From: Ronald Claveau via B4 Relay <devnull+linux-kernel-dev.aliel.fr@kernel.org>
To: "Uwe Kleine-König" <ukleinek@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Kevin Hilman" <khilman@baylibre.com>,
"Jerome Brunet" <jbrunet@baylibre.com>,
"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>
Cc: linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org,
Ronald Claveau <linux-kernel-dev@aliel.fr>
Subject: [PATCH 0/3] Add T7 PWM core clock support
Date: Thu, 24 Sep 2026 17:14:27 +0200 [thread overview]
Message-ID: <20260924-add-t7-sys-pwm-clk-v1-0-05b91e87f0a9@aliel.fr> (raw)
The PWM controllers on the Amlogic T7 SoC have a system clock that
controls access to the controller, in addition to the two input
clocks of channels A and B.
It is currently not described in the device tree, so it is neither
referenced nor enabled by the driver.
This series adds support for it:
- patch 1 extends the binding with a third "core" clock for
amlogic,t7-pwm, and makes clocks/clock-names required for it;
- patch 2 makes the driver get and enable the optional "core"
clock, leaving other SoCs unaffected;
- patch 3 describes the system clock (CLKID_SYS_PWM_*) in the T7
device tree for all the PWM controllers.
`dt_binding_check DT_SCHEMA_FILES=pwm-amlogic.yaml` test is ok
CHKDT ./Documentation/devicetree/bindings
warning: python package 'yamllint' not installed, skipping
STYLE ./Documentation/devicetree/bindings
DTEX Documentation/devicetree/bindings/pwm/pwm-amlogic.example.dts
DTC [C] Documentation/devicetree/bindings/pwm/pwm-amlogic.example.dtb
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
---
Ronald Claveau (3):
dt-bindings: pwm: amlogic: Add core clock for T7
pwm: meson: Add optional core clock for S4 PWM
arm64: dts: amlogic: t7: Add core clock to PWM controller nodes
.../devicetree/bindings/pwm/pwm-amlogic.yaml | 37 +++++++++++++++++++---
arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 28 ++++++++++++----
drivers/pwm/pwm-meson.c | 5 +++
3 files changed, 59 insertions(+), 11 deletions(-)
---
base-commit: a8c591ed6b672915e0be57843f943a2a723aff40
change-id: 20260924-add-t7-sys-pwm-clk-f0eff81bee21
Best regards,
--
Ronald Claveau <linux-kernel-dev@aliel.fr>
next reply other threads:[~2026-09-24 15:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-24 15:14 Ronald Claveau via B4 Relay [this message]
2026-09-24 15:14 ` [PATCH 1/3] dt-bindings: pwm: amlogic: Add core clock for T7 Ronald Claveau via B4 Relay
2026-09-24 16:35 ` Conor Dooley
2026-09-25 14:32 ` linux-kernel-dev
2026-09-24 15:14 ` [PATCH 2/3] pwm: meson: Add optional core clock for S4 PWM Ronald Claveau via B4 Relay
2026-09-24 15:14 ` [PATCH 3/3] arm64: dts: amlogic: t7: Add core clock to PWM controller nodes Ronald Claveau via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260924-add-t7-sys-pwm-clk-v1-0-05b91e87f0a9@aliel.fr \
--to=devnull+linux-kernel-dev.aliel.fr@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hkallweit1@gmail.com \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel-dev@aliel.fr \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=ukleinek@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®