From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: "James E.J. Bottomley" <James.Bottomley@suse.de>,
Andrew Vasquez <andrew.vasquez@qlogic.com>,
linux-driver@qlogic.com, linux-scsi@vger.kernel.org
Subject: [PATCH 7/9] drivers/scsi: Fix continuation lines
Date: Fri, 26 Mar 2010 19:27:56 -0700 [thread overview]
Message-ID: <f5bb022bd07fa7fef29c9c4cebae250f7bf7a059.1269655922.git.joe@perches.com> (raw)
In-Reply-To: <cover.1269655208.git.joe@perches.com>
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/scsi/arcmsr/arcmsr_hba.c | 50 +++++++++++++++++++-------------------
drivers/scsi/qla2xxx/qla_attr.c | 18 +++++++-------
drivers/scsi/qla2xxx/qla_os.c | 6 ++--
3 files changed, 37 insertions(+), 37 deletions(-)
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 47d5d19..07a9fd6 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -585,8 +585,8 @@ static void arcmsr_flush_hba_cache(struct AdapterControlBlock *acb)
break;
else {
retry_count--;
- printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \
- timeout, retry count down = %d \n", acb->host->host_no, retry_count);
+ printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' "
+ "timeout, retry count down = %d\n", acb->host->host_no, retry_count);
}
} while (retry_count != 0);
}
@@ -602,8 +602,8 @@ static void arcmsr_flush_hbb_cache(struct AdapterControlBlock *acb)
break;
else {
retry_count--;
- printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \
- timeout,retry count down = %d \n", acb->host->host_no, retry_count);
+ printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' "
+ "timeout,retry count down = %d\n", acb->host->host_no, retry_count);
}
} while (retry_count != 0);
}
@@ -732,14 +732,14 @@ static void arcmsr_drain_donequeue(struct AdapterControlBlock *acb, uint32_t fla
if (abortcmd) {
abortcmd->result |= DID_ABORT << 16;
arcmsr_ccb_complete(ccb, 1);
- printk(KERN_NOTICE "arcmsr%d: ccb ='0x%p' \
- isr got aborted command \n", acb->host->host_no, ccb);
+ printk(KERN_NOTICE "arcmsr%d: ccb ='0x%p' "
+ "isr got aborted command\n", acb->host->host_no, ccb);
}
}
- printk(KERN_NOTICE "arcmsr%d: isr get an illegal ccb command \
- done acb = '0x%p'"
- "ccb = '0x%p' ccbacb = '0x%p' startdone = 0x%x"
- " ccboutstandingcount = %d \n"
+ printk(KERN_NOTICE "arcmsr%d: isr get an illegal ccb command "
+ "done acb = '0x%p' "
+ "ccb = '0x%p' ccbacb = '0x%p' startdone = 0x%x "
+ "ccboutstandingcount = %d\n"
, acb->host->host_no
, acb
, ccb
@@ -1709,8 +1709,8 @@ static void arcmsr_get_hba_config(struct AdapterControlBlock *acb)
writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0);
if (arcmsr_hba_wait_msgint_ready(acb)) {
- printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \
- miscellaneous data' timeout \n", acb->host->host_no);
+ printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware "
+ "miscellaneous data' timeout\n", acb->host->host_no);
}
count = 8;
@@ -1753,8 +1753,8 @@ static void arcmsr_get_hbb_config(struct AdapterControlBlock *acb)
writel(ARCMSR_MESSAGE_GET_CONFIG, reg->drv2iop_doorbell_reg);
if (arcmsr_hbb_wait_msgint_ready(acb)) {
- printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \
- miscellaneous data' timeout \n", acb->host->host_no);
+ printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware "
+ "miscellaneous data' timeout\n", acb->host->host_no);
}
count = 8;
@@ -1889,8 +1889,8 @@ static void arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb,
poll_ccb_done = (ccb == poll_ccb) ? 1:0;
if ((ccb->acb != acb) || (ccb->startdone != ARCMSR_CCB_START)) {
if ((ccb->startdone == ARCMSR_CCB_ABORTED) || (ccb == poll_ccb)) {
- printk(KERN_NOTICE "arcmsr%d: \
- scsi id = %d lun = %d ccb = '0x%p' poll command abort successfully \n"
+ printk(KERN_NOTICE "arcmsr%d: "
+ "scsi id = %d lun = %d ccb = '0x%p' poll command abort successfully\n"
,acb->host->host_no
,ccb->pcmd->device->id
,ccb->pcmd->device->lun
@@ -1958,8 +1958,8 @@ static int arcmsr_iop_confirm(struct AdapterControlBlock *acb)
writel(ARCMSR_INBOUND_MESG0_SET_CONFIG, \
®->inbound_msgaddr0);
if (arcmsr_hba_wait_msgint_ready(acb)) {
- printk(KERN_NOTICE "arcmsr%d: ""set ccb high \
- part physical address timeout\n",
+ printk(KERN_NOTICE "arcmsr%d: set ccb high "
+ "part physical address timeout\n",
acb->host->host_no);
return 1;
}
@@ -1999,14 +1999,14 @@ static int arcmsr_iop_confirm(struct AdapterControlBlock *acb)
writel(ARCMSR_MESSAGE_SET_CONFIG, reg->drv2iop_doorbell_reg);
if (arcmsr_hbb_wait_msgint_ready(acb)) {
- printk(KERN_NOTICE "arcmsr%d: 'set command Q window' \
- timeout \n",acb->host->host_no);
+ printk(KERN_NOTICE "arcmsr%d: 'set command Q window' "
+ "timeout\n",acb->host->host_no);
return 1;
}
writel(ARCMSR_MESSAGE_START_DRIVER_MODE, reg->drv2iop_doorbell_reg);
if (arcmsr_hbb_wait_msgint_ready(acb)) {
- printk(KERN_NOTICE "arcmsr%d: 'can not set diver mode \n"\
+ printk(KERN_NOTICE "arcmsr%d: 'can not set diver mode\n"
,acb->host->host_no);
return 1;
}
@@ -2048,8 +2048,8 @@ static void arcmsr_start_hba_bgrb(struct AdapterControlBlock *acb)
acb->acb_flags |= ACB_F_MSG_START_BGRB;
writel(ARCMSR_INBOUND_MESG0_START_BGRB, ®->inbound_msgaddr0);
if (arcmsr_hba_wait_msgint_ready(acb)) {
- printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \
- rebulid' timeout \n", acb->host->host_no);
+ printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background "
+ "rebuild' timeout\n", acb->host->host_no);
}
}
@@ -2059,8 +2059,8 @@ static void arcmsr_start_hbb_bgrb(struct AdapterControlBlock *acb)
acb->acb_flags |= ACB_F_MSG_START_BGRB;
writel(ARCMSR_MESSAGE_START_BGRB, reg->drv2iop_doorbell_reg);
if (arcmsr_hbb_wait_msgint_ready(acb)) {
- printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \
- rebulid' timeout \n",acb->host->host_no);
+ printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background "
+ "rebuild' timeout\n",acb->host->host_no);
}
}
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 90d1e06..ea87ea7 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1946,9 +1946,9 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job)
(rsp_sg_cnt != bsg_job->reply_payload.sg_cnt))
{
DEBUG2(printk(KERN_INFO
- "dma mapping resulted in different sg counts \
- [request_sg_cnt: %x dma_request_sg_cnt: %x\
- reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
+ "dma mapping resulted in different sg counts "
+ "[request_sg_cnt: %x dma_request_sg_cnt: %x "
+ "reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
bsg_job->request_payload.sg_cnt, req_sg_cnt,
bsg_job->reply_payload.sg_cnt, rsp_sg_cnt));
rval = -EAGAIN;
