mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Vineet Gupta <Vineet.Gupta1@synopsys.com>
To: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Noam Camus <noamca@mellanox.com>, <Alexey.Brodkin@synopsys.com>,
	<linux-kernel@vger.kernel.org>, <tglx@linutronix.de>,
	<linux-snps-arc@lists.infradead.org>
Subject: Re: [PATCH v3 07/10] ARC: breakout aux handling into a separate header
Date: Fri, 4 Nov 2016 10:35:28 -0700	[thread overview]
Message-ID: <5593de35-170a-68a0-6922-42bc60c8f18f@synopsys.com> (raw)
In-Reply-To: <1478216015-18931-8-git-send-email-vgupta@synopsys.com>

On 11/03/2016 04:33 PM, Vineet Gupta wrote:
> ARC timers use aux registers for programming and this paves way for
> moving ARC timer drivers into drivers/clocksource
> 
> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
> ---
>  arch/arc/include/asm/arcregs.h | 85 +-----------------------------------------
>  arch/arc/include/asm/mcip.h    |  2 +-
>  include/soc/arc/aux.h          | 63 +++++++++++++++++++++++++++++++
>  include/soc/nps/common.h       |  4 +-
>  4 files changed, 67 insertions(+), 87 deletions(-)
>  create mode 100644 include/soc/arc/aux.h
> 
> diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
> index 7f3f9f63708c..ccf5dc96713b 100644
> --- a/arch/arc/include/asm/arcregs.h
> +++ b/arch/arc/include/asm/arcregs.h
> @@ -110,90 +110,7 @@
>  
>  #ifndef __ASSEMBLY__
>  
> -/*
> - ******************************************************************
> - *      Inline ASM macros to read/write AUX Regs
> - *      Essentially invocation of lr/sr insns from "C"
> - */
> -
> -#if 1
> -
> -#define read_aux_reg(reg)	__builtin_arc_lr(reg)
> -
> -/* gcc builtin sr needs reg param to be long immediate */
> -#define write_aux_reg(reg_immed, val)		\
> -		__builtin_arc_sr((unsigned int)(val), reg_immed)
> -
> -#else
> -
> -#define read_aux_reg(reg)		\
> -({					\
> -	unsigned int __ret;		\
> -	__asm__ __volatile__(		\
> -	"	lr    %0, [%1]"		\
> -	: "=r"(__ret)			\
> -	: "i"(reg));			\
> -	__ret;				\
> -})
> -
> -/*
> - * Aux Reg address is specified as long immediate by caller
> - * e.g.
> - *    write_aux_reg(0x69, some_val);
> - * This generates tightest code.
> - */
> -#define write_aux_reg(reg_imm, val)	\
> -({					\
> -	__asm__ __volatile__(		\
> -	"	sr   %0, [%1]	\n"	\
> -	:				\
> -	: "ir"(val), "i"(reg_imm));	\
> -})
> -
> -/*
> - * Aux Reg address is specified in a variable
> - *  * e.g.
> - *      reg_num = 0x69
> - *      write_aux_reg2(reg_num, some_val);
> - * This has to generate glue code to load the reg num from
> - *  memory to a reg hence not recommended.
> - */
> -#define write_aux_reg2(reg_in_var, val)		\
> -({						\
> -	unsigned int tmp;			\
> -						\
> -	__asm__ __volatile__(			\
> -	"	ld   %0, [%2]	\n\t"		\
> -	"	sr   %1, [%0]	\n\t"		\
> -	: "=&r"(tmp)				\
> -	: "r"(val), "memory"(&reg_in_var));	\
> -})
> -
> -#endif
> -
> -#define READ_BCR(reg, into)				\
> -{							\
> -	unsigned int tmp;				\
> -	tmp = read_aux_reg(reg);			\
> -	if (sizeof(tmp) == sizeof(into)) {		\
> -		into = *((typeof(into) *)&tmp);		\
> -	} else {					\
> -		extern void bogus_undefined(void);	\
> -		bogus_undefined();			\
> -	}						\
> -}
> -
> -#define WRITE_AUX(reg, into)				\
> -{							\
> -	unsigned int tmp;				\
> -	if (sizeof(tmp) == sizeof(into)) {		\
> -		tmp = (*(unsigned int *)&(into));	\
> -		write_aux_reg(reg, tmp);		\
> -	} else  {					\
> -		extern void bogus_undefined(void);	\
> -		bogus_undefined();			\
> -	}						\
> -}
> +#include <soc/arc/aux.h>
>  
>  /* Helpers */
>  #define TO_KB(bytes)		((bytes) >> 10)
> diff --git a/arch/arc/include/asm/mcip.h b/arch/arc/include/asm/mcip.h
> index c8fbe4114bad..fc28d0944801 100644
> --- a/arch/arc/include/asm/mcip.h
> +++ b/arch/arc/include/asm/mcip.h
> @@ -13,7 +13,7 @@
>  
>  #ifdef CONFIG_ISA_ARCV2
>  
> -#include <asm/arcregs.h>
> +#include <soc/arc/aux.h>
>  
>  #define ARC_REG_MCIP_BCR	0x0d0
>  #define ARC_REG_MCIP_CMD	0x600
> diff --git a/include/soc/arc/aux.h b/include/soc/arc/aux.h
> new file mode 100644
> index 000000000000..8c3fb13e0452
> --- /dev/null
> +++ b/include/soc/arc/aux.h
> @@ -0,0 +1,63 @@
> +/*
> + * Copyright (C) 2016-2017 Synopsys, Inc. (www.synopsys.com)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __SOC_ARC_AUX_H__
> +#define __SOC_ARC_AUX_H__
> +
> +#ifdef CONFIG_ARC
> +
> +#define read_aux_reg(r)		__builtin_arc_lr(r)
> +
> +/* gcc builtin sr needs reg param to be long immediate */
> +#define write_aux_reg(r, v)	__builtin_arc_sr((unsigned int)(v), r)
> +
> +#else	/* !CONFIG_ARC */
> +
> +static inline int read_aux_reg(u32 r)
> +{
> +	return 0;
> +}
> +
> +/*
> + * function helps elide unused variable warning
> + * see: http://lists.infradead.org/pipermail/linux-snps-arc/2016-November/001748.html
> + */
> +static inline void write_aux_reg(u32 r, u32 v)
> +{
> +	;
> +}
> +
> +#endif
> +
> +#define READ_BCR(reg, into)				\
> +{							\
> +	unsigned int tmp;				\
> +	tmp = read_aux_reg(reg);			\
> +	if (sizeof(tmp) == sizeof(into)) {		\
> +		into = *((typeof(into) *)&tmp);		\
> +	} else {					\
> +		extern void bogus_undefined(void);	\
> +		bogus_undefined();			\
> +	}						\
> +}
> +
> +#define WRITE_AUX(reg, into)				\
> +{							\
> +	unsigned int tmp;				\
> +	if (sizeof(tmp) == sizeof(into)) {		\
> +		tmp = (*(unsigned int *)&(into));	\
> +		write_aux_reg(reg, tmp);		\
> +	} else  {					\
> +		extern void bogus_undefined(void);	\
> +		bogus_undefined();			\
> +	}						\
> +}
> +
> +
> +#endif
> diff --git a/include/soc/nps/common.h b/include/soc/nps/common.h
> index 9b1d43d671a3..b7ba05b3993f 100644
> --- a/include/soc/nps/common.h
> +++ b/include/soc/nps/common.h
> @@ -47,6 +47,8 @@
>  
>  #ifndef __ASSEMBLY__
>  
> +#include <soc/arc/aux.h>
> +

