From: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
To: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: jic23@kernel.org, nuno.sa@analog.com,
Michael.Hennerich@analog.com, dlechner@baylibre.com,
andy@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, marcelo.schmitt1@gmail.com
Subject: [PATCH v1 1/4] dt-bindings: iio: adc: Add ltc2378
Date: Mon, 18 May 2026 12:21:01 -0300 [thread overview]
Message-ID: <cf404216011b6972519436c63fcc7c4e2c883c54.1779117444.git.marcelo.schmitt1@gmail.com> (raw)
In-Reply-To: <cover.1779117444.git.marcelo.schmitt1@gmail.com>
From: Marcelo Schmitt <marcelo.schmitt@analog.com>
Document how to describe LTC2378-20 and similar ADCs in device tree.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
---
.../bindings/iio/adc/adi,ltc2378.yaml | 131 ++++++++++++++++++
MAINTAINERS | 7 +
2 files changed, 138 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ltc2378.yaml
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ltc2378.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ltc2378.yaml
new file mode 100644
index 000000000000..56e59bcd7306
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ltc2378.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ltc2378.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2378 and similar Analog to Digital Converters
+
+maintainers:
+ - Marcelo Schmitt <marcelo.schmitt@analog.com>
+
+description: |
+ Analog Devices LTC2378 series of ADCs.
+ Specifications can be found at:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/233818fa.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/236416fa.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/236418f.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/236716fa.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/236718f.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/236816f.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/236818f.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/236918fa.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/237016fa.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/237616fa.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/237618fa.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/237620fb.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/237716fa.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/237718fa.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/237720fb.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/237816fa.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/237818fa.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/237820fb.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/237918fb.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/238016fb.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - adi,ltc2338-18
+ - adi,ltc2369-18
+ - adi,ltc2370-16
+ - adi,ltc2379-18
+ - adi,ltc2380-16
+ - items:
+ - enum:
+ - adi,ltc2364-18
+ - adi,ltc2364-16 # fallback compatible
+ - items:
+ - enum:
+ - adi,ltc2367-18
+ - adi,ltc2367-16 # fallback compatible
+ - items:
+ - enum:
+ - adi,ltc2368-18
+ - adi,ltc2368-16 # fallback compatible
+ - items:
+ - enum:
+ - adi,ltc2376-18
+ - adi,ltc2376-20
+ - adi,ltc2376-16 # fallback compatible
+ - items:
+ - enum:
+ - adi,ltc2377-18
+ - adi,ltc2377-20
+ - adi,ltc2377-16 # fallback compatible
+ - items:
+ - enum:
+ - adi,ltc2378-18
+ - adi,ltc2378-20
+ - adi,ltc2378-16 # fallback compatible
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 100000000
+
+ vdd-supply:
+ description: A 2.5V supply that powers the chip (VDD).
+
+ ovdd-supply:
+ description:
+ A 1.71V to 5.25V supply that sets the logic level for digital interface.
+
+ ref-supply:
+ description:
+ A 2.5V to 5.1V supply for the reference input (REF).
+
+ cnv-gpios:
+ description:
+ When provided, this property indicates the GPIO that is connected to the
+ CNV pin.
+ maxItems: 1
+
+ interrupts:
+ description:
+ Interrupt for signaling the completion of conversion results. The active
+ low signal provided on the BUSY pin asserts when ADC conversions finish.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - ovdd-supply
+ - ref-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ adc@0 {
+ compatible = "adi,ltc2378-20";
+ reg = <0>;
+ spi-max-frequency = <71000000>;
+ vdd-supply = <&supply_2_5V>;
+ ovdd-supply = <&supply_3_3V>;
+ ref-supply = <&supply_5V>;
+ cnv-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 0de74503df08..768f56eea476 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15195,6 +15195,13 @@ S: Maintained
F: Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
F: drivers/iio/dac/ltc1660.c
+LTC2378 IIO ADC DRIVER
+M: Marcelo Schmitt <marcelo.schmitt@analog.com>
+L: linux-iio@vger.kernel.org
+S: Supported
+W: https://ez.analog.com/linux-software-drivers
+F: Documentation/devicetree/bindings/iio/adc/adi,ltc2378.yaml
+
LTC2664 IIO DAC DRIVER
M: Michael Hennerich <michael.hennerich@analog.com>
M: Kim Seer Paller <kimseer.paller@analog.com>
--
2.53.0
next prev parent reply other threads:[~2026-05-18 15:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-18 15:20 [PATCH v1 0/4] iio: adc: Add support for LTC2378 and similar ADCs Marcelo Schmitt
2026-05-18 15:21 ` Marcelo Schmitt [this message]
2026-05-18 17:06 ` [PATCH v1 1/4] dt-bindings: iio: adc: Add ltc2378 Conor Dooley
2026-05-18 18:42 ` Marcelo Schmitt
2026-05-18 15:21 ` [PATCH v1 2/4] iio: adc: Add support for LTC2378-20 and similar ADCs Marcelo Schmitt
2026-05-20 16:04 ` Jonathan Cameron
2026-05-18 15:22 ` [PATCH v1 3/4] iio: adc: ltc2378: Enable high-speed data capture Marcelo Schmitt
2026-05-20 16:27 ` Jonathan Cameron
2026-05-20 17:31 ` Marcelo Schmitt
2026-05-20 18:58 ` Jonathan Cameron
2026-05-18 15:22 ` [PATCH v1 4/4] iio: adc: ltc2378: Enable triggered buffer " Marcelo Schmitt
2026-05-20 16:32 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cf404216011b6972519436c63fcc7c4e2c883c54.1779117444.git.marcelo.schmitt1@gmail.com \
--to=marcelo.schmitt1@gmail.com \
--cc=Michael.Hennerich@analog.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®