2.6.23-rc1-mm2 + cpufreq patch + hot-fixes -- [<f8ea528f>] usb_stor_scan_thread+0xbd/0x15a [usb_storage]

["Miles Lane" <miles.lane@gmail.com>]

usb usb4: usb resume
ehci_hcd 0000:00:1d.7: resume root hub
hub 4-0:1.0: hub_resume
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
hub 4-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 3 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
usb 4-3: new high speed USB device using ehci_hcd and address 2
ehci_hcd 0000:00:1d.7: port 3 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
usb 4-3: default language 0x0409
usb 4-3: new device found, idVendor=0781, idProduct=5150
usb 4-3: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-3: Product: Cruzer Mini
usb 4-3: Manufacturer: SanDisk Corporation
usb 4-3: SerialNumber: SNDK5C31950CBB106202
usb 4-3: uevent
usb 4-3: usb_probe_device
usb 4-3: configuration #1 chosen from 1 choice
usb 4-3: adding 4-3:1.0 (config #1, interface 0)
usb 4-3:1.0: uevent
usb 4-3:1.0: uevent
drivers/usb/core/inode.c: creating file '002'
Initializing USB Mass Storage driver...
usb-storage 4-3:1.0: usb_probe_interface
usb-storage 4-3:1.0: usb_probe_interface - got id
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
schedule_timeout: wrong timeout value f8ea51d2
 [<c01080ab>] show_trace_log_lvl+0x12/0x25
 [<c0108a9e>] show_trace+0xd/0x10
 [<c0108bac>] dump_stack+0x16/0x18
 [<c031e31e>] schedule_timeout+0x2c/0x8b
 [<f8ea528f>] usb_stor_scan_thread+0xbd/0x15a [usb_storage]
 [<c0139d64>] kthread+0x3b/0x63
 [<c0107c63>] kernel_thread_helper+0x7/0x10
 =======================
USB Mass Storage support registered.
scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Mini      0.4  PQ: 0 ANSI: 2
sd 2:0:0:0: [sdb] 2001888 512-byte hardware sectors (1025 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 2001888 512-byte hardware sectors (1025 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete