_array addition and
> > didn't look closely at the exclusive vs shared issue.
> > > drivers/usb/dwc3/dwc3-of-simple.c | 7 ++-----
> > > 1 file changed, 2 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
> > > index e54c362..bd6ab65 100644
> > > --- a/drivers/usb/dwc3/dwc3-of-simple.c
> > > +++ b/drivers/usb/dwc3/dwc3-of-simple.c
> > > @@ -91,7 +91,7 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
> > > platform_set_drvdata(pdev, simple);
> > > simple->dev = dev;
> > >
> > > - simple->resets = of_reset_control_array_get_optional_exclusive(np);
> > > + simple->resets = devm_reset_control_array_get_optional_shared(dev);
> >
> > From the usage in the driver, it does indeed look like _shared reset
> > usage is appropriate. I assume that the hardware has no need for the
> > reset to be asserted right before probe or after remove, it just
> > requires that the reset line is kept deasserted while the driver is
> > probed.
> >
> > > if (IS_ERR(simple->resets)) {
> > > ret = PTR_ERR(simple->resets);
> > > dev_err(dev, "failed to get device resets, err=%d\n", ret);
> > > @@ -100,7 +100,7 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
> > >
> > > ret = reset_control_deassert(simple->resets);
> > > if (ret)
> > > - goto err_resetc_put;
> > > + return ret;
> > >
> > > ret = dwc3_of_simple_clk_init(simple, of_count_phandle_with_args(np,
> > > "clocks", "#clock-cells"));
> > > @@ -126,8 +126,6 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
> > > err_resetc_assert:
> > > reset_control_assert(simple->resets);
> > >
> > > -err_resetc_put:
> > > - reset_control_put(simple->resets);
> > > return ret;
> > > }
> > >
> > > @@ -146,7 +144,6 @@ static int dwc3_of_simple_remove(struct platform_device *pdev)
> > > simple->num_clocks = 0;
> > >
> > > reset_control_assert(simple->resets);
> > > - reset_control_put(simple->resets);
> > >
> > > pm_runtime_put_sync(dev);
> > > pm_runtime_disable(dev);
> >
> > Changing to devm_ changes the order here. Whether or not it could be a
> > problem to assert the reset only after pm_runtime_put (or potentially
> > never), I can't say. I assume this is a non-issue, but somebody who
> > knows the hardware better would have to decide.
>
>
>
> I do not understand what you mean.
Sorry for the confusion, I have mixed up things here.
> Can you describe your concern in more details?
>
> I am not touching reset_control_assert() here.
With the change to shared reset control, reset_control_assert
potentially does nothing, so it could be possible that
pm_runtime_put_sync cuts the power before the reset es asserted again.
> I am delaying the call for reset_control_put().
Yes, please disregard my comment about the devm_ change, that should
have no effect whatsoever and looks fine to me.
> If I understand reset_control_put() correctly,
> the effects of this change are:
> - The ref_count and module ownership for the reset controller
> driver will be held a little longer
> - The call for kfree() will be a little bit delayed.
Correct.
> Why do you need knowledge about this hardware?
Is it ok to keep the reset deasserted while the power is cut? Or do you
have to guarantee that drivers sharing the same reset also keep the same
power domains active?
regards
Philipp
next prev parent reply other threads:[~2018-04-03 8:46 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-29 6:07 Masahiro Yamada
2018-04-03 8:00 ` Philipp Zabel
2018-04-03 8:30 ` Masahiro Yamada
2018-04-03 8:46 ` Philipp Zabel [this message]
2018-04-03 10:19 ` Masahiro Yamada
2018-04-03 10:35 ` Vivek Gautam
2018-04-04 1:25 ` Masahiro Yamada
2018-04-04 8:18 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1522745178.5089.10.camel@pengutronix.de \
--to=p.zabel@pengutronix.de \
--cc=balbi@kernel.org \
--cc=felipe.balbi@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=vivek.gautam@codeaurora.org \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®