[PATCH 3.12 04/84] staging: comedi: usbduxsigma: don't clobber ao_timer in command test

[Jiri Slaby <jslaby@suse.cz>]

From: Ian Abbott <abbotti@mev.co.uk>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit c04a1f17803e0d3eeada586ca34a6b436959bc20 upstream

`devpriv->ao_timer` is used while an asynchronous command is running on
the AO subdevice.  It also gets modified by the subdevice's `cmdtest`
handler for checking new asynchronous commands,
`usbduxsigma_ao_cmdtest()`, which is not correct as it's allowed to
check new commands while an old command is still running.  Fix it by
moving the code which sets up `devpriv->ao_timer` into the subdevice's
`cmd` handler, `usbduxsigma_ao_cmd()`.

** This backported patch also moves the code that sets up
`devpriv->ao_sample_count` and `devpriv->ao_continuous` from
`usbduxsigma_ao_cmdtest()` to `usbduxsigma_ao_cmd()` for the same reason
as above.  (This was not needed in the upstream commit.) **

Note that the removed code in `usbduxsigma_ao_cmdtest()` checked that
`devpriv->ao_timer` did not end up less that 1, but that could not
happen due because `cmd->scan_begin_arg` or `cmd->convert_arg` had
already been range-checked.

Also note that we tested the `high_speed` variable in the old code, but
that is currently always 0 and means that we always use "scan" timing
(`cmd->scan_begin_src == TRIG_TIMER` and `cmd->convert_src == TRIG_NOW`)
and never "convert" (individual sample) timing (`cmd->scan_begin_src ==
TRIG_FOLLOW` and `cmd->convert_src == TRIG_TIMER`).  The moved code
tests `cmd->convert_src` instead to decide whether "scan" or "convert"
timing is being used, although currently only "scan" timing is
supported.

Fixes: fb1ef622e7a3 ("staging: comedi: usbduxsigma: tidy up analog output command support")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/staging/comedi/drivers/usbduxsigma.c | 41 ++++++++++++----------------
 1 file changed, 17 insertions(+), 24 deletions(-)

diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index c61a1b9d7cd8..580c1358eb84 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -950,10 +950,24 @@ static int usbduxsigma_ao_cmdtest(struct comedi_device *dev,
 	if (err)
 		return 3;
 
-	/* Step 4: fix up any arguments */
+	return 0;
+}
+
+static int usbduxsigma_ao_cmd(struct comedi_device *dev,
+			      struct comedi_subdevice *s)
+{
+	struct usbduxsigma_private *devpriv = dev->private;
+	struct comedi_cmd *cmd = &s->async->cmd;
+	int ret;
+	int i;
+
+	down(&devpriv->sem);
+
+	/* set current channel of the running acquisition to zero */
+	s->async->cur_chan = 0;
 
 	/* we count in timer steps */
-	if (high_speed) {
+	if (cmd->convert_src == TRIG_TIMER) {
 		/* timing of the conversion itself: every 125 us */
 		devpriv->ao_timer = cmd->convert_arg / 125000;
 	} else {
@@ -963,12 +977,9 @@ static int usbduxsigma_ao_cmdtest(struct comedi_device *dev,
 		 */
 		devpriv->ao_timer = cmd->scan_begin_arg / 1000000;
 	}
-	if (devpriv->ao_timer < 1)
-		err |= -EINVAL;
-
 	if (cmd->stop_src == TRIG_COUNT) {
 		/* not continuous, use counter */
-		if (high_speed) {
+		if (cmd->convert_src == TRIG_TIMER) {
 			/* high speed also scans everything at once */
 			devpriv->ao_sample_count = cmd->stop_arg *
 						   cmd->scan_end_arg;
@@ -987,24 +998,6 @@ static int usbduxsigma_ao_cmdtest(struct comedi_device *dev,
 		devpriv->ao_sample_count = 0;
 	}
 
-	if (err)
-		return 4;
-
-	return 0;
-}
-
-static int usbduxsigma_ao_cmd(struct comedi_device *dev,
-			      struct comedi_subdevice *s)
-{
-	struct usbduxsigma_private *devpriv = dev->private;
-	struct comedi_cmd *cmd = &s->async->cmd;
-	int ret;
-	int i;
-
-	down(&devpriv->sem);
-
-	/* set current channel of the running acquisition to zero */
-	s->async->cur_chan = 0;
 	for (i = 0; i < cmd->chanlist_len; ++i)
 		devpriv->ao_chanlist[i] = CR_CHAN(cmd->chanlist[i]);
 
-- 
2.6.0