From: Borislav Petkov <bp@alien8.de>
To: Laszlo Ersek <lersek@redhat.com>
Cc: edk2-devel@lists.sourceforge.net,
David Woodhouse <dwmw2@infradead.org>,
linux-efi@vger.kernel.org, lkml <linux-kernel@vger.kernel.org>,
Gleb Natapov <gleb@redhat.com>,
Matthew Garrett <mjg59@srcf.ucam.org>
Subject: Re: [edk2] Corrupted EFI region
Date: Mon, 5 Aug 2013 18:47:31 +0200 [thread overview]
Message-ID: <20130805164731.GG31845@pd.tnic> (raw)
In-Reply-To: <51FFD5B0.9080000@redhat.com>
On Mon, Aug 05, 2013 at 06:41:20PM +0200, Laszlo Ersek wrote:
> I didn't realize the timestamps survive kexec. (As far as I remember
> the kernels I played with kexec on didn't have the automatic
> timestamps yet in dmesg, but I might have messed up just as well...)
No, no, no, kexec is not involved at all.
Here's the whole dmesg up until efi_enter_virtual_map. When we have entered
efi_enter_virtual_mode, the region has changed from
[ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x000000007e0ad000-0x000000007e0cc000) (0MB)
to
[ 0.023004] efi: mem11: type=4, attr=0xf, range=[0x000000007e0ad000-0x000000007e0ad000) (0MB)
And yes, I still need to audit whether the kernel actually does that
change. I'm still looking...
^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H^[[0m^[[35m^[[40m^[[2J^[[01;01H^[[=3h^[[2J^[[01;01H^[[0m^[[37m^[[40m^[[2J^[[01;01Hearly console in decompress_kernel
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.10.0-rc7+ (boris@nazgul) (gcc version 4.7.3 (Debian 4.7.3-4) ) #9 SMP PREEMPT Mon Aug 5 16:27:00 CEST 2013
[ 0.000000] Command line: root=/dev/sda1 debug ignore_loglevel log_buf_len=10M earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e667fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007e668000-0x000000007e691fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007e692000-0x000000007fb11fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fb12000-0x000000007fb69fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007fb6a000-0x000000007fb71fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007fb72000-0x000000007fb75fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fb76000-0x000000007ffdffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by EDK II
[ 0.000000] efi: ACPI=0x7fb71000 ACPI 2.0=0x7fb71014
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000800000) (7MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x0000000000800000-0x0000000001000000) (8MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000001000000-0x0000000002000000) (16MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000002000000-0x00000000036e3000) (22MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x00000000036e3000-0x000000003fffb000) (969MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x000000003fffb000-0x0000000040000000) (0MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000040000000-0x000000007c000000) (960MB)
[ 0.000000] efi: mem09: type=4, attr=0xf, range=[0x000000007c000000-0x000000007c020000) (0MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x000000007c020000-0x000000007e0ad000) (32MB)
[ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x000000007e0ad000-0x000000007e0cc000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x000000007e0cc000-0x000000007e0cd000) (0MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x000000007e0cd000-0x000000007e55d000) (4MB)
[ 0.000000] efi: mem14: type=3, attr=0xf, range=[0x000000007e55d000-0x000000007e59c000) (0MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x000000007e59c000-0x000000007e5a0000) (0MB)
[ 0.000000] efi: mem16: type=3, attr=0xf, range=[0x000000007e5a0000-0x000000007e668000) (0MB)
