[PATCH v2 1/2] Add Documentation for Media Device, Video Device, and Synopsys DW MIPI CSI-2 Host

[Ramiro Oliveira <Ramiro.Oliveira@synopsys.com>]

Create device tree bindings documentation for Media and Video Device, as well
as the DW MIPI CSI-2 Host.

Signed-off-by: Ramiro Oliveira <roliveir@synopsys.com>
---
 .../devicetree/bindings/media/snps,dw-mipi-csi.txt |  37 ++++++++
 .../devicetree/bindings/media/snps,plat-ipk.txt    | 105 +++++++++++++++++++++
 2 files changed, 142 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/snps,dw-mipi-csi.txt
 create mode 100644 Documentation/devicetree/bindings/media/snps,plat-ipk.txt

diff --git a/Documentation/devicetree/bindings/media/snps,dw-mipi-csi.txt b/Documentation/devicetree/bindings/media/snps,dw-mipi-csi.txt
new file mode 100644
index 0000000..1caa652
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/snps,dw-mipi-csi.txt
@@ -0,0 +1,37 @@
+Synopsys DesignWare CSI-2 Host controller
+
+Description
+-----------
+
+This HW block is used to receive image coming from an MIPI CSI-2 compatible
+camera.
+
+Required properties:
+- compatible: shall be "snps,dw-mipi-csi"
+- reg		: physical base address and size of the device memory mapped
+  registers;
+- interrupts	: CSI-2 Host interrupt
+- data-lanes    : Number of lanes to be used
+- output-type   : Core output to be used (IPI-> 0 or IDI->1 or BOTH->2) These
+  values choose which of the Core outputs will be used, it can be Image Data
+  Interface or Image Pixel Interface.
+- phys, phy-names: List of one PHY specifier and identifier string (as defined
+  in Documentation/devicetree/bindings/phy/phy-bindings.txt). This PHY is a MIPI
+  DPHY working in RX mode.
+
+Optional properties(if in IPI mode):
+- ipi-mode 	: Mode to be used when in IPI(Camera -> 0 or Automatic -> 1)
+  This property defines if the controller will use the video timings available
+  in the video stream or if it will use pre-defined ones.
+- ipi-color-mode: Bus depth to be used in IPI (48 bits -> 0 or 16 bits -> 1)
+  This property defines the width of the IPI bus.
+- ipi-auto-flush: Data auto-flush (1 -> Yes or 0 -> No). This property defines
+  if the data is automatically flushed in each vsync or if this process is done
+  manually
+- virtual-channel: Virtual channel where data is present when in IPI mode. This
+  property chooses the virtual channel which IPI will use to retrieve the video
+  stream.
+
+The per-board settings:
+ - port sub-node describing a single endpoint connected to the dw-mipi-csi
+   as described in video-interfaces.txt[1].
diff --git a/Documentation/devicetree/bindings/media/snps,plat-ipk.txt b/Documentation/devicetree/bindings/media/snps,plat-ipk.txt
new file mode 100644
index 0000000..50e9279
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/snps,plat-ipk.txt
@@ -0,0 +1,105 @@
+Synopsys DesignWare CSI-2 Host IPK Media Device
+
+The Synopsys DesignWare CSI-2 Host IPK subsystem comprises of multiple
+sub-devices represented by separate device tree nodes. Currently this includes:
+plat-ipk, video-device, and dw-mipi-csi.
+
+The sub-subdevices are defined as child nodes of the common 'camera' node which
+also includes common properties of the whole subsystem not really specific to
+any single sub-device.
+
+Common 'camera' node
+--------------------
+
+Required properties:
+
+- compatible: must be "snps,plat-ipk", "simple-bus"
+
+The 'camera' node must include at least one 'video-device' and one 'dw-mipi-csi'
+child node.
+
+'video-device' device nodes
+-------------------
+
+Required properties:
+
+- compatible: "snps,video-device"
+- dmas, dma-names: List of one DMA specifier and identifier string (as defined
+  in Documentation/devicetree/bindings/dma/dma.txt) per port. Each port
+  requires a DMA channel with the identifier string set to "port" followed by
+  the port index.
+
+Image sensor nodes
+------------------
+
+The sensor device nodes should be added to their control bus controller (e.g.
+I2C0) nodes and linked to a port node in the dw-mipi-csi,using the common video
+interfaces bindings, defined in video-interfaces.txt.
+
+Example:
+
+	i2c@0x02000 {
+			compatible = "snps,designware-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02000 0x100>;
+			clock-frequency = <400000>;
+			clocks = <&i2cclk>;
+			interrupts =<0>;
+			ov: camera@0x36 {
+				compatible = "ovti,ov5647";
+				reg = <0x36>;
+				port {
+					camera_1: endpoint {
+						remote-endpoint = <&csi1_ep1>;
+						clock-lanes = <0>;
+						data-lanes = <1 2 >;
+					};
+				};
+			};
+		};
+
+
+	camera {
+		compatible = "snps,plat-ipk", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+			video_device: video-device@0x10000 {
+				compatible = "snps,video-device";
+				dmas = <&axi_vdma_0 0>;
+				dma-names = "vdma0";
+			};
+
+
+			csi2_1: csi2@0x03000 {
+				compatible = "snps,dw-mipi-csi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = < 0x03000 0x7FF>;
+				interrupts = <2>;
+				data-lanes = <2>;
+				output-type = <2>;
+
+				phys = <&mipi_phy_ctrl1 0>;
+				phy-names = "csi2-dphy";
+
+				/*IPI Related Configurations*/
+				ipi-mode = <0>;
+				ipi-color-mode = <0>;
+				ipi-auto-flush = <1>;
+				virtual-channel = <0>;
+
+				/* Camera MIPI CSI-2 (CSI1) */
+				port@1 {
+					reg = <1>;
+					csi1_ep1: endpoint {
+						remote-endpoint = <&camera_1>;
+						data-lanes = <1 2>;
+						};
+				};
+			};
+		};
+	};
+
+The dw-mipi-csi device binding is defined in snps,dw-mipi-csi.txt.
-- 
2.10.2