mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Shawn Lin <shawn.lin@rock-chips.com>
To: Coia Prant <coiaprant@gmail.com>
Cc: shawn.lin@rock-chips.com,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Manivannan Sadhasivam <mani@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	Vinod Koul <vkoul@kernel.org>
Subject: Re: [PATCH v13 2/2] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568
Date: Wed, 7 Oct 2026 08:53:16 +0800	[thread overview]
Message-ID: <ac2a4e80-6d35-457a-bdc5-ee8511198bec@rock-chips.com> (raw)
In-Reply-To: <20261006162807.2843858-3-coiaprant@gmail.com>

在 2026/10/07 星期三 0:28, Coia Prant 写道:
> On RK3568, the SGMII interface can be routed to either GMAC0 or
> GMAC1 via the GRF register pipe_sgmii_mac_sel.
> 
> Add support for this selection by introducing the
> "rockchip,sgmii-mac-sel" DT property.
> 
>  From the RK3568 TRM (Part1, Page 229), the PIPE_GRF_XPCS_CON0
> bit 1 (pipe_sgmii_mac_sel) is defined as:
> 
>      0: SGMII routed to GMAC0
>      1: SGMII routed to GMAC1
> 
> The hardware reset value is 1 (GMAC1). If the property is set to 0,
> the driver routes SGMII to GMAC0; if set to 1, it routes to GMAC1.
> If the property is absent, the driver leaves the routing unchanged,
> so the effective value is whatever the bootloader or hardware reset
> left.
> 
> The driver validates the value and rejects anything other than 0 or 1.
> 
> This is necessary for boards such as the Ariaboard Photonicat, which
> uses the SGMII interface connected to GMAC0.
> 
> Link: https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part1%20V1.1-20210301.pdf (Page 229)
> Signed-off-by: Coia Prant <coiaprant@gmail.com>
> ---
>   .../rockchip/phy-rockchip-naneng-combphy.c    | 42 +++++++++++++++++++
>   1 file changed, 42 insertions(+)
> 
> diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
> index 7843356a4dd47..f76b48009673d 100644
> --- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
> +++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
> @@ -186,6 +186,7 @@ struct rockchip_combphy_grfcfg {
>   	struct combphy_reg pipe_xpcs_phy_ready;
>   	struct combphy_reg pipe_pcie1l0_sel;
>   	struct combphy_reg pipe_pcie1l1_sel;
> +	struct combphy_reg pipe_sgmii_mac_sel;
>   	struct combphy_reg u3otg0_port_en;
>   	struct combphy_reg u3otg1_port_en;
>   };
> @@ -212,6 +213,8 @@ struct rockchip_combphy_priv {
>   	bool enable_ssc;
>   	bool ext_refclk;
>   	struct clk *refclk;
> +	bool sgmii_mac_sel_present;
> +	u32 sgmii_mac_sel;
>   };
>   
>   static void rockchip_combphy_updatel(struct rockchip_combphy_priv *priv,
> @@ -341,6 +344,7 @@ static struct phy *rockchip_combphy_xlate(struct device *dev, const struct of_ph
>   static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy_priv *priv)
>   {
>   	int i;
> +	int ret;
>   
>   	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
>   	if (priv->num_clks < 1)
> @@ -375,6 +379,16 @@ static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy
>   
>   	priv->ext_refclk = device_property_present(dev, "rockchip,ext-refclk");
>   
> +	if (device_property_present(dev, "rockchip,sgmii-mac-sel")) {
> +		ret = device_property_read_u32(dev, "rockchip,sgmii-mac-sel", &priv->sgmii_mac_sel);
> +		if (ret) {
> +			dev_err(dev, "failed to read sgmii-mac-sel property\n");
> +			return ret;
> +		}
> +

device_property_read_u32() should return non-zero value if it's absent.
How about this:

	struct rockchip_combphy_priv {
		int sgmii_mac_sel;
	}

static int rockchip_combphy_parse_dt:
	u32 val;

         priv->sgmii_mac_sel = -1;
         if (!device_property_read_u32(dev, "rockchip,sgmii-mac-sel", 
&val)) {
                 if (val > 1)
                         return dev_err_probe(dev, -EINVAL,
                                              "invalid sgmii-mac-sel 
%u\n", val);
                 priv->sgmii_mac_sel = val;
         }


static int rk3568_combphy_cfg:
         case PHY_TYPE_SGMII:
                 if (priv->sgmii_mac_sel >= 0)
                         rockchip_combphy_param_write(priv->pipe_grf,
  
&cfg->pipe_sgmii_mac_sel,
  
priv->sgmii_mac_sel > 0);

> +		priv->sgmii_mac_sel_present = true;
> +	}
> +
>   	priv->phy_rst = devm_reset_control_get_exclusive(dev, "phy");
>   	/* fallback to old behaviour */
>   	if (PTR_ERR(priv->phy_rst) == -ENOENT)
> @@ -803,11 +817,34 @@ static const struct rockchip_combphy_cfg rk3562_combphy_cfgs = {
>   	.combphy_cfg	= rk3562_combphy_cfg,
>   };
>   
> +static int rk3568_combphy_select_sgmii_mac(struct rockchip_combphy_priv *priv)
> +{
> +	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
> +
> +	if (!priv->sgmii_mac_sel_present)
> +		return 0;
> +
> +	switch (priv->sgmii_mac_sel) {
> +	case 0:
> +		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_sgmii_mac_sel, false);
> +		break;
> +	case 1:
> +		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_sgmii_mac_sel, true);
> +		break;
> +	default:
> +		dev_err(priv->dev, "invalid sgmii-mac-sel value %u\n", priv->sgmii_mac_sel);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
>   static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv)
>   {
>   	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
>   	unsigned long rate;
>   	u32 val;
> +	int ret;
>   
>   	switch (priv->type) {
>   	case PHY_TYPE_PCIE:
> @@ -873,6 +910,10 @@ static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv)
>   		break;
>   
>   	case PHY_TYPE_SGMII:
> +		ret = rk3568_combphy_select_sgmii_mac(priv);
> +		if (ret)
> +			return ret;
> +
>   		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
>   		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
>   		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
> @@ -984,6 +1025,7 @@ static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = {
>   	.con3_for_sata		= { 0x000c, 15, 0, 0x00, 0x4407 },
>   	/* pipe-grf */
>   	.pipe_con0_for_sata	= { 0x0000, 15, 0, 0x00, 0x2220 },
> +	.pipe_sgmii_mac_sel	= { 0x0040, 1, 1, 0x00, 0x01 },
>   	.pipe_xpcs_phy_ready	= { 0x0040, 2, 2, 0x00, 0x01 },
>   	.u3otg0_port_en		= { 0x0104, 15, 0, 0x0181, 0x1100 },
>   	.u3otg1_port_en		= { 0x0144, 15, 0, 0x0181, 0x1100 },


  reply	other threads:[~2026-10-07  0:58 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-06 16:28 [PATCH v13 0/2] " Coia Prant
2026-10-06 16:28 ` [PATCH v13 1/2] dt-bindings: phy: rockchip: naneng-combphy: add rockchip,sgmii-mac-sel property Coia Prant
2026-10-06 16:28 ` [PATCH v13 2/2] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568 Coia Prant
2026-10-07  0:53   ` Shawn Lin [this message]
2026-10-07  7:27     ` Coia Prant

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ac2a4e80-6d35-457a-bdc5-ee8511198bec@rock-chips.com \
    --to=shawn.lin@rock-chips.com \
    --cc=coiaprant@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mani@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®