From: Kang Yang <kang.yang@oss.qualcomm.com>
To: Vitor Soares <ivitro@gmail.com>, Jeff Johnson <jjohnson@kernel.org>
Cc: Vitor Soares <vitor.soares@toradex.com>,
linux-wireless@vger.kernel.org, ath12k@lists.infradead.org,
linux-kernel@vger.kernel.org, baochen.qiang@oss.qualcomm.com
Subject: Re: [PATCH ath-next v3] wifi: ath12k: advertise interface MAC address pool
Date: Tue, 22 Sep 2026 18:34:48 +0800 [thread overview]
Message-ID: <d38ed0b7-c9fe-4958-8abb-ddc7900350ff@oss.qualcomm.com> (raw)
In-Reply-To: <c30b21e218bfb00a1eb3c52ea0b7c9f0dc828592.camel@gmail.com>
On 9/22/2026 5:29 PM, Vitor Soares wrote:
> On Tue, 2026-09-22 at 14:13 +0800, Kang Yang wrote:
>>
>>
>> On 9/22/2026 1:30 AM, Vitor Soares wrote:
>>> From: Vitor Soares <vitor.soares@toradex.com>
>>>
>>> ath12k supports creating vdevs with addresses provided by mac80211.
>>> Userspace can already make concurrent interfaces work by explicitly
>>> assigning different locally administered addresses.
>>>
>>> However, ath12k does not advertise an address list, so when a second
>>> interface is created without an explicit address, mac80211 has nothing
>>> to pick from and falls back to the permanent address. If the first
>>> interface is already running with that address, bringing up the second
>>> one fails with -ENOTUNIQ.
>>>
>>> As in ath11k, provide a list of usable addresses so
>>> ieee80211_assign_perm_addr() can hand each new interface an unused one.
>>> Keep the first entry as the wiphy's permanent MAC address. Generate the
>>> remaining entries as locally administered variants by changing only the
>>> upper nibble of the first octet, which naturally limits the pool to 16
>>> unique addresses.
>>>
>>> The cfg80211 definition of wiphy->addresses does not specify where the
>>> addresses must come from. Some ath12k platforms use it as an interface
>>> MAC address pool, while others use it for firmware-provided per-radio
>>> addresses. Gate the generated address pool behind
>>> advertise_iface_mac_pool and enable it for WCN7850 and QCC2072.
>>>
>>> Other platforms keep the existing behavior.
>>>
>>> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-
>>> QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
>>>
>>
>>
>>
>> I just did test on QCC2072:
>>
>> root@yk-Mayan:/home/yk# sudo iw dev wlo1 interface add wlo2 type station
>> root@yk-Mayan:/home/yk# sudo iw dev wlo1 interface add wlo3 type station
>> phy#0
>> Interface wlo3
>> ifindex 6
>> wdev 0x3
>> addr 22:03:7f:12:be:cd
>> type managed
>>
>> Interface wlo2
>> ifindex 5
>> wdev 0x2
>> addr 12:03:7f:12:be:cd
>> type managed
>>
>> Interface wlo1
>> ifindex 4
>> wdev 0x1
>> addr 00:03:7f:12:be:cd
>> type managed
>>
>>
>>
>>
>> Tested-on: QCC2072 hw1.0 PCI
>> WLAN.COL.1.0.c2-00074-QCACOLSWPL_V1_TO_SILICONZ-1
>>
>
> Thanks for testing this on QCC2072.
>
> I've added the QCC2072 Tested-on line for v4. Could you reply with your Tested-
> by so I can pick it up?
>
Tested-by: Kang Yang <kang.yang@oss.qualcomm.com>
>
> Best regards,
> Vitor
next prev parent reply other threads:[~2026-09-22 10:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-21 17:30 Vitor Soares
2026-09-22 6:13 ` Kang Yang
2026-09-22 9:29 ` Vitor Soares
2026-09-22 10:34 ` Kang Yang [this message]
2026-09-22 6:47 ` Baochen Qiang
2026-09-23 8:50 ` Baochen Qiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d38ed0b7-c9fe-4958-8abb-ddc7900350ff@oss.qualcomm.com \
--to=kang.yang@oss.qualcomm.com \
--cc=ath12k@lists.infradead.org \
--cc=baochen.qiang@oss.qualcomm.com \
--cc=ivitro@gmail.com \
--cc=jjohnson@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=vitor.soares@toradex.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®