From: Laurent Vivier <laurent@vivier.eu>
To: Finn Thain <fthain@linux-m68k.org>, Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>,
Joshua Thompson <funaho@jurai.org>,
linux-block@vger.kernel.org, linux-m68k@lists.linux-m68k.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 09/31] swim: Recalibrate when drive is probed
Date: Mon, 20 Jul 2026 21:12:16 +0200 [thread overview]
Message-ID: <dea3f394-7640-4554-bd0a-0d9cd50e4fea@vivier.eu> (raw)
In-Reply-To: <c6a525e6f5bf4cf93c69535a68be842a95b902db.1784196135.git.fthain@linux-m68k.org>
Le 16/07/2026 à 12:02, Finn Thain a écrit :
> Track zero recalibration can be slow and is normally done only once i.e.
> during system POST or boot-up. Recalibrate once after the drive is probed
> rather than every time the device is opened. Don't register the drive if
> recalibration fails. Move the heads to the edge of the disk before
> ejecting so that recalibration happens quickly.
>
> Fixes: 8852ecd97488 ("m68k: mac - Add SWIM floppy support")
> Signed-off-by: Finn Thain <fthain@linux-m68k.org>
> ---
> drivers/block/swim.c | 15 +++++----------
> 1 file changed, 5 insertions(+), 10 deletions(-)
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
>
> diff --git a/drivers/block/swim.c b/drivers/block/swim.c
> index 03a89916d4ed..76f6cfa68432 100644
> --- a/drivers/block/swim.c
> +++ b/drivers/block/swim.c
> @@ -412,6 +412,7 @@ static inline int swim_track00(struct swim __iomem *base)
> if (swim_readbit(base, TRACK_ZERO))
> return 0;
>
> + pr_err("swim: track zero recalibration failed\n");
> return -1;
> }
>
> @@ -456,6 +457,7 @@ static int floppy_eject(struct floppy_state *fs)
> struct swim __iomem *base = fs->swd->base;
>
> swim_drive(base, fs->location);
> + swim_track(fs, 1);
> swim_motor(base, OFF);
> swim_eject(base);
> swim_drive(base, NO_DRIVE);
> @@ -596,13 +598,6 @@ static void setup_medium(struct floppy_state *fs)
> struct floppy_struct *g;
> fs->disk_in = 1;
> fs->write_protected = swim_readbit(base, WRITE_PROT);
> -
> - if (swim_track00(base))
> - printk(KERN_ERR
> - "SWIM: cannot move floppy head to track 0\n");
> -
> - swim_track00(base);
> -
> fs->type = swim_readbit(base, TWOMEG_MEDIA) ?
> HD_MEDIA : DD_MEDIA;
> fs->head_number = swim_readbit(base, SINGLE_SIDED) ? 1 : 2;
> @@ -610,7 +605,6 @@ static void setup_medium(struct floppy_state *fs)
> fs->total_secs = g->size;
> fs->secpercyl = g->head * g->sect;
> fs->secpertrack = g->sect;
> - fs->track = 0;
> } else {
> fs->disk_in = 0;
> }
> @@ -773,6 +767,7 @@ static int swim_add_floppy(struct swim_priv *swd, enum drive_location location)
>
> fs->ref_count = 0;
> fs->ejected = 1;
> + fs->track = 0;
>
> swd->floppy_count++;
>
> @@ -827,11 +822,11 @@ static int swim_floppy_init(struct platform_device *pdev)
>
> swim_drive(base, INTERNAL_DRIVE);
> if (swim_readbit(base, DRIVE_PRESENT) &&
> - !swim_readbit(base, ONEMEG_DRIVE))
> + !swim_readbit(base, ONEMEG_DRIVE) && !swim_track00(base))
> swim_add_floppy(swd, INTERNAL_DRIVE);
> swim_drive(base, EXTERNAL_DRIVE);
> if (swim_readbit(base, DRIVE_PRESENT) &&
> - !swim_readbit(base, ONEMEG_DRIVE))
> + !swim_readbit(base, ONEMEG_DRIVE) && !swim_track00(base))
> swim_add_floppy(swd, EXTERNAL_DRIVE);
> swim_drive(base, NO_DRIVE);
>
next prev parent reply other threads:[~2026-07-20 19:12 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-16 10:02 [PATCH 00/31] block/swim: Fixes and improvements Finn Thain
2026-07-16 10:02 ` [PATCH 01/31] swim: Assert strobe with stable outputs Finn Thain
2026-07-20 13:22 ` Laurent Vivier
2026-07-21 5:41 ` Finn Thain
2026-07-21 6:23 ` Laurent Vivier
2026-07-21 7:37 ` Finn Thain
2026-07-21 7:48 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 11/31] swim: Handle FIFO timeout error Finn Thain
2026-07-20 19:17 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 10/31] swim: Add track zero recalibration delay Finn Thain
2026-07-20 19:14 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 25/31] swim: Move swd initialization Finn Thain
2026-07-26 15:40 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 05/31] swim: Perform ISM/IWM mode switching according to specs Finn Thain
2026-07-20 18:20 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 28/31] swim: Clean up whitespace Finn Thain
2026-07-26 15:45 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 23/31] swim: Don't needlessly re-read sectors Finn Thain
2026-07-26 16:01 ` Laurent Vivier
2026-07-27 0:30 ` Finn Thain
2026-07-16 10:02 ` [PATCH 22/31] swim: Remove pointless mode0 register write Finn Thain
2026-07-26 14:51 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 06/31] swim: Configure parameter memory Finn Thain
2026-07-20 18:31 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 16/31] swim: Fix buffer overflow Finn Thain
2026-07-21 5:59 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 04/31] swim: Don't disable drive after every sector Finn Thain
2026-07-20 18:10 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 09/31] swim: Recalibrate when drive is probed Finn Thain
2026-07-20 19:12 ` Laurent Vivier [this message]
2026-07-16 10:02 ` [PATCH 30/31] swim: Define symbols for constants Finn Thain
2026-07-26 15:47 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 19/31] swim: Deduplicate polling loops Finn Thain
2026-07-26 14:43 ` Laurent Vivier
2026-07-27 0:19 ` Finn Thain
2026-07-16 10:02 ` [PATCH 31/31] swim: Unexport global symbols Finn Thain
2026-07-26 15:51 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 14/31] swim: Check error register during sector read Finn Thain
2026-07-21 5:43 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 13/31] swim: Check for CRC errors Finn Thain
2026-07-20 19:37 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 08/31] swim: Don't start motor until medium is present Finn Thain
2026-07-20 19:02 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 29/31] swim: Define macros for constants Finn Thain
2026-07-26 15:46 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 21/31] swim: Revisit delays Finn Thain
2026-07-26 14:50 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 15/31] swim: Don't use the mark register to read data Finn Thain
2026-07-21 5:49 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 12/31] swim: Simplify return value initialization Finn Thain
2026-07-20 19:21 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 26/31] swim: Add some helpful references Finn Thain
2026-07-26 15:41 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 03/31] swim: Enable the drive when probing Finn Thain
2026-07-20 18:08 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 17/31] swim: Convert to blocking queue Finn Thain
2026-07-21 6:03 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 24/31] swim: Remove pointless specifiers Finn Thain
2026-07-26 15:38 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 07/31] swim: Enable clock divider only where appropriate Finn Thain
2026-07-20 18:49 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 20/31] swim: Check drive ready bit Finn Thain
2026-07-26 14:48 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 02/31] swim: Select appropriate drive once only Finn Thain
2026-07-20 13:27 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 27/31] swim: Remove unused macro definitions Finn Thain
2026-07-26 15:43 ` Laurent Vivier
2026-07-16 10:02 ` [PATCH 18/31] swim: Remove redundant RELAX actions Finn Thain
2026-07-21 6:10 ` Laurent Vivier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dea3f394-7640-4554-bd0a-0d9cd50e4fea@vivier.eu \
--to=laurent@vivier.eu \
--cc=axboe@kernel.dk \
--cc=fthain@linux-m68k.org \
--cc=funaho@jurai.org \
--cc=geert@linux-m68k.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®