From: Ivan Vecera <ivecera@redhat.com>
To: netdev@vger.kernel.org
Cc: Min Li <min.li@microchip.com>,
Vadim Fedorenko <vadim.fedorenko@linux.dev>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>,
Jiri Pirko <jiri@resnulli.us>, Jakub Kicinski <kuba@kernel.org>,
Prathosh Satish <Prathosh.Satish@microchip.com>,
Paolo Abeni <pabeni@redhat.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH net v3 1/4] dpll: zl3073x: reject output frequencies with too small divisor
Date: Tue, 6 Oct 2026 17:31:13 +0200 [thread overview]
Message-ID: <20261006153116.347497-2-ivecera@redhat.com> (raw)
In-Reply-To: <20261006153116.347497-1-ivecera@redhat.com>
The output divider has to be at least 2. In N-pin divide mode the
per-output divider must be 2 or more and the N-pin is divided once more
(also by 2 or more), so the N-pin needs an effective divisor of at least
4.
zl3073x_pin_check_freq() only checked that an output frequency divides the
synth frequency, so it accepted frequencies that would require a smaller
divisor. Reject them: require a divisor of at least 2 for normal outputs
and the P-pin of N-divided outputs, and 4 for the N-pin. Also reject a
zero frequency, which would otherwise divide by zero.
Fixes: a99a9f0ebdaa ("dpll: zl3073x: Read DPLL types and pin properties from system firmware")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
drivers/dpll/zl3073x/prop.c | 29 ++++++++++++++++++++++-------
1 file changed, 22 insertions(+), 7 deletions(-)
diff --git a/drivers/dpll/zl3073x/prop.c b/drivers/dpll/zl3073x/prop.c
index ac9d41d0f978..a4bdc3878590 100644
--- a/drivers/dpll/zl3073x/prop.c
+++ b/drivers/dpll/zl3073x/prop.c
@@ -22,7 +22,8 @@
* The function checks the given frequency is valid for the device. For input
* pins it checks that the frequency can be factorized using supported base
* frequencies. For output pins it checks that the frequency divides connected
- * synth frequency without remainder.
+ * synth frequency without remainder and that the resulting divisor is within
+ * the range supported by the hardware.
*
* Return: true if the frequency is valid, false if not.
*/
@@ -30,7 +31,7 @@ static bool
zl3073x_pin_check_freq(struct zl3073x_dev *zldev, enum dpll_pin_direction dir,
u8 id, u64 freq)
{
- if (freq > U32_MAX)
+ if (!freq || freq > U32_MAX)
goto err_inv_freq;
if (dir == DPLL_PIN_DIRECTION_INPUT) {
@@ -41,18 +42,32 @@ zl3073x_pin_check_freq(struct zl3073x_dev *zldev, enum dpll_pin_direction dir,
if (rc)
goto err_inv_freq;
} else {
- u32 synth_freq;
- u8 out, synth;
+ const struct zl3073x_out *out;
+ u32 synth_freq, div, min_div, rem;
+ u8 out_id, synth;
/* Get output pin synthesizer */
- out = zl3073x_output_pin_out_get(id);
- synth = zl3073x_dev_out_synth_get(zldev, out);
+ out_id = zl3073x_output_pin_out_get(id);
+ synth = zl3073x_dev_out_synth_get(zldev, out_id);
/* Get synth frequency */
synth_freq = zl3073x_dev_synth_freq_get(zldev, synth);
/* Check the frequency divides synth frequency */
- if (synth_freq % (u32)freq)
+ div = div_u64_rem(synth_freq, freq, &rem);
+ if (rem)
+ goto err_inv_freq;
+
+ /* The output divisor has to be at least 2. For the N-pin of an
+ * N-divided output the effective divisor also includes the N
+ * divider (>= 2), so the minimum is 4.
+ */
+ out = zl3073x_out_state_get(zldev, out_id);
+ if (zl3073x_out_is_ndiv(out) && zl3073x_is_n_pin(id))
+ min_div = 4;
+ else
+ min_div = 2;
+ if (div < min_div)
goto err_inv_freq;
}
--
2.55.0
next prev parent reply other threads:[~2026-10-06 15:31 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-06 15:31 [PATCH net v3 0/4] dpll: zl3073x: fix output pin frequency, esync and sibling notifications Ivan Vecera
2026-10-06 15:31 ` Ivan Vecera [this message]
2026-10-06 15:31 ` [PATCH net v3 2/4] dpll: zl3073x: make embedded sync follow the output carrier frequency Ivan Vecera
2026-10-06 15:31 ` [PATCH net v3 3/4] dpll: zl3073x: reject inexact frequencies for N-divided outputs Ivan Vecera
2026-10-06 15:31 ` [PATCH net v3 4/4] dpll: zl3073x: notify sibling pin when shared output config changes Ivan Vecera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261006153116.347497-2-ivecera@redhat.com \
--to=ivecera@redhat.com \
--cc=Prathosh.Satish@microchip.com \
--cc=arkadiusz.kubalewski@intel.com \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=min.li@microchip.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®