From: Peter Rosin <peda@axentia.se>
To: Stephen Warren <swarren@wwwdotorg.org>,
Stephen Warren <swarren@nvidia.com>
Cc: "linux-i2c@vger.kernel.org" <linux-i2c@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: struct i2c_mux_pinctrl_platform_data for the i2c-mux-pinctrl driver
Date: Tue, 23 May 2017 08:49:19 +0200 [thread overview]
Message-ID: <7c06a6f0-e8ef-3abc-3c68-dec7dedbf0ae@axentia.se> (raw)
In-Reply-To: <71dc13f9-f723-fb4b-a101-f7be8caacf1c@wwwdotorg.org>
On 2017-05-22 17:51, Stephen Warren wrote:
> On 05/22/2017 02:24 AM, Peter Rosin wrote:
>> Hi Stephen,
>>
>> I was looking at the i2c-mux-pinctrl driver and noticed that it has
>> code to feed it platform data from C code. There has never been any
>> in-kernel users of this interface and I would like to remove it. I
>> wonder if you added it way back when just because the i2c-mux-gpio
>> driver have such an interface or if, to your knowledge, any external
>> platform exists that depends on this?
>>
>> I.e. I'm talking about removing include/linux/i2c-mux-pinctrl.h and
>> the code supporting it in the driver, thus only allowing devicetree
>> as source for the platform data.
>
> I'm not aware of any in- or out-of-tree users of that structure/feature.
>
> I added it because at the time I wrote that driver, it was common place
> to support both DT-based and platform-data-based
> instantiation/configuration of devices, so I did the same. If you're
That's what I suspected, thanks for confirming!
> removing pdata-based configuration, it would make sense to do a blanket
> removal across the entire I2C subsystem (and other subsystems too) I
> suspect, but that's LinusW's call in the end.
(Wolfram Sang is the I2C maintainer)
Well, a couple of other drivers I looked at still have in-tree users.
This driver stands out in that it never ever had any in-tree user, and
I find no traces of any out-of-tree user either. That last bit might
of course be due to lacking google-fu on my part or that the out-of-
tree user was never available online in the first place. But it is a
data point. Also, removing a third or so of the driver and at the same
time making it easier to follow the code sounds like something I want
to do.
Embarking on the bigger project is however not something I'm signing
up for, not that I don't think it would be worthwhile.
I'll send a patch when I have done some further tests with what I
have cooking...
Cheers,
peda
prev parent reply other threads:[~2017-05-23 6:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-22 8:24 Peter Rosin
2017-05-22 15:51 ` Stephen Warren
2017-05-23 6:49 ` Peter Rosin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7c06a6f0-e8ef-3abc-3c68-dec7dedbf0ae@axentia.se \
--to=peda@axentia.se \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=swarren@nvidia.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®