[ 0.000000] efi: mem17: type=5, attr=0x800000000000000f, range=[0x000000007e668000-0x000000007e67d000) (0MB)
[ 0.000000] efi: mem18: type=6, attr=0x800000000000000f, range=[0x000000007e67d000-0x000000007e692000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x000000007e692000-0x000000007f992000) (19MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000007f992000-0x000000007f994000) (0MB)
[ 0.000000] efi: mem21: type=3, attr=0xf, range=[0x000000007f994000-0x000000007fb12000) (1MB)
[ 0.000000] efi: mem22: type=5, attr=0x800000000000000f, range=[0x000000007fb12000-0x000000007fb42000) (0MB)
[ 0.000000] efi: mem23: type=6, attr=0x800000000000000f, range=[0x000000007fb42000-0x000000007fb66000) (0MB)
[ 0.000000] efi: mem24: type=0, attr=0xf, range=[0x000000007fb66000-0x000000007fb6a000) (0MB)
[ 0.000000] efi: mem25: type=9, attr=0xf, range=[0x000000007fb6a000-0x000000007fb72000) (0MB)
[ 0.000000] efi: mem26: type=10, attr=0xf, range=[0x000000007fb72000-0x000000007fb76000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x000000007fb76000-0x000000007ffe0000) (4MB)
[ 0.000000] efi: mem28: type=6, attr=0x800000000000000f, range=[0x000000007ffe0000-0x0000000080000000) (0MB)
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ffe0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[ 0.000000] efi: efi_reserve_boot_services: start: 0x800000, size: 0x800000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7c000000, size: 0x20000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7e0cd000, size: 0x490000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7e55d000, size: 0x3f000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7e59c000, size: 0x4000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7e5a0000, size: 0xc8000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7e692000, size: 0x1300000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7f994000, size: 0x17e000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7fb76000, size: 0x46a000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x036be000, 0x036befff] PGTABLE
[ 0.000000] BRK [0x036bf000, 0x036bffff] PGTABLE
[ 0.000000] BRK [0x036c0000, 0x036c0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7de00000-0x7dffffff]
[ 0.000000] [mem 0x7de00000-0x7dffffff] page 2M
[ 0.000000] BRK [0x036c1000, 0x036c1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7ddfffff]
[ 0.000000] [mem 0x7c000000-0x7ddfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7e000000-0x7e667fff]
[ 0.000000] [mem 0x7e000000-0x7e5fffff] page 2M
[ 0.000000] [mem 0x7e600000-0x7e667fff] page 4k
[ 0.000000] BRK [0x036c2000, 0x036c2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7e692000-0x7fb11fff]
[ 0.000000] [mem 0x7e692000-0x7e7fffff] page 4k
[ 0.000000] [mem 0x7e800000-0x7f9fffff] page 2M
[ 0.000000] [mem 0x7fa00000-0x7fb11fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7fb76000-0x7ffdffff]
[ 0.000000] [mem 0x7fb76000-0x7fbfffff] page 4k
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] [mem 0x7fe00000-0x7ffdffff] page 4k
[ 0.000000] log_buf_len: 16777216
[ 0.000000] early log buf free: 2089788(99%)
[ 0.000000] ACPI: RSDP 000000007fb71014 00024 (v02 OVMF )
[ 0.000000] ACPI: XSDT 000000007fb700e8 0003C (v01 OVMF OVMFEDK2 20130221 01000013)
[ 0.000000] ACPI: FACP 000000007fb6f000 000F4 (v03 OVMF OVMFEDK2 20130221 OVMF 00000099)
[ 0.000000] ACPI: DSDT 000000007fb6d000 00D57 (v01 INTEL OVMF 00000004 INTL 20100528)
[ 0.000000] ACPI: FACS 000000007fb75000 00040
[ 0.000000] ACPI: APIC 000000007fb6e000 00078 (v01 OVMF OVMFEDK2 20130221 OVMF 00000099)
[ 0.000000] ACPI: SSDT 000000007fb6c000 00057 (v01 REDHAT OVMF 00000001 INTL 20100528)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffdffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ffdffff]
[ 0.000000] NODE_DATA [mem 0x7e0ca000-0x7e0cbfff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007a000000-ffff88007bffffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x7e667fff]
[ 0.000000] node 0: [mem 0x7e692000-0x7fb11fff]
[ 0.000000] node 0: [mem 0x7fb76000-0x7ffdffff]
[ 0.000000] On node 0 totalpages: 524017
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 2070 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8128 pages used for memmap
[ 0.000000] DMA32 zone: 520018 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007e668000 - 000000007e692000
[ 0.000000] PM: Registered nosave memory: 000000007fb12000 - 000000007fb6a000
[ 0.000000] PM: Registered nosave memory: 000000007fb6a000 - 000000007fb72000
[ 0.000000] PM: Registered nosave memory: 000000007fb72000 - 000000007fb76000
[ 0.000000] e820: [mem 0x80000000-0xffffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007ce00000 s84736 r8192 d21760 u2097152
[ 0.000000] pcpu-alloc: s84736 r8192 d21760 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513755
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda1 debug ignore_loglevel log_buf_len=10M earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 1983624k/2097024k available (5838k kernel code, 956k absent, 112444k reserved, 5274k data, 1080k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:4352 nr_irqs:256 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.10.0-rc7+ (boris@nazgul) (gcc version 4.7.3 (Debian 4.7.3-4) ) #9 SMP PREEMPT Mon Aug 5 16:27:00 CEST 2013
[ 0.000000] Command line: root=/dev/sda1 debug ignore_loglevel log_buf_len=10M earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e667fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007e668000-0x000000007e691fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007e692000-0x000000007fb11fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fb12000-0x000000007fb69fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007fb6a000-0x000000007fb71fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007fb72000-0x000000007fb75fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fb76000-0x000000007ffdffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by EDK II
[ 0.000000] efi: ACPI=0x7fb71000 ACPI 2.0=0x7fb71014
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000800000) (7MB)
[ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x0000000000800000-0x0000000001000000) (8MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000001000000-0x0000000002000000) (16MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000002000000-0x00000000036e3000) (22MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x00000000036e3000-0x000000003fffb000) (969MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x000000003fffb000-0x0000000040000000) (0MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000040000000-0x000000007c000000) (960MB)
[ 0.000000] efi: mem09: type=4, attr=0xf, range=[0x000000007c000000-0x000000007c020000) (0MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x000000007c020000-0x000000007e0ad000) (32MB)
[ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x000000007e0ad000-0x000000007e0cc000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x000000007e0cc000-0x000000007e0cd000) (0MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x000000007e0cd000-0x000000007e55d000) (4MB)
