From: "Uwe Kleine-König" <u.kleine-koenig@baylibre.com>
To: Thierry Reding <thierry.reding@kernel.org>,
Jonathan Hunter <jonathanh@nvidia.com>,
Mikko Perttunen <mperttunen@nvidia.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
linux-pwm@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/3] pwm: tegra: Make use of dev_err_probe()
Date: Fri, 18 Sep 2026 16:33:45 +0200 [thread overview]
Message-ID: <641219a7d76bbcd8fe98b5955f2355ed45f55986.1789741839.git.u.kleine-koenig@baylibre.com> (raw)
In-Reply-To: <cover.1789741839.git.u.kleine-koenig@baylibre.com>
Usage of dev_err_probe() is more compact than dev_err()'s, emits the
error code and handles -ENOMEM and -EPROBE_DEFER properly. Benefit from
these improvements.
Also add a few messages in error paths that lacked an output before.
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
---
drivers/pwm/pwm-tegra.c | 52 ++++++++++++++++++++++++-----------------
1 file changed, 31 insertions(+), 21 deletions(-)
diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index 5cdbe120ba2d..efb7ab60f602 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -316,14 +316,15 @@ static const struct pwm_ops tegra_pwm_ops = {
static int tegra_pwm_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
struct pwm_chip *chip;
struct tegra_pwm_chip *pc;
const struct tegra_pwm_soc *soc;
int ret;
- soc = of_device_get_match_data(&pdev->dev);
+ soc = of_device_get_match_data(dev);
- chip = devm_pwmchip_alloc(&pdev->dev, soc->num_channels, sizeof(*pc));
+ chip = devm_pwmchip_alloc(dev, soc->num_channels, sizeof(*pc));
if (IS_ERR(chip))
return PTR_ERR(chip);
pc = to_tegra_pwm_chip(chip);
@@ -331,28 +332,39 @@ static int tegra_pwm_probe(struct platform_device *pdev)
pc->soc = soc;
pc->regs = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(pc->regs))
+ if (IS_ERR(pc->regs)) {
+ /*
+ * devm_platform_ioremap_resource() already emits an error
+ * message with CONFIG_HAS_IOMEM, so don't emit another message
+ * here.
+ */
return PTR_ERR(pc->regs);
+ }
platform_set_drvdata(pdev, chip);
- pc->clk = devm_clk_get(&pdev->dev, NULL);
+ pc->clk = devm_clk_get(dev, NULL);
if (IS_ERR(pc->clk))
- return PTR_ERR(pc->clk);
+ return dev_err_probe(dev, PTR_ERR(pc->clk), "Failed to get clock\n");
- ret = devm_tegra_core_dev_init_opp_table_common(&pdev->dev);
- if (ret)
+ ret = devm_tegra_core_dev_init_opp_table_common(dev);
+ if (ret) {
+ /*
+ * devm_tegra_core_dev_init_opp_table_common() emits an error
+ * message most of the time, so don't add another.
+ */
return ret;
+ }
- pm_runtime_enable(&pdev->dev);
- ret = pm_runtime_resume_and_get(&pdev->dev);
+ pm_runtime_enable(dev);
+ ret = pm_runtime_resume_and_get(dev);
if (ret)
- return ret;
+ return dev_err_probe(dev, ret, "Failed to runtime resume device\n");
/* Set maximum frequency of the IP */
- ret = dev_pm_opp_set_rate(&pdev->dev, ULONG_MAX);
+ ret = dev_pm_opp_set_rate(dev, ULONG_MAX);
if (ret < 0) {
- dev_err(&pdev->dev, "Failed to set max frequency: %d\n", ret);
+ dev_err_probe(dev, ret, "Failed to set max frequency\n");
goto put_pm;
}
@@ -363,8 +375,7 @@ static int tegra_pwm_probe(struct platform_device *pdev)
*/
pc->clk_rate = clk_get_rate(pc->clk);
if (pc->clk_rate < TEGRA_PWM_DEPTH) {
- dev_err(&pdev->dev, "clock maximum frequency out of range\n");
- ret = -ERANGE;
+ ret = dev_err_probe(dev, -ERANGE, "Clock maximum frequency out of range\n");
goto put_pm;
}
@@ -372,10 +383,9 @@ static int tegra_pwm_probe(struct platform_device *pdev)
pc->min_period_ns =
(NSEC_PER_SEC / (pc->clk_rate / TEGRA_PWM_DEPTH)) + 1;
- pc->rst = devm_reset_control_get_exclusive(&pdev->dev, "pwm");
+ pc->rst = devm_reset_control_get_exclusive(dev, "pwm");
if (IS_ERR(pc->rst)) {
- ret = PTR_ERR(pc->rst);
- dev_err(&pdev->dev, "Reset control is not found: %d\n", ret);
+ ret = dev_err_probe(dev, PTR_ERR(pc->rst), "Failed to get reset control\n");
goto put_pm;
}
@@ -385,17 +395,17 @@ static int tegra_pwm_probe(struct platform_device *pdev)
ret = pwmchip_add(chip);
if (ret < 0) {
- dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+ dev_err_probe(dev, ret, "Adding pwmchip failed\n");
reset_control_assert(pc->rst);
goto put_pm;
}
- pm_runtime_put(&pdev->dev);
+ pm_runtime_put(dev);
return 0;
put_pm:
- pm_runtime_put_sync_suspend(&pdev->dev);
- pm_runtime_force_suspend(&pdev->dev);
+ pm_runtime_put_sync_suspend(dev);
+ pm_runtime_force_suspend(dev);
return ret;
}
--
2.47.3
next prev parent reply other threads:[~2026-09-18 14:34 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-18 14:33 [PATCH v2 0/3] pwm: tegra: Cleanups and .get_state() Uwe Kleine-König
2026-09-18 14:33 ` Uwe Kleine-König [this message]
2026-09-21 9:38 ` [PATCH v2 1/3] pwm: tegra: Make use of dev_err_probe() Thierry Reding
2026-09-21 12:46 ` Uwe Kleine-König
2026-09-21 16:14 ` Thierry Reding
2026-10-02 8:45 ` Uwe Kleine-König
2026-09-18 14:33 ` [PATCH v2 2/3] pwm: tegra: Check for match_data being NULL Uwe Kleine-König
2026-09-21 9:47 ` Thierry Reding
2026-09-21 14:34 ` Uwe Kleine-König
2026-09-21 16:24 ` Thierry Reding
2026-09-21 20:10 ` Uwe Kleine-König
2026-09-22 8:33 ` Uwe Kleine-König
2026-09-22 10:06 ` Thierry Reding
2026-09-30 11:55 ` Uwe Kleine-König
2026-09-30 13:14 ` Thierry Reding
2026-09-30 17:05 ` Uwe Kleine-König
2026-09-18 14:33 ` [PATCH v2 3/3] pwm: tegra: Implement .get_state() Uwe Kleine-König
2026-09-21 10:18 ` Thierry Reding
2026-09-21 14:26 ` Uwe Kleine-König
2026-09-22 10:07 ` Thierry Reding
2026-09-30 9:54 ` Uwe Kleine-König
2026-09-30 10:29 ` Thierry Reding
2026-10-02 8:51 ` Uwe Kleine-König
2026-10-04 15:33 ` Mikko Perttunen
2026-09-21 10:22 ` [PATCH v2 0/3] pwm: tegra: Cleanups and .get_state() Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=641219a7d76bbcd8fe98b5955f2355ed45f55986.1789741839.git.u.kleine-koenig@baylibre.com \
--to=u.kleine-koenig@baylibre.com \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mperttunen@nvidia.com \
--cc=p.zabel@pengutronix.de \
--cc=thierry.reding@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®