mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Heidelberg via B4 Relay <devnull+david.ixit.cz@kernel.org>
To: Srinivas Kandagatla <srini@kernel.org>,
	 Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	 Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	 David Rhodes <david.rhodes@cirrus.com>,
	 Richard Fitzgerald <rf@opensource.cirrus.com>,
	 Bjorn Andersson <andersson@kernel.org>,
	 Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 David Rhodes <drhodes@opensource.cirrus.com>,
	 Conor Dooley <conor+dt@kernel.org>
Cc: linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	 linux-kernel@vger.kernel.org, patches@opensource.cirrus.com,
	 devicetree@vger.kernel.org, phone-devel@vger.kernel.org,
	 David Heidelberg <david@ixit.cz>
Subject: [PATCH RFC v2 1/6] ASoC: qcom: sdm845: Demystify TDM masks a bit
Date: Thu, 03 Sep 2026 20:26:37 +0200	[thread overview]
Message-ID: <20260903-pixel3-audio-v2-1-7c22ed915291@ixit.cz> (raw)
In-Reply-To: <20260903-pixel3-audio-v2-0-7c22ed915291@ixit.cz>

From: David Heidelberg <david@ixit.cz>

Describe the mask with the bits used for each RX/TX.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 sound/soc/qcom/sdm845.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c
index 6843ab8ba017e..0ce8265ab1c1f 100644
--- a/sound/soc/qcom/sdm845.c
+++ b/sound/soc/qcom/sdm845.c
@@ -18,19 +18,24 @@
 #include "sdw.h"
 #include "../codecs/rt5663.h"
 
 #define DRIVER_NAME	"sdm845"
 #define DEFAULT_SAMPLE_RATE_48K		48000
 #define DEFAULT_MCLK_RATE		24576000
 #define TDM_BCLK_RATE		6144000
 #define MI2S_BCLK_RATE		1536000
-#define LEFT_SPK_TDM_TX_MASK    0x30
-#define RIGHT_SPK_TDM_TX_MASK   0xC0
-#define SPK_TDM_RX_MASK         0x03
+#define LEFT_SPK_TDM_RX_MASK	BIT(0)
+#define RIGHT_SPK_TDM_RX_MASK	BIT(1)
+#define SPK_TDM_RX_MASK		(LEFT_SPK_TDM_RX_MASK | RIGHT_SPK_TDM_RX_MASK)
+#define MIC1_TDM_RX_MASK	BIT(2)
+#define MIC2_TDM_RX_MASK	BIT(3)
+#define MIC_TDM_RX_MASK		(MIC1_TDM_RX_MASK | MIC2_TDM_RX_MASK)
+#define LEFT_SPK_TDM_TX_MASK	(BIT(4) | BIT(5))
+#define RIGHT_SPK_TDM_TX_MASK	(BIT(6) | BIT(7))
 #define NUM_TDM_SLOTS           8
 #define SLIM_MAX_TX_PORTS 16
 #define SLIM_MAX_RX_PORTS 13
 #define WCD934X_DEFAULT_MCLK_RATE	9600000
 
 struct sdm845_snd_data {
 	struct snd_soc_jack jack;
 	bool jack_setup;
@@ -107,34 +112,36 @@ static int sdm845_tdm_snd_hw_params(struct snd_pcm_substream *substream,
 	default:
 		dev_err(rtd->dev, "%s: invalid param format 0x%x\n",
 				__func__, params_format(params));
 		return -EINVAL;
 	}
 
 	channels = params_channels(params);
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0, 0x3,
-				8, slot_width);
+		ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0, SPK_TDM_RX_MASK,
+					       NUM_TDM_SLOTS, slot_width);
 		if (ret < 0) {
 			dev_err(rtd->dev, "%s: failed to set tdm slot, err:%d\n",
 					__func__, ret);
 			goto end;
 		}
 
 		ret = snd_soc_dai_set_channel_map(cpu_dai, 0, NULL,
 				channels, tdm_slot_offset);
 		if (ret < 0) {
 			dev_err(rtd->dev, "%s: failed to set channel map, err:%d\n",
 					__func__, ret);
 			goto end;
 		}
 	} else {
-		ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0xf, 0,
-				8, slot_width);
+		ret = snd_soc_dai_set_tdm_slot(cpu_dai,
+					       SPK_TDM_RX_MASK |
+					       MIC_TDM_RX_MASK, 0,
+					       NUM_TDM_SLOTS, slot_width);
 		if (ret < 0) {
 			dev_err(rtd->dev, "%s: failed to set tdm slot, err:%d\n",
 					__func__, ret);
 			goto end;
 		}
 
 		ret = snd_soc_dai_set_channel_map(cpu_dai, channels,
 				tdm_slot_offset, 0, NULL);

-- 
2.55.0



  reply	other threads:[~2026-09-03 18:26 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-03 18:26 [PATCH RFC v2 0/6] Speakers for Pixel 3 / 3 XL David Heidelberg via B4 Relay
2026-09-03 18:26 ` David Heidelberg via B4 Relay [this message]
2026-09-03 18:26 ` [PATCH RFC v2 2/6] ASoC: qcom: sdm845: use DSP_A format for TDM codec DAIs David Heidelberg via B4 Relay
2026-09-03 18:26 ` [PATCH RFC v2 3/6] ASoC: qcom: sdm845: Use per-speaker RX masks for TDM slot assignment David Heidelberg via B4 Relay
2026-09-03 18:26 ` [PATCH RFC v2 4/6] ASoC: qcom: sdm845: Set codec dai and component sysclk during startup David Heidelberg via B4 Relay
2026-09-03 18:26 ` [PATCH RFC v2 5/6] ASoC: cs35l36: Implement set_tdm_slot to program RX and TX slots David Heidelberg via B4 Relay
2026-09-04  8:22   ` Konrad Dybcio
2026-09-04  9:26     ` Charles Keepax
2026-09-04  9:23   ` Charles Keepax
2026-09-03 18:26 ` [PATCH RFC v2 6/6] arm64: dts: qcom: sdm845-google: Add basic audio support David Heidelberg via B4 Relay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260903-pixel3-audio-v2-1-7c22ed915291@ixit.cz \
    --to=devnull+david.ixit.cz@kernel.org \
    --cc=andersson@kernel.org \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=david.rhodes@cirrus.com \
    --cc=david@ixit.cz \
    --cc=devicetree@vger.kernel.org \
    --cc=drhodes@opensource.cirrus.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=phone-devel@vger.kernel.org \
    --cc=rf@opensource.cirrus.com \
    --cc=robh@kernel.org \
    --cc=srini@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®