From: Mario Limonciello <superm1@kernel.org>
To: Olzhas <marat.olzhasss@gmail.com>,
"mario.limonciello@amd.com" <mario.limonciello@amd.com>,
linusw@kernel.org
Cc: linux-gpio@vger.kernel.org, regressions@lists.linux.dev,
stable@vger.kernel.org, linux-kernel@vger.kernel.org,
sashal@kernel.org
Subject: Re: [REGRESSION] pinctrl-amd: Don't clear S4 wake bits at probe causes power off to reboot AMD Ryzen laptop
Date: Sun, 20 Sep 2026 12:05:45 -0500 [thread overview]
Message-ID: <de1b64ff-ee8c-4b76-aae8-ca29628b2db1@kernel.org> (raw)
In-Reply-To: <CANzgjV0YWUX6=ZGTbn4KEKqQmVhsZTsDPeRf0Nfq=YFT1eoPzA@mail.gmail.com>
On 9/20/26 12:00 PM, Olzhas wrote:
> Hi Mario,
>
> I am experiencing a regression on my laptop where attempting to power
> off the machine results in an immediate reboot instead of a shutdown.
>
> The last known good kernel is v7.1.7, while v7.1.8 is the first known
> bad release.
>
> I bisected the regression across 9 kernel builds and identified the
> following commit as the first bad commit:
>
> a7c855969b1a ("pinctrl-amd: Don't clear S4 wake bits at probe")
>
> With this commit present, running:
>
> systemctl poweroff
>
> causes the laptop to power off and then immediately power back on.
>
> I reverted this specific commit on top of v7.3.0-rc3 and the issue is
> completely resolved. The laptop now powers off correctly and remains
> off.
>
> Hardware:
> - Laptop: Chuwi CoreBook Plus 16
> - DMI board vendor: Default string
> - DMI board name: Default string
> - DMI BIOS version: AB8139_S_2C_V00.01_007
> - DMI BIOS date: 2025-08-05
> - CPU reported by the system: AMD Ryzen 5 7430U with Radeon Graphics
> - The CPU/hardware appears to correspond to Ryzen 5 5500U / Lucienne
> silicon, although I am not certain whether this is relevant.
>
> Software:
> - Distribution: Arch Linux
> - Last known good: v7.1.7
> - First known bad: v7.1.8
> - Current test kernel: v7.3.0-rc3 with a7c855969b1a reverted
>
> I have verified the fix by booting the reverted kernel and testing
> poweroff successfully.
>
> Since the DMI board strings are generic ("Default string"), I would be
> happy to provide an ACPI dump, dmesg output, kernel configuration,
> bisect log, or perform additional testing if needed.
>
> I suspect this may be related to an S4 wake source left enabled by the
> firmware, but I have not identified the exact wake source yet.
>
> Best regards,
> Olzhas Marat
>
> #regzbot introduced: a7c855969b1a
>
This is most likely a BIOS bug, but we need to dig into the details to
understand more and decide what to do. It could also be a driver bug,
most likely in a WLAN driver.
Can you please open a kernel bugzilla with the following information:
1) /sys/kernel/debug/gpio without the commit
2) /sys/kernel/debug/gpio with the commit
3) acpidump (just once)
4) amd-s2idle report (this will capture and associate some information
that will make this easier to triage)
Please CC me into the bug report.
Thanks
next prev parent reply other threads:[~2026-09-20 17:05 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-20 17:00 Olzhas
2026-09-20 17:05 ` Mario Limonciello [this message]
2026-09-21 13:45 ` Mario Limonciello
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=de1b64ff-ee8c-4b76-aae8-ca29628b2db1@kernel.org \
--to=superm1@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marat.olzhasss@gmail.com \
--cc=mario.limonciello@amd.com \
--cc=regressions@lists.linux.dev \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®