@@ -2040,9 +2040,9 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job)
(rsp_sg_cnt != bsg_job->reply_payload.sg_cnt))
{
DEBUG2(qla_printk(KERN_WARNING, ha,
- "dma mapping resulted in different sg counts \
- [request_sg_cnt: %x dma_request_sg_cnt: %x\
- reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
+ "dma mapping resulted in different sg counts "
+ "[request_sg_cnt: %x dma_request_sg_cnt: %x "
+ "reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
bsg_job->request_payload.sg_cnt, req_sg_cnt,
bsg_job->reply_payload.sg_cnt, rsp_sg_cnt));
rval = -EAGAIN;
@@ -2184,9 +2184,9 @@ qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job)
(elreq.rsp_sg_cnt != bsg_job->reply_payload.sg_cnt))
{
DEBUG2(printk(KERN_INFO
- "dma mapping resulted in different sg counts \
- [request_sg_cnt: %x dma_request_sg_cnt: %x\
- reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
+ "dma mapping resulted in different sg counts "
+ "[request_sg_cnt: %x dma_request_sg_cnt: %x "
+ "reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n",
bsg_job->request_payload.sg_cnt, elreq.req_sg_cnt,
bsg_job->reply_payload.sg_cnt, elreq.rsp_sg_cnt));
rval = -EAGAIN;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 46720b2..eccbff3 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -87,9 +87,9 @@ MODULE_PARM_DESC(ql2xiidmaenable,
int ql2xmaxqueues = 1;
module_param(ql2xmaxqueues, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xmaxqueues,
- "Enables MQ settings "
- "Default is 1 for single queue. Set it to number \
- of queues in MQ mode.");
+ "Enables MQ settings "
+ "Default is 1 for single queue. "
+ "Set it to number of queues in MQ mode.");
int ql2xmultique_tag;
module_param(ql2xmultique_tag, int, S_IRUGO|S_IRUSR);
--
1.7.0.14.g7e948
next prev parent reply other threads:[~2010-03-27 2:28 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-27 2:27 [PATCH 0/9] Continuation line fixes Joe Perches
2010-03-27 2:27 ` [PATCH 1/9] arch/arm: Fix continuation lines Joe Perches
2010-04-12 19:47 ` Russell King - ARM Linux
2010-04-12 20:00 ` [PATCH] MAINTAINERS: arch/arm/s3c and arch/arm/s5p Joe Perches
2010-04-12 23:53 ` Kyungmin Park
2010-04-13 2:47 ` Joe Perches
[not found] ` <p2y9c9fda241004161243p924e06f0rb1ff64d5ae258819@mail.gmail.com>
2010-05-04 0:46 ` Ben Dooks
2010-05-04 2:17 ` Kyungmin Park
2010-05-09 23:03 ` Kukjin Kim
2010-03-27 2:27 ` [PATCH 2/9] arch/blackfin: Fix continuation lines Joe Perches
2010-03-27 5:13 ` [Uclinux-dist-devel] " Mike Frysinger
2010-03-27 2:27 ` [PATCH 3/9] drivers/infiniband: " Joe Perches
2010-03-27 2:27 ` [PATCH 4/9] drivers/media: " Joe Perches
2010-03-27 2:27 ` [PATCH 5/9] drivers/message: " Joe Perches
2010-03-27 2:27 ` [PATCH 6/9] drivers/net: " Joe Perches
2010-03-27 15:34 ` David Miller
2010-03-27 2:27 ` Joe Perches [this message]
2010-03-27 2:27 ` [PATCH 8/9] drivers/serial: " Joe Perches
2010-03-27 5:12 ` [Uclinux-dist-devel] " Mike Frysinger
2010-03-27 2:27 ` [PATCH 9/9] mm: " Joe Perches
2010-03-28 17:10 ` Pekka Enberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f5bb022bd07fa7fef29c9c4cebae250f7bf7a059.1269655922.git.joe@perches.com \
--to=joe@perches.com \
--cc=James.Bottomley@suse.de \
--cc=andrew.vasquez@qlogic.com \
--cc=linux-driver@qlogic.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®