Re: [PATCH 2/2] net: ethernet: nb8800: handle all RGMII declinations

[Florian Fainelli <f.fainelli@gmail.com>]

On 11/04/2016 08:05 AM, Sebastian Frias wrote:
> Commit a999589ccaae ("phylib: add RGMII-ID interface mode definition")
> and commit 7d400a4c5897 ("phylib: add PHY interface modes for internal
> delay for tx and rx only") added several RGMII declinations:
> PHY_INTERFACE_MODE_RGMII_ID, PHY_INTERFACE_MODE_RGMII_RXID and
> PHY_INTERFACE_MODE_RGMII_TXID to deal with internal delays.
> 
> Those are all RGMII modes (1Gbit) and must be considered that way when
> setting the MAC Mode or the Pads Mode for the HW to work properly.
> 
> Signed-off-by: Sebastian Frias <sf84@laposte.net>
> ---
>  drivers/net/ethernet/aurora/nb8800.c | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/aurora/nb8800.c b/drivers/net/ethernet/aurora/nb8800.c
> index d2855c9..6230ace 100644
> --- a/drivers/net/ethernet/aurora/nb8800.c
> +++ b/drivers/net/ethernet/aurora/nb8800.c
> @@ -609,7 +609,10 @@ static void nb8800_mac_config(struct net_device *dev)
>  		mac_mode |= HALF_DUPLEX;
>  
>  	if (gigabit) {
> -		if (priv->phy_mode == PHY_INTERFACE_MODE_RGMII)
> +		if (priv->phy_mode == PHY_INTERFACE_MODE_RGMII ||
> +		    priv->phy_mode == PHY_INTERFACE_MODE_RGMII_ID ||
> +		    priv->phy_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
> +		    priv->phy_mode == PHY_INTERFACE_MODE_RGMII_TXID)

phy_interface_is_rgmii(phydev)?

>  			mac_mode |= RGMII_MODE;
>  
>  		mac_mode |= GMAC_MODE;
> @@ -1278,9 +1281,8 @@ static int nb8800_tangox_init(struct net_device *dev)
>  		break;
>  
>  	case PHY_INTERFACE_MODE_RGMII:
> -		pad_mode = PAD_MODE_RGMII;
> -		break;
> -
> +	case PHY_INTERFACE_MODE_RGMII_ID:
> +	case PHY_INTERFACE_MODE_RGMII_RXID:
>  	case PHY_INTERFACE_MODE_RGMII_TXID:
>  		pad_mode = PAD_MODE_RGMII;
>  		break;
> 

-- 
Florian