From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Josua Mayer <josua@solid-run.com>
Cc: Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Benjamin Bara <benjamin.bara@skidata.com>,
Linus Walleij <linusw@kernel.org>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
Jon Nettleton <jon@solid-run.com>,
Mikhail Anikin <mikhail.anikin@solid-run.com>,
Yazan Shhady <yazan.shhady@solid-run.com>,
"linux-renesas-soc@vger.kernel.org"
<linux-renesas-soc@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>
Subject: Re: [PATCH v9 08/11] arm64: dts: renesas: add support for solidrun hb-ripple with rzg2l som
Date: Mon, 28 Sep 2026 19:00:03 +0200 [thread overview]
Message-ID: <CAMuHMdXAe7U1u69L-O5bvErXN6V3L-=59ewYezcEHcoDodjQpg@mail.gmail.com> (raw)
In-Reply-To: <1a208595-6442-43d3-b1e8-c4f93856a7ea@solid-run.com>
Hi Josua,
On Mon, 28 Sept 2026 at 18:21, Josua Mayer <josua@solid-run.com> wrote:
> Am 28.09.26 um 18:10 schrieb Geert Uytterhoeven:
> > On Mon, 28 Sept 2026 at 16:40, Josua Mayer <josua@solid-run.com> wrote:
> >> Add support for the SolidRun HummingBoard Ripple [2] with RZ/G2L
> >> SoM [1].
> >>
> >> The HummingBoard Ripple is a reduced version of HummingBoard Pulse,
> >> featuring:
> >> - 2x USB-2.0 Type-A connector
> >> - 1x 1Gbps RJ45 Ethernet
> >> - micro-HDMI connector
> >> - microSD connector
> >> - mini-PCI-E connector with SIM slot supporting USB-2.0 interface
> >> - MIPI-CSI Camera Connector (not described without specific camera)
> >> - RTC with backup battery
> >>
> >> The carrier board is identical between RZ/G2L, RZ/G2LC, RZ/G2UL and
> >> RZ/V2L SoMs, yet only the RZ/G2LC combination has a product page [2].
> >>
> >> While the variant being supported here is named "Ripple", shared include
> >> files are still named according to the full board for consistency with
> >> schematics, silk screen labels and other SoMs on same board.
> >>
> >> Description for microSD is shared with HummingBoard IIoT.
> >>
> >> [1] https://www.solid-run.com/embedded-industrial-iot/renesas-rz-family/rz-g2l-som/
> >> [2] https://www.solid-run.com/embedded-industrial-iot/renesas-rz-family/hummingboard-rz-series-sbcs/hummingboard-rz-g2lc-base/
> >>
> >> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> >> Signed-off-by: Josua Mayer <josua@solid-run.com>
> > Thanks for the update!
> >
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-hummingboard-ripple.dts
> >> @@ -0,0 +1,17 @@
> >> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >> +/*
> >> + * Copyright 2025 Josua Mayer <josua@solid-run.com>
> >> + */
> >> +
> >> +/dts-v1/;
> >> +
> >> +#include "r9a07g044l2.dtsi"
> >> +#include "rzg2l-sr-som.dtsi"
> >> +#include "rzg2l-hummingboard-ripple.dtsi"
> >> +#include "rzg2l-hummingboard-pulse-micro-hdmi.dtsi"
> > This new include is not needed, as rzg2l-hummingboard-ripple.dtsi
> > already includes it:
> >
> >
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-ripple.dtsi
> >> @@ -0,0 +1,125 @@
> >> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >> +/*
> >> + * Copyright 2025 Josua Mayer <josua@solid-run.com>
> >> + */
> >> +
> >> +#include "rzg2l-hummingboard-pulse-common.dtsi"
> >> +#include "rzg2l-hummingboard-pulse-micro-hdmi.dtsi"
> > Same for patch [09/11].
> >
> > Patch [10/11] is fine, as that one does not share
> > rzg2l-hummingboard-ripple.dtsi.
> >
> > As the rest LGTM, I can fix that while applying, so no need to send
> > a v10.
>
> Thanks!
>
> Since Sashiko also found a small issue in patch 11/11 ... v10 can still
> be considered.
OK.
> To the includes, I would actually suggest a different solution for the
> duplicate include,
> considering that I got confused about it:
>
> diff --git
> a/arch/arm64/boot/dts/renesas/r9a07g044l2-hummingboard-ripple.dts
> b/arch/arm64/boot/dts/renesas/r9a07g044l2-hummingboard-ripple.dts
> index 493a2b9b51d25..95a36f8804b55 100644
> --- a/arch/arm64/boot/dts/renesas/r9a07g044l2-hummingboard-ripple.dts
> +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-hummingboard-ripple.dts
> @@ -7,8 +7,9 @@
>
> #include "r9a07g044l2.dtsi"
> #include "rzg2l-sr-som.dtsi"
> -#include "rzg2l-hummingboard-ripple.dtsi"
> +#include "rzg2l-hummingboard-pulse-common.dtsi"
> #include "rzg2l-hummingboard-pulse-micro-hdmi.dtsi"
> +#include "rzg2l-hummingboard-ripple.dtsi"
>
> / {
> compatible = "solidrun,rzg2l-hummingboard-ripple",
> "solidrun,rzg2l-sr-som",
> diff --git
> a/arch/arm64/boot/dts/renesas/r9a07g054l2-hummingboard-ripple.dts
> b/arch/arm64/boot/dts/renesas/r9a07g054l2-hummingboard-ripple.dts
> index 3df7c67d75a25..0c73871524541 100644
> --- a/arch/arm64/boot/dts/renesas/r9a07g054l2-hummingboard-ripple.dts
> +++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-hummingboard-ripple.dts
> @@ -7,8 +7,9 @@
>
> #include "r9a07g054l2.dtsi"
> #include "rzg2l-sr-som.dtsi"
> -#include "rzg2l-hummingboard-ripple.dtsi"
> +#include "rzg2l-hummingboard-pulse-common.dtsi"
> #include "rzg2l-hummingboard-pulse-micro-hdmi.dtsi"
> +#include "rzg2l-hummingboard-ripple.dtsi"
>
> / {
> compatible = "solidrun,rzv2l-hummingboard-ripple",
> "solidrun,rzv2l-sr-som",
> diff --git a/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-ripple.dtsi
> b/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-ripple.dtsi
> index d5bd9b7de4282..aeb92630f4c6b 100644
> --- a/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-ripple.dtsi
> +++ b/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-ripple.dtsi
> @@ -3,9 +3,6 @@
> * Copyright 2025 Josua Mayer <josua@solid-run.com>
> */
>
> -#include "rzg2l-hummingboard-pulse-common.dtsi"
> -#include "rzg2l-hummingboard-pulse-micro-hdmi.dtsi"
> -
> / {
> aliases {
> /* this board does not use second phy / ethernet on SoM */
That sounds good to me, too.
BTW, there seem to be more commonalities that can be factored out of
rzg2l-hummingboard-ripple.dtsi and r9a07g044c2-hummingboard-ripple.dts.
Of course that can be done later, too.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next prev parent reply other threads:[~2026-09-28 17:06 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-28 14:39 [PATCH v9 00/11] arm64: dts: renesas: Add various SolidRun RZ/G2 based boards Josua Mayer
2026-09-28 14:39 ` [PATCH v9 01/11] dt-bindings: soc: " Josua Mayer
2026-09-28 14:39 ` [PATCH v9 02/11] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow input-/output-disable Josua Mayer
2026-09-28 14:39 ` [PATCH v9 03/11] dt-bindings: usb: cypress,hx3: make peer-hub property optional Josua Mayer
2026-09-28 14:39 ` [PATCH v9 04/11] arm64: dts: renesas: add support for solidrun rzg2l som and hb-iiot evb Josua Mayer
2026-09-28 16:14 ` Geert Uytterhoeven
2026-09-28 14:39 ` [PATCH v9 05/11] arm64: dts: renesas: add support for solidrun rzv2l " Josua Mayer
2026-09-28 14:39 ` [PATCH v9 06/11] arm64: dts: renesas: add support for solidrun rzg2lc " Josua Mayer
2026-09-28 14:39 ` [PATCH v9 07/11] arm64: dts: renesas: rzg2l(c)/rzv2l hb-iiot: add dsi panel dt overlay Josua Mayer
2026-09-28 14:39 ` [PATCH v9 08/11] arm64: dts: renesas: add support for solidrun hb-ripple with rzg2l som Josua Mayer
2026-09-28 16:10 ` Geert Uytterhoeven
2026-09-28 16:21 ` Josua Mayer
2026-09-28 17:00 ` Geert Uytterhoeven [this message]
2026-09-28 14:39 ` [PATCH v9 09/11] arm64: dts: renesas: add support for solidrun hb-ripple with rzv2l som Josua Mayer
2026-09-28 14:39 ` [PATCH v9 10/11] arm64: dts: renesas: add support for solidrun hb-ripple with rzg2lc som Josua Mayer
2026-09-28 14:39 ` [PATCH v9 11/11] arm64: dts: renesas: add support for solidrun rzg2ul som on hb-ripple Josua Mayer
2026-09-28 16:32 ` Josua Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAMuHMdXAe7U1u69L-O5bvErXN6V3L-=59ewYezcEHcoDodjQpg@mail.gmail.com' \
--to=geert@linux-m68k.org \
--cc=benjamin.bara@skidata.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jon@solid-run.com \
--cc=josua@solid-run.com \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mikhail.anikin@solid-run.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh@kernel.org \
--cc=yazan.shhady@solid-run.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®