Re: [PATCH v8 04/11] arm64: dts: renesas: add support for solidrun rzg2l som and hb-iiot evb

[Geert Uytterhoeven <geert@linux-m68k.org>]

Hi Josua,

On Fri, 4 Sept 2026 at 13:56, Josua Mayer <josua@solid-run.com> wrote:
> Add support for the SolidRun RZ/G2L SoM [1] on HummingBoard IIoT [2].
>
> The SoM features:
> - 2x 1Gbps Ethernet with PHY
> - eMMC
> - 1/2GB DDR
> - WiFi + Bluetooth
> - SDHI Mux switching between eMMC and Carrier Board
>
> The HummingBoard IIoT features:
> - 3x USB-2.0 Type A connector
> - 2x 1Gbps RJ45 Ethernet
> - USB Type-C Console Port
> - microSD connector
> - RTC with backup battery
> - RGB Status LED
> - 1x M.2 B-Key connector with USB-2.0 + SIM card holder
> - 1x DSI Display Connector
> - GPIO header
> - 2x RS232/RS485 ports (configurable)
> - 2x CAN
>
> Descriptions for eMMC, microSD and RS485 are provided as overlays due to
> their dependency on configurable mux states.
>
> [1] https://www.solid-run.com/embedded-industrial-iot/renesas-rz-family/rz-g2l-som/
> [2] https://www.solid-run.com/embedded-industrial-iot/renesas-rz-family/hummingboard-rz-series-sbcs/hummingboard-rz-g2l-iot-sbc/
>
> Signed-off-by: Josua Mayer <josua@solid-run.com>

Thanks for your patch!

> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-iiot-common.dtsi

> +       aliases {
> +               gpio1 = &tca6408_u48;
> +               gpio2 = &tca6408_u37;
> +               gpio3 = &tca6416_u20;
> +               gpio4 = &tca6416_u21;

The TCA64xx driver does not seem to support gpio aliases, so please
drop these.

> +               i2c3 = &i2c_exp;
> +               i2c4 = &i2c_csi;
> +               i2c5 = &i2c_dsi;
> +               i2c6 = &i2c_lvds;
> +               rtc0 = &carrier_rtc;
> +               rtc1 = &pmic;
> +               serial3 = &scif3;
> +       };

> +       v_1_2: regulator-1-2 {

Preferred node name is "regulator-1v2"...

> +               compatible = "regulator-fixed";
> +               regulator-name = "1v2";
> +               regulator-max-microvolt = <1200000>;
> +               regulator-min-microvolt = <1200000>;
> +       };
> +
> +       v_3_3: regulator-3-3 {

... "regulator-3v3".

> +               compatible = "regulator-fixed";
> +               regulator-name = "3v3";
> +               regulator-max-microvolt = <3300000>;
> +               regulator-min-microvolt = <3300000>;
> +       };

> +&i2c0 {
> +       /* highest i2c clock supported by all peripherals is 400kHz */

We have a DT propery for that ;-)

    clock-frequency = <400000>;

Same for i2c1.

> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/rzg2l-sr-som.dtsi
> @@ -0,0 +1,480 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/*
> + * Device Tree Source for the RZ/G2L Solidrun SoM
> + *
> + * Copyright 2023 SolidRun Ltd.
> + * Copyright 2025 Josua Mayer <josua@solid-run.com>
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
> +
> +/ {
> +       aliases {
> +               ethernet0 = &eth0;
> +               ethernet1 = &eth1;
> +               gpio0 = &pinctrl;

The pin control driver does not support gpio aliases, so please
drop this.

> +               i2c0 = &i2c0;
> +               i2c1 = &i2c1;
> +               i2c2 = &i2c3;
> +               mmc0 = &sdhi0;
> +               mmc1 = &sdhi1;
> +               rtc0 = &pmic;
> +               serial0 = &scif0;
> +               serial1 = &scif1;
> +               serial2 = &scif2;
> +       };

I didn't compare with the board schematics, but the rest LGTM.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds