From: Shuai Xue <xueshuai@linux.alibaba.com>
To: Nathan Chancellor <nathan@kernel.org>,
"Rafael J. Wysocki" <rafael@kernel.org>
Cc: helgaas@kernel.org, bp@alien8.de, tony.luck@intel.com,
james.morse@arm.com, lenb@kernel.org, rjw@rjwysocki.net,
bhelgaas@google.com, zhangliguang@linux.alibaba.com,
zhuo.song@linux.alibaba.com, linux-kernel@vger.kernel.org,
linux-acpi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-pci@vger.kernel.org
Subject: Re: [PATCH v7 1/2] ACPI: APEI: explicit init HEST and GHES in apci_init
Date: Tue, 22 Feb 2022 14:03:30 +0800 [thread overview]
Message-ID: <dfa2c9ca-cb5a-a067-65c4-6f6588bed095@linux.alibaba.com> (raw)
In-Reply-To: <YhPXX+CSoK++9MP6@dev-arch.archlinux-ax161>
Hi, Nathan and Rafael,
在 2022/2/22 AM2:18, Nathan Chancellor 写道:
> Hi Shuai,
>
> On Sat, Jan 22, 2022 at 01:26:17PM +0800, Shuai Xue wrote:
>> From commit e147133a42cb ("ACPI / APEI: Make hest.c manage the estatus
>> memory pool") was merged, ghes_init() relies on acpi_hest_init() to manage
>> the estatus memory pool. On the other hand, ghes_init() relies on
>> sdei_init() to detect the SDEI version and (un)register events. The
>> dependencies are as follows:
>>
>> ghes_init() => acpi_hest_init() => acpi_bus_init() => acpi_init()
>> ghes_init() => sdei_init()
>>
>> HEST is not PCI-specific and initcall ordering is implicit and not
>> well-defined within a level.
>>
>> Based on above, remove acpi_hest_init() from acpi_pci_root_init() and
>> convert ghes_init() and sdei_init() from initcalls to explicit calls in the
>> following order:
>>
>> acpi_hest_init()
>> ghes_init()
>> sdei_init()
>>
>> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
>> ---
>> drivers/acpi/apei/ghes.c | 19 ++++++++-----------
>> drivers/acpi/bus.c | 2 ++
>> drivers/acpi/pci_root.c | 3 ---
>> drivers/firmware/Kconfig | 1 +
>> drivers/firmware/arm_sdei.c | 13 ++-----------
>> include/acpi/apei.h | 4 +++-
>> include/linux/arm_sdei.h | 2 ++
>> 7 files changed, 18 insertions(+), 26 deletions(-)
>>
>> diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
>> index 0c5c9acc6254..aadc0a972f18 100644
>> --- a/drivers/acpi/apei/ghes.c
>> +++ b/drivers/acpi/apei/ghes.c
>> @@ -1457,33 +1457,35 @@ static struct platform_driver ghes_platform_driver = {
>> .remove = ghes_remove,
>> };
>>
>> -static int __init ghes_init(void)
>> +void __init ghes_init(void)
>> {
>> int rc;
>>
>> + sdei_init();
>> +
>> if (acpi_disabled)
>> - return -ENODEV;
>> + return;
>>
>> switch (hest_disable) {
>> case HEST_NOT_FOUND:
>> - return -ENODEV;
>> + return;
>> case HEST_DISABLED:
>> pr_info(GHES_PFX "HEST is not enabled!\n");
>> - return -EINVAL;
>> + return;
>> default:
>> break;
>> }
>>
>> if (ghes_disable) {
>> pr_info(GHES_PFX "GHES is not enabled!\n");
>> - return -EINVAL;
>> + return;
>> }
>>
>> ghes_nmi_init_cxt();
>>
>> rc = platform_driver_register(&ghes_platform_driver);
>> if (rc)
>> - goto err;
>> + return;
>>
>> rc = apei_osc_setup();
>> if (rc == 0 && osc_sb_apei_support_acked)
>> @@ -1494,9 +1496,4 @@ static int __init ghes_init(void)
>> pr_info(GHES_PFX "APEI firmware first mode is enabled by APEI bit.\n");
>> else
>> pr_info(GHES_PFX "Failed to enable APEI firmware first mode.\n");
>> -
>> - return 0;
>> -err:
>> - return rc;
>> }
>> -device_initcall(ghes_init);
>> diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
>> index 07f604832fd6..3f403db20f69 100644
>> --- a/drivers/acpi/bus.c
>> +++ b/drivers/acpi/bus.c
>> @@ -1331,6 +1331,8 @@ static int __init acpi_init(void)
>>
>> pci_mmcfg_late_init();
>> acpi_iort_init();
>> + acpi_hest_init();
>> + ghes_init();
>> acpi_scan_init();
>> acpi_ec_init();
>> acpi_debugfs_init();
>> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
>> index b76db99cced3..6f9e75d14808 100644
>> --- a/drivers/acpi/pci_root.c
>> +++ b/drivers/acpi/pci_root.c
>> @@ -22,8 +22,6 @@
>> #include <linux/slab.h>
>> #include <linux/dmi.h>
>> #include <linux/platform_data/x86/apple.h>
>> -#include <acpi/apei.h> /* for acpi_hest_init() */
>> -
>> #include "internal.h"
>>
>> #define ACPI_PCI_ROOT_CLASS "pci_bridge"
>> @@ -943,7 +941,6 @@ struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
>>
>> void __init acpi_pci_root_init(void)
>> {
>> - acpi_hest_init();
>> if (acpi_pci_disabled)
>> return;
>>
>> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
>> index 75cb91055c17..ad114d9cdf8e 100644
>> --- a/drivers/firmware/Kconfig
>> +++ b/drivers/firmware/Kconfig
>> @@ -40,6 +40,7 @@ config ARM_SCPI_POWER_DOMAIN
>> config ARM_SDE_INTERFACE
>> bool "ARM Software Delegated Exception Interface (SDEI)"
>> depends on ARM64
>> + select ACPI_APEI_GHES
>
> As the kernel test robot pointed out [1], you cannot do this.