[ 0.000000] efi: mem14: type=3, attr=0xf, range=[0x000000007e55d000-0x000000007e59c000) (0MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x000000007e59c000-0x000000007e5a0000) (0MB)
[ 0.000000] efi: mem16: type=3, attr=0xf, range=[0x000000007e5a0000-0x000000007e668000) (0MB)
[ 0.000000] efi: mem17: type=5, attr=0x800000000000000f, range=[0x000000007e668000-0x000000007e67d000) (0MB)
[ 0.000000] efi: mem18: type=6, attr=0x800000000000000f, range=[0x000000007e67d000-0x000000007e692000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x000000007e692000-0x000000007f992000) (19MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000007f992000-0x000000007f994000) (0MB)
[ 0.000000] efi: mem21: type=3, attr=0xf, range=[0x000000007f994000-0x000000007fb12000) (1MB)
[ 0.000000] efi: mem22: type=5, attr=0x800000000000000f, range=[0x000000007fb12000-0x000000007fb42000) (0MB)
[ 0.000000] efi: mem23: type=6, attr=0x800000000000000f, range=[0x000000007fb42000-0x000000007fb66000) (0MB)
[ 0.000000] efi: mem24: type=0, attr=0xf, range=[0x000000007fb66000-0x000000007fb6a000) (0MB)
[ 0.000000] efi: mem25: type=9, attr=0xf, range=[0x000000007fb6a000-0x000000007fb72000) (0MB)
[ 0.000000] efi: mem26: type=10, attr=0xf, range=[0x000000007fb72000-0x000000007fb76000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x000000007fb76000-0x000000007ffe0000) (4MB)
[ 0.000000] efi: mem28: type=6, attr=0x800000000000000f, range=[0x000000007ffe0000-0x0000000080000000) (0MB)
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ffe0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
[ 0.000000] efi: efi_reserve_boot_services: start: 0x800000, size: 0x800000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7c000000, size: 0x20000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7e0cd000, size: 0x490000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7e55d000, size: 0x3f000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7e59c000, size: 0x4000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7e5a0000, size: 0xc8000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7e692000, size: 0x1300000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7f994000, size: 0x17e000
[ 0.000000] efi: efi_reserve_boot_services: start: 0x7fb76000, size: 0x46a000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x036be000, 0x036befff] PGTABLE
[ 0.000000] BRK [0x036bf000, 0x036bffff] PGTABLE
[ 0.000000] BRK [0x036c0000, 0x036c0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7de00000-0x7dffffff]
[ 0.000000] [mem 0x7de00000-0x7dffffff] page 2M
[ 0.000000] BRK [0x036c1000, 0x036c1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7ddfffff]
[ 0.000000] [mem 0x7c000000-0x7ddfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7e000000-0x7e667fff]
[ 0.000000] [mem 0x7e000000-0x7e5fffff] page 2M
[ 0.000000] [mem 0x7e600000-0x7e667fff] page 4k
[ 0.000000] BRK [0x036c2000, 0x036c2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7e692000-0x7fb11fff]
[ 0.000000] [mem 0x7e692000-0x7e7fffff] page 4k
[ 0.000000] [mem 0x7e800000-0x7f9fffff] page 2M
[ 0.000000] [mem 0x7fa00000-0x7fb11fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7fb76000-0x7ffdffff]
[ 0.000000] [mem 0x7fb76000-0x7fbfffff] page 4k
[ 0.000000] [mem 0x7fc00000-0x7fdfffff] page 2M
[ 0.000000] [mem 0x7fe00000-0x7ffdffff] page 4k
[ 0.000000] log_buf_len: 16777216
[ 0.000000] early log buf free: 2089788(99%)
[ 0.000000] ACPI: RSDP 000000007fb71014 00024 (v02 OVMF )
[ 0.000000] ACPI: XSDT 000000007fb700e8 0003C (v01 OVMF OVMFEDK2 20130221 01000013)
[ 0.000000] ACPI: FACP 000000007fb6f000 000F4 (v03 OVMF OVMFEDK2 20130221 OVMF 00000099)
[ 0.000000] ACPI: DSDT 000000007fb6d000 00D57 (v01 INTEL OVMF 00000004 INTL 20100528)
[ 0.000000] ACPI: FACS 000000007fb75000 00040
[ 0.000000] ACPI: APIC 000000007fb6e000 00078 (v01 OVMF OVMFEDK2 20130221 OVMF 00000099)
[ 0.000000] ACPI: SSDT 000000007fb6c000 00057 (v01 REDHAT OVMF 00000001 INTL 20100528)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffdffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ffdffff]
[ 0.000000] NODE_DATA [mem 0x7e0ca000-0x7e0cbfff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007a000000-ffff88007bffffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x7e667fff]
[ 0.000000] node 0: [mem 0x7e692000-0x7fb11fff]
[ 0.000000] node 0: [mem 0x7fb76000-0x7ffdffff]
[ 0.000000] On node 0 totalpages: 524017
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 2070 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8128 pages used for memmap
[ 0.000000] DMA32 zone: 520018 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007e668000 - 000000007e692000
[ 0.000000] PM: Registered nosave memory: 000000007fb12000 - 000000007fb6a000
[ 0.000000] PM: Registered nosave memory: 000000007fb6a000 - 000000007fb72000
[ 0.000000] PM: Registered nosave memory: 000000007fb72000 - 000000007fb76000
[ 0.000000] e820: [mem 0x80000000-0xffffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007ce00000 s84736 r8192 d21760 u2097152
[ 0.000000] pcpu-alloc: s84736 r8192 d21760 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513755
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda1 debug ignore_loglevel log_buf_len=10M earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 1983624k/2097024k available (5838k kernel code, 956k absent, 112444k reserved, 5274k data, 1080k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:4352 nr_irqs:256 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5855 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2893.477 MHz processor
[ 0.004001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.95 BogoMIPS (lpj=2893477)
[ 0.006004] pid_max: default: 32768 minimum: 301
[ 0.006776] efi: efi_enter_virtual_mode: enter
[ 0.007004] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000009f000) (0MB)
[ 0.009004] efi: mem01: type=2, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.010004] efi: mem02: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000800000) (7MB)
[ 0.011004] efi: mem03: type=4, attr=0xf, range=[0x0000000000800000-0x0000000001000000) (8MB)
[ 0.013004] efi: mem04: type=7, attr=0xf, range=[0x0000000001000000-0x0000000002000000) (16MB)
[ 0.014004] efi: mem05: type=2, attr=0xf, range=[0x0000000002000000-0x00000000036e3000) (22MB)
[ 0.016004] efi: mem06: type=7, attr=0xf, range=[0x00000000036e3000-0x000000003fffb000) (969MB)
[ 0.017004] efi: mem07: type=2, attr=0xf, range=[0x000000003fffb000-0x0000000040000000) (0MB)
[ 0.019004] efi: mem08: type=7, attr=0xf, range=[0x0000000040000000-0x000000007c000000) (960MB)
[ 0.020004] efi: mem09: type=4, attr=0xf, range=[0x000000007c000000-0x000000007c020000) (0MB)
[ 0.021004] efi: mem10: type=7, attr=0xf, range=[0x000000007c020000-0x000000007e0ad000) (32MB)
[ 0.023004] efi: mem11: type=4, attr=0xf, range=[0x000000007e0ad000-0x000000007e0ad000) (0MB)
[ 0.024004] efi: mem12: type=7, attr=0xf, range=[0x000000007e0cc000-0x000000007e0cd000) (0MB)
[ 0.026004] efi: mem13: type=4, attr=0xf, range=[0x000000007e0cd000-0x000000007e55d000) (4MB)
[ 0.027004] efi: mem14: type=3, attr=0xf, range=[0x000000007e55d000-0x000000007e59c000) (0MB)
[ 0.028004] efi: mem15: type=4, attr=0xf, range=[0x000000007e59c000-0x000000007e5a0000) (0MB)
