From: "Baicar, Tyler" <tbaicar@codeaurora.org>
To: Dongjiu Geng <gengdongjiu@huawei.com>,
bp@suse.de, james.morse@arm.com, geliangtang@gmail.com,
andriy.shevchenko@linux.intel.com, tony.luck@intel.com,
austinwc@codeaurora.org, rjw@rjwysocki.net, lenb@kernel.org,
linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
linuxarm@huawei.com, john.garry@huawei.com,
shiju.jose@huawei.com, zhengqiang10@huawei.com,
wangxiongfeng2@huawei.com
Cc: huangshaoyu@huawei.com, wuquanming@huawei.com
Subject: Re: [PATCH v3] acpi: apei: fix the wrongly iterate generic error status block
Date: Wed, 16 Aug 2017 07:55:37 -0600 [thread overview]
Message-ID: <1f5b068b-74a5-3be1-46ef-a1bb522c2791@codeaurora.org> (raw)
In-Reply-To: <1502871290-28137-1-git-send-email-gengdongjiu@huawei.com>
On 8/16/2017 2:14 AM, Dongjiu Geng wrote:
> The revision 0x300 generic error data entry is different
> from the old version, but currently iterating through the
> GHES estatus blocks does not take into account this difference.
> This will lead to failure to get the right data entry if GHES
> has revision 0x300 error data entry.
>
> Update the GHES estatus iteration to properly increment using
> acpi_hest_get_next, and correct the iteration termination condition
> because the status block data length only includes error data length.
> Clear the CPER estatus printing iteration logic to use same macro.
>
> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
> CC: Tyler Baicar <tbaicar@codeaurora.org>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
Works good for me!
Thanks,
Tyler
> ---
> drivers/acpi/apei/apei-internal.h | 5 -----
> drivers/firmware/efi/cper.c | 12 ++----------
> include/acpi/ghes.h | 5 +++++
> 3 files changed, 7 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/acpi/apei/apei-internal.h b/drivers/acpi/apei/apei-internal.h
> index 6e9f14c0a71b..cb4126051f62 100644
> --- a/drivers/acpi/apei/apei-internal.h
> +++ b/drivers/acpi/apei/apei-internal.h
> @@ -120,11 +120,6 @@ int apei_exec_collect_resources(struct apei_exec_context *ctx,
> struct dentry;
> struct dentry *apei_get_debugfs_dir(void);
>
> -#define apei_estatus_for_each_section(estatus, section) \
> - for (section = (struct acpi_hest_generic_data *)(estatus + 1); \
> - (void *)section - (void *)estatus < estatus->data_length; \
> - section = (void *)(section+1) + section->error_data_length)
> -
> static inline u32 cper_estatus_len(struct acpi_hest_generic_status *estatus)
> {
> if (estatus->raw_data_length)
> diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
> index 48a8f69da42a..bf3672a81e49 100644
> --- a/drivers/firmware/efi/cper.c
> +++ b/drivers/firmware/efi/cper.c
> @@ -606,7 +606,6 @@ void cper_estatus_print(const char *pfx,
> const struct acpi_hest_generic_status *estatus)
> {
> struct acpi_hest_generic_data *gdata;
> - unsigned int data_len;
> int sec_no = 0;
> char newpfx[64];
> __u16 severity;
> @@ -617,14 +616,10 @@ void cper_estatus_print(const char *pfx,
> "It has been corrected by h/w "
> "and requires no further action");
> printk("%s""event severity: %s\n", pfx, cper_severity_str(severity));
> - data_len = estatus->data_length;
> - gdata = (struct acpi_hest_generic_data *)(estatus + 1);
> snprintf(newpfx, sizeof(newpfx), "%s%s", pfx, INDENT_SP);
>
> - while (data_len >= acpi_hest_get_size(gdata)) {
> + apei_estatus_for_each_section(estatus, gdata) {
> cper_estatus_print_section(newpfx, gdata, sec_no);
> - data_len -= acpi_hest_get_record_size(gdata);
> - gdata = acpi_hest_get_next(gdata);
> sec_no++;
> }
> }
> @@ -653,15 +648,12 @@ int cper_estatus_check(const struct acpi_hest_generic_status *estatus)
> if (rc)
> return rc;
> data_len = estatus->data_length;
> - gdata = (struct acpi_hest_generic_data *)(estatus + 1);
>
> - while (data_len >= acpi_hest_get_size(gdata)) {
> + apei_estatus_for_each_section(estatus, gdata) {
> gedata_len = acpi_hest_get_error_length(gdata);
> if (gedata_len > data_len - acpi_hest_get_size(gdata))
> return -EINVAL;
> -
> data_len -= acpi_hest_get_record_size(gdata);
> - gdata = acpi_hest_get_next(gdata);
> }
> if (data_len)
> return -EINVAL;
> diff --git a/include/acpi/ghes.h b/include/acpi/ghes.h
> index 9f26e01186ae..9061c5c743b3 100644
> --- a/include/acpi/ghes.h
> +++ b/include/acpi/ghes.h
> @@ -113,6 +113,11 @@ static inline void *acpi_hest_get_next(struct acpi_hest_generic_data *gdata)
> return (void *)(gdata) + acpi_hest_get_record_size(gdata);
> }
>
> +#define apei_estatus_for_each_section(estatus, section) \
> + for (section = (struct acpi_hest_generic_data *)(estatus + 1); \
> + (void *)section - (void *)(estatus + 1) < estatus->data_length; \
> + section = acpi_hest_get_next(section))
> +
> int ghes_notify_sea(void);
>
> #endif /* GHES_H */
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2017-08-16 13:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-16 8:14 Dongjiu Geng
2017-08-16 13:55 ` Baicar, Tyler [this message]
2017-08-17 3:09 ` gengdongjiu
2017-08-17 9:25 ` Borislav Petkov
2017-08-17 10:45 ` gengdongjiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1f5b068b-74a5-3be1-46ef-a1bb522c2791@codeaurora.org \
--to=tbaicar@codeaurora.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=austinwc@codeaurora.org \
--cc=bp@suse.de \
--cc=geliangtang@gmail.com \
--cc=gengdongjiu@huawei.com \
--cc=huangshaoyu@huawei.com \
--cc=james.morse@arm.com \
--cc=john.garry@huawei.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=rjw@rjwysocki.net \
--cc=shiju.jose@huawei.com \
--cc=tony.luck@intel.com \
--cc=wangxiongfeng2@huawei.com \
--cc=wuquanming@huawei.com \
--cc=zhengqiang10@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®