> CONFIG_ACPI_APEI_GHES is a user selectable symbol that has dependencies,
> which 'select' completely overrides, resulting in build failures when
> CONFIG_ACPI_APEI is not enabled.
>
> If CONFIG_ARM_SDE_INTERFACE truly requires CONFIG_ACPI_APEI_GHES, you
> should have "depends on ACPI_APEI_GHES".
>
> If CONFIG_ARM_SDE_INTERFACE soft depends on CONFIG_ACPI_APEI_GHES for
> functionality but can work without it, you could use
> "imply ACPI_APEI_GHES", which will enable CONFIG_ACPI_APEI_GHES if its
> dependencies are met.
>
> I noticed the same error with Alpine Linux's aarch64 configuration [2]
> if you wanted a quick configuration to test with.
>
> [1]: https://lore.kernel.org/r/202202151504.jWpZGPaH-lkp@intel.com/
> [2]: https://git.alpinelinux.org/aports/plain/community/linux-edge/config-edge.aarch64
Thank you for explaining the difference among 'select', 'depends on' and 'imply'.
I was wrong to use 'select'. sdei_init() is called in ghes_init() now, in other words,
CONFIG_ARM_SDE_INTERFACE truly requires CONFIG_ACPI_APEI_GHES, so we should use
'depends on'. I will send a new patch set to fix this problem.
Best Regards,
Shuai
next prev parent reply other threads:[~2022-02-22 6:03 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-26 7:04 [RFC PATCH v4] ACPI: Move sdei_init and ghes_init ahead to handle platform errors earlier Shuai Xue
2021-12-02 12:50 ` Shuai Xue
2021-12-16 13:34 ` [RESEND " Shuai Xue
2021-12-17 18:17 ` Rafael J. Wysocki
2021-12-19 4:04 ` Shuai Xue
2021-12-21 23:17 ` Bjorn Helgaas
2021-12-23 8:11 ` Shuai Xue
2021-12-24 0:17 ` Bjorn Helgaas
2021-12-24 8:55 ` Shuai Xue
2022-01-13 13:38 ` Shuai Xue
2022-01-16 8:43 ` [PATCH v5] " Shuai Xue
2022-01-18 22:49 ` Bjorn Helgaas
2022-01-19 6:40 ` Shuai Xue
2022-01-19 20:42 ` Bjorn Helgaas
2022-01-20 2:40 ` Shuai Xue
2022-01-20 16:24 ` Rafael J. Wysocki
2022-01-20 5:05 ` [PATCH v6] ACPI: explicit init HEST, SDEI and GHES in apci_init Shuai Xue
2022-01-20 16:22 ` Bjorn Helgaas
2022-01-21 3:43 ` Shuai Xue
2022-01-21 19:46 ` Bjorn Helgaas
2022-01-22 5:26 ` [PATCH v7 1/2] ACPI: APEI: explicit init HEST " Shuai Xue
2022-02-10 9:39 ` Shuai Xue
2022-02-14 18:51 ` Rafael J. Wysocki
2022-02-21 18:18 ` Nathan Chancellor
2022-02-21 18:25 ` Rafael J. Wysocki
2022-02-22 6:03 ` Shuai Xue [this message]
2022-01-22 5:26 ` [PATCH v7 2/2] ACPI: APEI: rename ghes_init with an "acpi_" prefix Shuai Xue
2022-02-27 12:25 ` [PATCH v8 1/2] ACPI: APEI: explicit init HEST and GHES in apci_init Shuai Xue
2022-03-03 19:27 ` Rafael J. Wysocki
2022-02-27 12:25 ` [PATCH v8 2/2] ACPI: APEI: rename ghes_init with an "acpi_" prefix Shuai Xue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dfa2c9ca-cb5a-a067-65c4-6f6588bed095@linux.alibaba.com \
--to=xueshuai@linux.alibaba.com \
--cc=bhelgaas@google.com \
--cc=bp@alien8.de \
--cc=helgaas@kernel.org \
--cc=james.morse@arm.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=nathan@kernel.org \
--cc=rafael@kernel.org \
--cc=rjw@rjwysocki.net \
--cc=tony.luck@intel.com \
--cc=zhangliguang@linux.alibaba.com \
--cc=zhuo.song@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®