[ 0.030004] efi: mem16: type=3, attr=0xf, range=[0x000000007e5a0000-0x000000007e668000) (0MB)
[ 0.031004] efi: mem17: type=5, attr=0x800000000000000f, range=[0x000000007e668000-0x000000007e67d000) (0MB)
[ 0.033004] efi: mem18: type=6, attr=0x800000000000000f, range=[0x000000007e67d000-0x000000007e692000) (0MB)
[ 0.035004] efi: mem19: type=4, attr=0xf, range=[0x000000007e692000-0x000000007f992000) (19MB)
[ 0.036004] efi: mem20: type=7, attr=0xf, range=[0x000000007f992000-0x000000007f994000) (0MB)
[ 0.037004] efi: mem21: type=3, attr=0xf, range=[0x000000007f994000-0x000000007fb12000) (1MB)
[ 0.039004] efi: mem22: type=5, attr=0x800000000000000f, range=[0x000000007fb12000-0x000000007fb42000) (0MB)
[ 0.040004] efi: mem23: type=6, attr=0x800000000000000f, range=[0x000000007fb42000-0x000000007fb66000) (0MB)
[ 0.042004] efi: mem24: type=0, attr=0xf, range=[0x000000007fb66000-0x000000007fb6a000) (0MB)
[ 0.043004] efi: mem25: type=9, attr=0xf, range=[0x000000007fb6a000-0x000000007fb72000) (0MB)
[ 0.045004] efi: mem26: type=10, attr=0xf, range=[0x000000007fb72000-0x000000007fb76000) (0MB)
[ 0.046004] efi: mem27: type=4, attr=0xf, range=[0x000000007fb76000-0x000000007ffe0000) (4MB)
[ 0.048004] efi: mem28: type=6, attr=0x800000000000000f, range=[0x000000007ffe0000-0x0000000080000000) (0MB)
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
next prev parent reply other threads:[~2013-08-05 16:47 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-31 20:54 Borislav Petkov
2013-07-31 20:58 ` Matthew Garrett
2013-07-31 21:51 ` Borislav Petkov
2013-07-31 21:54 ` Matthew Garrett
2013-08-01 16:51 ` Borislav Petkov
2013-07-31 21:55 ` David Woodhouse
2013-08-01 16:49 ` Borislav Petkov
2013-08-05 11:27 ` [edk2] " Laszlo Ersek
2013-08-05 13:02 ` Borislav Petkov
2013-08-05 13:39 ` Laszlo Ersek
2013-08-05 14:03 ` Borislav Petkov
2013-08-05 14:27 ` Laszlo Ersek
2013-08-05 14:40 ` Borislav Petkov
2013-08-05 15:15 ` Laszlo Ersek
2013-08-05 15:34 ` James Bottomley
2013-08-05 16:27 ` Laszlo Ersek
2013-08-05 16:12 ` Borislav Petkov
2013-08-05 16:41 ` Laszlo Ersek
2013-08-05 16:47 ` Borislav Petkov [this message]
2013-08-05 17:00 ` Kinney, Michael D
2013-08-05 17:09 ` Laszlo Ersek
2013-08-05 21:26 ` Laszlo Ersek
2013-08-05 22:08 ` Borislav Petkov
2013-08-06 14:10 ` Borislav Petkov
2013-08-06 15:31 ` Laszlo Ersek
2013-08-07 15:19 ` Borislav Petkov
2013-08-07 17:23 ` Andrew Fish
2013-08-07 20:19 ` Matt Fleming
2013-08-07 20:24 ` Matt Fleming
2013-08-07 21:10 ` Andrew Fish
2013-08-07 21:23 ` Matthew Garrett
2013-08-08 10:17 ` Matt Fleming
2013-08-08 13:46 ` Andrew Fish
2013-09-02 8:19 ` Matt Fleming
2013-09-13 20:38 ` jerry.hoemann
2013-09-16 10:59 ` Matt Fleming
2013-09-16 11:50 ` Laszlo Ersek
2013-09-16 15:57 ` Josh Triplett
2013-09-16 16:25 ` Laszlo Ersek
2013-09-16 16:27 ` Matthew Garrett
2013-09-16 16:29 ` Josh Triplett
2013-09-18 19:24 ` jerry.hoemann
2013-09-20 9:06 ` Matt Fleming
2013-08-07 17:49 ` Laszlo Ersek
2013-08-08 15:02 ` Borislav Petkov
2013-08-08 21:45 ` Brian J. Johnson
2013-08-18 7:33 ` Jordan Justen
2013-08-05 15:50 ` Andrew Fish
2013-08-05 18:12 ` Borislav Petkov
2013-08-05 21:37 ` H. Peter Anvin
2013-08-05 21:41 ` Borislav Petkov
2013-08-05 21:49 ` H. Peter Anvin
2013-08-05 21:55 ` Laszlo Ersek
2013-08-05 22:52 ` James Bottomley
2013-08-06 7:26 ` Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130805164731.GG31845@pd.tnic \
--to=bp@alien8.de \
--cc=dwmw2@infradead.org \
--cc=edk2-devel@lists.sourceforge.net \
--cc=gleb@redhat.com \
--cc=lersek@redhat.com \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mjg59@srcf.ucam.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®