From: Peter Zijlstra <peterz@infradead.org>
To: Hao Jia <jiahao.os@bytedance.com>
Cc: mingo@redhat.com, mingo@kernel.org, juri.lelli@redhat.com,
vincent.guittot@linaro.org, dietmar.eggemann@arm.com,
rostedt@goodmis.org, bsegall@google.com, mgorman@suse.de,
bristot@redhat.com, vschneid@redhat.com,
mgorman@techsingularity.net, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] sched/core: Adapt WARN_DOUBLE_CLOCK machinery for core-sched
Date: Mon, 20 Feb 2023 13:46:07 +0100 [thread overview]
Message-ID: <Y/Nrj4zdEPDxcc3+@hirez.programming.kicks-ass.net> (raw)
In-Reply-To: <20230215073927.97802-1-jiahao.os@bytedance.com>
On Wed, Feb 15, 2023 at 03:39:27PM +0800, Hao Jia wrote:
> When sched_core_enabled(), we sometimes need to call update_rq_clock()
> to update the rq clock of sibling CPUs on the same core, before that we
> need to clear RQCF_UPDATED of rq->clock_update_flags to avoid the
> WARN_DOUBLE_CLOCK warning. Because at this time the rq->clock_update_flags
> of sibling CPUs may be RQCF_UPDATED. If sched_core_enabled(), we will get
> a core wide rq->lock, so at this point we can safely clear RQCF_UPDATED of
> rq->clock_update_flags of all CPUs on this core to avoid the
> WARN_DOUBLE_CLOCK warning.
>
> We cannot clear rq->clock_update_flags of other cpus on the same core in
> rq_pin_lock(). Because in some functions, we will temporarily give up
> core wide rq->lock, and then use raw_spin_rq_lock() to obtain core wide
> rq->lock, such as newidle_balance() and _double_lock_balance().
>
> Steps to reproduce:
> 1. Enable CONFIG_SCHED_DEBUG and CONFIG_SCHED_CORE when compiling
> the kernel
> 2. echo 1 > /sys/kernel/debug/clear_warn_once
> echo "WARN_DOUBLE_CLOCK" > /sys/kernel/debug/sched/features
> 3. Run the linux/tools/testing/selftests/sched/cs_prctl_test test
>
> Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
> ---
> - Adapt WARN_DOUBLE_CLOCK machinery for core-sched instead of clearing
> WARN_DOUBLE_CLOCK warning one by one.
> - Modify commit information
> [v1] https://lore.kernel.org/all/20221206070550.31763-1-jiahao.os@bytedance.com
>
> kernel/sched/core.c | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/kernel/sched/core.c b/kernel/sched/core.c
> index e838feb6adc5..16a33e5adb77 100644
> --- a/kernel/sched/core.c
> +++ b/kernel/sched/core.c
> @@ -427,11 +427,27 @@ void sched_core_put(void)
> schedule_work(&_work);
> }
>
> +static inline void sched_core_rq_clock_clear_update(struct rq *rq)
> +{
> +#ifdef CONFIG_SCHED_DEBUG
> + const struct cpumask *smt_mask;
> + int i;
> +
> + if (rq->core_enabled) {
> + smt_mask = cpu_smt_mask(rq->cpu);
> + for_each_cpu(i, smt_mask) {
> + if (rq->cpu != i)
> + cpu_rq(i)->clock_update_flags &= (RQCF_REQ_SKIP|RQCF_ACT_SKIP);
> + }
> + }
> +#endif
So sort of ok, but that function name.... so long :/
> +}
> #else /* !CONFIG_SCHED_CORE */
>
> static inline void sched_core_enqueue(struct rq *rq, struct task_struct *p) { }
> static inline void
> sched_core_dequeue(struct rq *rq, struct task_struct *p, int flags) { }
> +static inline void sched_core_rq_clock_clear_update(struct rq *rq) { }
>
> #endif /* CONFIG_SCHED_CORE */
>
> @@ -546,6 +562,7 @@ void raw_spin_rq_lock_nested(struct rq *rq, int subclass)
> if (likely(lock == __rq_lockp(rq))) {
> /* preempt_count *MUST* be > 1 */
> preempt_enable_no_resched();
> + sched_core_rq_clock_clear_update(rq);
> return;
> }
> raw_spin_unlock(lock);
This otoh don't make much sense. Why put it here and not extend
rq_pin_lock()?
That is, what's wrong with something like so?
---
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 771f8ddb7053..c1a92eced930 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1571,11 +1571,18 @@ static inline void rq_pin_lock(struct rq *rq, struct rq_flags *rf)
rf->cookie = lockdep_pin_lock(__rq_lockp(rq));
#ifdef CONFIG_SCHED_DEBUG
- rq->clock_update_flags &= (RQCF_REQ_SKIP|RQCF_ACT_SKIP);
- rf->clock_update_flags = 0;
#ifdef CONFIG_SMP
SCHED_WARN_ON(rq->balance_callback && rq->balance_callback != &balance_push_callback);
#endif
+ rf->clock_update_flags = 0;
+ if (sched_core_enabled()) {
+ int i;
+
+ for_each_cpu(i, cpu_smt_mask(rq->cpu))
+ cpu_rq(i)->clock_update_flags &= (RQCF_REQ_SKIP|RQCF_ACT_SKIP);
+ } else {
+ rq->clock_update_flags &= (RQCF_REQ_SKIP|RQCF_ACT_SKIP);
+ }
#endif
}
next prev parent reply other threads:[~2023-02-20 14:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-15 7:39 Hao Jia
2023-02-20 12:46 ` Peter Zijlstra [this message]
2023-02-22 11:52 ` [External] " Hao Jia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y/Nrj4zdEPDxcc3+@hirez.programming.kicks-ass.net \
--to=peterz@infradead.org \
--cc=bristot@redhat.com \
--cc=bsegall@google.com \
--cc=dietmar.eggemann@arm.com \
--cc=jiahao.os@bytedance.com \
--cc=juri.lelli@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgorman@suse.de \
--cc=mgorman@techsingularity.net \
--cc=mingo@kernel.org \
--cc=mingo@redhat.com \
--cc=rostedt@goodmis.org \
--cc=vincent.guittot@linaro.org \
--cc=vschneid@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®