So looks like the usage of inline function stub unearthed a small issue in nps
irqchip driver. I think for now I would back out the change above nand fix the
irqchip first before switching over to this header - OK ?

>  /* In order to increase compilation test coverage */
>  #ifdef CONFIG_ARC
>  static inline void nps_ack_gic(void)
> @@ -59,8 +61,6 @@ static inline void nps_ack_gic(void)
>  }
>  #else
>  static inline void nps_ack_gic(void) { }
> -#define write_aux_reg(r, v)
> -#define read_aux_reg(r) 0
>  #endif
>  
>  /* CPU global ID */
> 

  parent reply	other threads:[~2016-11-04 17:37 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-03 23:33 [PATCH v3 00/10] Move ARC timer code into drivers/clocksource/ Vineet Gupta
2016-11-03 23:33 ` [PATCH v3 01/10] ARC: timer: rtc: implement read loop in "C" vs. inline asm Vineet Gupta
2016-11-03 23:33 ` [PATCH v3 02/10] ARC: timer: gfrc, rtc: deuglify big endian code Vineet Gupta
2016-11-03 23:33 ` [PATCH v3 03/10] ARC: timer: gfrc, rtc: Read BCR to detect whether hardware exists Vineet Gupta
2016-11-03 23:33 ` [PATCH v3 04/10] ARC: timer: gfrc: boot print alongside other timers Vineet Gupta
2016-11-03 23:33 ` [PATCH v3 05/10] ARC: time: move time_init() out of the driver Vineet Gupta
2016-11-03 23:33 ` [PATCH v3 06/10] ARC: timer: Build gfrc, rtc under same option (64-bit timers) Vineet Gupta
2016-11-03 23:33 ` [PATCH v3 07/10] ARC: breakout aux handling into a separate header Vineet Gupta
2016-11-04  0:40   ` kbuild test robot
2016-11-07 21:18     ` [PATCH v4 " Vineet Gupta
2016-11-07 21:18       ` Vineet Gupta
2016-11-04 17:35   ` Vineet Gupta [this message]
2016-11-03 23:33 ` [PATCH v3 08/10] ARC: move mcip.h into include/soc and adjust the includes Vineet Gupta
2016-11-03 23:33 ` [PATCH v3 09/10] ARC: breakout timer include code into separate header Vineet Gupta
2016-11-03 23:33 ` [PATCH v3 10/10] clocksource: import ARC timer driver Vineet Gupta
2016-11-10 10:49   ` Daniel Lezcano
2016-11-10 22:12     ` Vineet Gupta
2016-11-08 17:49 ` [PATCH v3 00/10] Move ARC timer code into drivers/clocksource/ Vineet Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5593de35-170a-68a0-6922-42bc60c8f18f@synopsys.com \
    --to=vineet.gupta1@synopsys.com \
    --cc=Alexey.Brodkin@synopsys.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-snps-arc@lists.infradead.org \
    --cc=noamca@mellanox.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®