From: "Luca Weiss" <luca.weiss@fairphone.com>
To: "Mukesh Ojha" <mukesh.ojha@oss.qualcomm.com>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konradybcio@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: qcom: Drop unused remoteproc_adsp_glink label
Date: Tue, 19 May 2026 10:55:57 +0200 [thread overview]
Message-ID: <DIMJ0GE2UNHS.VVZVQKVBXBLX@fairphone.com> (raw)
In-Reply-To: <20260409181329.556899-1-mukesh.ojha@oss.qualcomm.com>
On Thu Apr 9, 2026 at 8:13 PM CEST, Mukesh Ojha wrote:
> The remoteproc_adsp_glink label on the ADSP glink-edge node has no
> users in the upstream tree across all affected SoCs. The only user
> of this label is qcs6490-audioreach.dtsi which references the label
> defined in its own SoC dtsi and is left untouched.
>
> Remove the label from kaanapali, kodiak, lemans, monaco,
nit: Not from kodiak, as you wrote above.
Regards
Luca
> sar2130p, sc8180x, sc8280xp, sm8450, sm8550, sm8650 and sm8750.
>
> Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
> ---
> Not sure, if these should be individual patches..
>
> arch/arm64/boot/dts/qcom/kaanapali.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/lemans.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/monaco.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/sar2130p.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/sc8180x.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/sm8450.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/sm8650.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/sm8750.dtsi | 2 +-
> 10 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
> index 7cc326aa1a1a..39aad33f42c5 100644
> --- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi
> +++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
> @@ -2634,7 +2634,7 @@ remoteproc_adsp: remoteproc@6800000 {
>
> status = "disabled";
>
> - remoteproc_adsp_glink: glink-edge {
> + glink-edge {
> interrupts-extended = <&ipcc IPCC_MPROC_LPASS
> IPCC_MPROC_SIGNAL_GLINK_QMP
> IRQ_TYPE_EDGE_RISING>;
> diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
> index fe6e76351823..c5976e19fc4a 100644
> --- a/arch/arm64/boot/dts/qcom/lemans.dtsi
> +++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
> @@ -7483,7 +7483,7 @@ remoteproc_adsp: remoteproc@30000000 {
>
> status = "disabled";
>
> - remoteproc_adsp_glink: glink-edge {
> + glink-edge {
> interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> IPCC_MPROC_SIGNAL_GLINK_QMP
> IRQ_TYPE_EDGE_RISING>;
> diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi
> index 7b1d57460f1e..e44a42173d2d 100644
> --- a/arch/arm64/boot/dts/qcom/monaco.dtsi
> +++ b/arch/arm64/boot/dts/qcom/monaco.dtsi
> @@ -2795,7 +2795,7 @@ remoteproc_adsp: remoteproc@3000000 {
>
> status = "disabled";
>
> - remoteproc_adsp_glink: glink-edge {
> + glink-edge {
> interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> IPCC_MPROC_SIGNAL_GLINK_QMP
> IRQ_TYPE_EDGE_RISING>;
> diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
> index d65ad0df6865..3c9529bb2f76 100644
> --- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
> @@ -1612,7 +1612,7 @@ remoteproc_adsp: remoteproc@3000000 {
>
> status = "disabled";
>
> - remoteproc_adsp_glink: glink-edge {
> + glink-edge {
> interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> IPCC_MPROC_SIGNAL_GLINK_QMP
> IRQ_TYPE_EDGE_RISING>;
> diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
> index f45deb188c6c..6d36d377e05e 100644
> --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
> @@ -3755,7 +3755,7 @@ remoteproc_adsp: remoteproc@17300000 {
>
> status = "disabled";
>
> - remoteproc_adsp_glink: glink-edge {
> + glink-edge {
> interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
> label = "lpass";
> qcom,remote-pid = <2>;
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 761f229e8f47..416991bf9cba 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -2956,7 +2956,7 @@ remoteproc_adsp: remoteproc@3000000 {
>
> status = "disabled";
>
> - remoteproc_adsp_glink: glink-edge {
> + glink-edge {
> interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> IPCC_MPROC_SIGNAL_GLINK_QMP
> IRQ_TYPE_EDGE_RISING>;
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 03bf30b53f28..ffc4ab021ad7 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -2798,7 +2798,7 @@ remoteproc_adsp: remoteproc@3000000 {
>
> status = "disabled";
>
> - remoteproc_adsp_glink: glink-edge {
> + glink-edge {
> interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> IPCC_MPROC_SIGNAL_GLINK_QMP
> IRQ_TYPE_EDGE_RISING>;
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index 912525e9bca6..e5dc3dc19f04 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -2797,7 +2797,7 @@ remoteproc_adsp: remoteproc@6800000 {
>
> status = "disabled";
>
> - remoteproc_adsp_glink: glink-edge {
> + glink-edge {
> interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> IPCC_MPROC_SIGNAL_GLINK_QMP
> IRQ_TYPE_EDGE_RISING>;
> diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> index 1604bc8cff37..a4b71fd3ca14 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> @@ -4486,7 +4486,7 @@ remoteproc_adsp: remoteproc@6800000 {
>
> status = "disabled";
>
> - remoteproc_adsp_glink: glink-edge {
> + glink-edge {
> interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> IPCC_MPROC_SIGNAL_GLINK_QMP
> IRQ_TYPE_EDGE_RISING>;
> diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> index 18fb52c14acd..63fcc6c749a5 100644
> --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> @@ -2217,7 +2217,7 @@ remoteproc_adsp: remoteproc@6800000 {
>
> status = "disabled";
>
> - remoteproc_adsp_glink: glink-edge {
> + glink-edge {
> interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> IPCC_MPROC_SIGNAL_GLINK_QMP
> IRQ_TYPE_EDGE_RISING>;
next prev parent reply other threads:[~2026-05-19 8:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-09 18:13 Mukesh Ojha
2026-04-09 18:48 ` Dmitry Baryshkov
2026-05-19 8:51 ` Mukesh Ojha
2026-05-19 8:55 ` Luca Weiss [this message]
2026-05-19 9:06 ` Mukesh Ojha
2026-05-23 2:19 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DIMJ0GE2UNHS.VVZVQKVBXBLX@fairphone.com \
--to=luca.weiss@fairphone.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mukesh.ojha@oss.qualcomm.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®