From: Rich Felker <dalias@libc.org>
To: linux-kernel@vger.kernel.org, linux-sh@vger.kernel.org
Cc: Rich Felker <dalias@libc.org>,
Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH v2 11/12] sh: add defconfig for J-Core J2
Date: Fri, 20 May 2016 02:53:04 +0000 [thread overview]
Message-ID: <2f8d611513547a69e42048e35f6cc4b46440c6a4.1463708766.git.dalias@libc.org> (raw)
In-Reply-To: <cover.1463708766.git.dalias@libc.org>
This defconfig is intended not to be specific to a particular board;
it enables drivers for all currently-supported hardware, and should be
updated to include additional drivers as they are added.
Signed-off-by: Rich Felker <dalias@libc.org>
---
arch/sh/configs/j2_defconfig | 38 ++++++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 arch/sh/configs/j2_defconfig
diff --git a/arch/sh/configs/j2_defconfig b/arch/sh/configs/j2_defconfig
new file mode 100644
index 0000000..fca167f
--- /dev/null
+++ b/arch/sh/configs/j2_defconfig
@@ -0,0 +1,38 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_SUBTYPE_J2=y
+CONFIG_MEMORY_START=0x10000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_DEVICE_TREE=y
+CONFIG_HZ_100=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttyUL0 earlycon"
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_SPI=y
+CONFIG_SPI_JCORE=y
+CONFIG_WATCHDOG=y
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+CONFIG_CLKSRC_JCORE_PIT=y
+CONFIG_JCORE_AIC=y
+CONFIG_EXT4_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_FAT_DEFAULT_UTF8=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_UTF8=y
--
2.8.1
next prev parent reply other threads:[~2016-05-20 2:53 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-20 2:53 [PATCH v2 00/12] J-core J2 cpu and SoC peripherals support Rich Felker
2016-05-20 2:53 ` [PATCH v2 01/12] of: add vendor prefix for J-Core Rich Felker
2016-05-23 20:49 ` Rob Herring
2016-05-20 2:53 ` [PATCH v2 02/12] of: add J-Core cpu bindings Rich Felker
2016-05-23 20:48 ` Rob Herring
2016-05-23 21:03 ` Rich Felker
2016-05-23 23:29 ` Rob Herring
2016-05-24 2:39 ` Rich Felker
2016-05-24 21:30 ` Rob Landley
2016-05-25 1:13 ` Rob Herring
2016-05-25 2:33 ` Rich Felker
2016-05-25 13:13 ` Rob Herring
2016-05-20 2:53 ` [PATCH v2 03/12] of: add J-Core interrupt controller bindings Rich Felker
2016-05-20 8:04 ` Geert Uytterhoeven
2016-05-20 22:34 ` Rich Felker
2016-05-21 18:07 ` Geert Uytterhoeven
2016-05-21 19:17 ` Rich Felker
2016-05-23 20:53 ` Rob Herring
2016-05-23 21:13 ` Rich Felker
2016-05-24 8:09 ` Marc Zyngier
2016-05-25 2:25 ` Rich Felker
2016-05-20 2:53 ` [PATCH v2 12/12] sh: add device tree source for J2 FPGA on Mimas v2 board Rich Felker
2016-05-20 8:17 ` Geert Uytterhoeven
2016-05-20 22:42 ` Rich Felker
2016-05-20 2:53 ` [PATCH v2 06/12] sh: add support for J-Core J2 processor Rich Felker
2016-05-20 2:53 ` [PATCH v2 10/12] spi: add driver for J-Core SPI controller Rich Felker
2016-05-20 8:15 ` Geert Uytterhoeven
2016-05-20 22:50 ` Rich Felker
2016-05-20 10:23 ` Mark Brown
2016-05-20 23:24 ` Rich Felker
2016-05-23 15:30 ` Mark Brown
2016-05-23 20:29 ` Rich Felker
2016-05-23 22:11 ` Mark Brown
2016-05-20 2:53 ` Rich Felker [this message]
2016-05-20 2:53 ` [PATCH v2 09/12] clocksource: add J-Core PIT/RTC driver Rich Felker
2016-05-20 14:01 ` Daniel Lezcano
2016-05-21 3:15 ` Rich Felker
2016-05-21 15:55 ` Rob Landley
2016-05-23 20:32 ` Daniel Lezcano
2016-05-24 2:25 ` Rich Felker
2016-05-20 2:53 ` [PATCH v2 05/12] of: add J-Core SPI master bindings Rich Felker
2016-05-20 8:05 ` Geert Uytterhoeven
2016-05-23 21:00 ` Rob Herring
2016-05-23 21:06 ` Rich Felker
2016-05-23 23:16 ` Rob Herring
2016-05-20 2:53 ` [PATCH v2 08/12] irqchip: add J-Core AIC driver Rich Felker
2016-05-20 8:08 ` Geert Uytterhoeven
2016-05-20 8:15 ` Marc Zyngier
2016-05-25 4:29 ` Rich Felker
2016-05-20 2:53 ` [PATCH v2 07/12] sh: add AT_HWCAP flag for J-Core cas.l instruction Rich Felker
2016-05-20 2:53 ` [PATCH v2 04/12] of: add J-Core timer bindings Rich Felker
2016-05-20 8:03 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2f8d611513547a69e42048e35f6cc4b46440c6a4.1463708766.git.dalias@libc.org \
--to=dalias@libc.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®