[PATCH 0/3] baisc devicetree support for Amlogic A9

[PATCH 0/3] baisc devicetree support for Amlogic A9

[Xianwei Zhao via B4 Relay]

Add the new A9 SoC/board device tree and related bindings.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
Xianwei Zhao (3):
      dt-bindings: arm: amlogic: add A311Y3 support
      dt-bindings: serial: amlogic,meson-uart: Add compatible string for A9
      arm64: dts: add support for A9 based Amlogic BY401

 Documentation/devicetree/bindings/arm/amlogic.yaml |   6 +
 .../bindings/serial/amlogic,meson-uart.yaml        |   1 +
 arch/arm64/boot/dts/amlogic/Makefile               |   1 +
 .../boot/dts/amlogic/amlogic-a9-a311y3-by401.dts   |  41 +++++++
 arch/arm64/boot/dts/amlogic/amlogic-a9.dtsi        | 127 +++++++++++++++++++++
 5 files changed, 176 insertions(+)
---
base-commit: e3194dfb772304a1b7ca3bcfccacefec3468b7bf
change-id: 20260205-a9-baisc-dts-cbbbe2e01f80

Best regards,
-- 
Xianwei Zhao <xianwei.zhao@amlogic.com>



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 1/3] dt-bindings: arm: amlogic: add A311Y3 support

[Xianwei Zhao via B4 Relay]

From: Xianwei Zhao <xianwei.zhao@amlogic.com>

Add bindings for the Amlogic BY401 board, using A311Y3 Soc from
Amlogic A9 family chip.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
 Documentation/devicetree/bindings/arm/amlogic.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index a885278bc4e2..9f73a0054fb2 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -234,6 +234,12 @@ properties:
               - amlogic,av400
           - const: amlogic,a5
 
+      - description: Boards with the Amlogic A9 A311Y3 SoC
+        items:
+          - enum:
+              - amlogic,by401
+          - const: amlogic,a9
+
       - description: Boards with the Amlogic C3 C302X/C308L SoC
         items:
           - enum:

-- 
2.52.0



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 2/3] dt-bindings: serial: amlogic,meson-uart: Add compatible string for A9

[Xianwei Zhao via B4 Relay]

From: Xianwei Zhao <xianwei.zhao@amlogic.com>

Amlogic A9 SoCs uses the same UART controller as S4 SoCs.
There is no need for an extra compatible line in the driver,
but add A9 compatible line for documentation.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
 Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index d8ad1bb6172d..a2702319685d 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -56,6 +56,7 @@ properties:
         items:
           - enum:
               - amlogic,a4-uart
+              - amlogic,a9-uart
               - amlogic,s6-uart
               - amlogic,s7-uart
               - amlogic,s7d-uart

-- 
2.52.0



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 3/3] arm64: dts: add support for A9 based Amlogic BY401

[Xianwei Zhao via B4 Relay]

From: Xianwei Zhao <xianwei.zhao@amlogic.com>

Add basic support for the A9 based Amlogic BY401 board, which describes
the following components: CPU, GIC, IRQ, Timer and UART.
These are capable of booting up into the serial console.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/Makefile               |   1 +
 .../boot/dts/amlogic/amlogic-a9-a311y3-by401.dts   |  41 +++++++
 arch/arm64/boot/dts/amlogic/amlogic-a9.dtsi        | 127 +++++++++++++++++++++
 3 files changed, 169 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 15f9c817e502..57bc440fa55c 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-a9-a311y3-by401.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-s6-s905x5-bl209.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-by401.dts b/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-by401.dts
new file mode 100644
index 000000000000..ad35a3292d49
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-by401.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2026 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-a9.dtsi"
+/ {
+	model = "Amlogic A311DY3 BY401 Development Board";
+	compatible = "amlogic,by401", "amlogic,a9";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 35 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x05000000 0x0 0x2300000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a9.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a9.dtsi
new file mode 100644
index 000000000000..a3744547edde
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a9.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2026 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@ff800000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xff800000 0 0x1000>,
+			      <0x0 0xff840000 0 0x8000>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		aobus: bus@ffa00000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xffa00000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xffa00000 0x0 0x100000>;
+
+			uart_b: serial@1e000 {
+				compatible = "amlogic,a9-uart",
+					     "amlogic,meson-s4-uart";
+				reg = <0x0 0x1e000 0x0 0x18>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+		};
+	};
+};
+

-- 
2.52.0



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 2/3] dt-bindings: serial: amlogic,meson-uart: Add compatible string for A9

[Krzysztof Kozlowski]

On Thu, Feb 05, 2026 at 06:04:03AM +0000, Xianwei Zhao wrote:
> Amlogic A9 SoCs uses the same UART controller as S4 SoCs.
> There is no need for an extra compatible line in the driver,
> but add A9 compatible line for documentation.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
>  Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml | 1 +

Don't combine independent subsystems which prefer to receive separate
patchsets. There is no reason why this serial patch should be included here...

Best regards,
Krzysztof


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 1/3] dt-bindings: arm: amlogic: add A311Y3 support

[Krzysztof Kozlowski]

On Thu, Feb 05, 2026 at 06:04:02AM +0000, Xianwei Zhao wrote:
> Add bindings for the Amlogic BY401 board, using A311Y3 Soc from
> Amlogic A9 family chip.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
>  Documentation/devicetree/bindings/arm/amlogic.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 2/3] dt-bindings: serial: amlogic,meson-uart: Add compatible string for A9

[Krzysztof Kozlowski]

On Thu, Feb 05, 2026 at 06:04:03AM +0000, Xianwei Zhao wrote:
> Amlogic A9 SoCs uses the same UART controller as S4 SoCs.
> There is no need for an extra compatible line in the driver,
> but add A9 compatible line for documentation.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
>  Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 2/3] dt-bindings: serial: amlogic,meson-uart: Add compatible string for A9

[Martin Blumenstingl]

On Thu, Feb 5, 2026 at 7:04 AM Xianwei Zhao via B4 Relay
<devnull+xianwei.zhao.amlogic.com@kernel.org> wrote:
>
> From: Xianwei Zhao <xianwei.zhao@amlogic.com>
>
> Amlogic A9 SoCs uses the same UART controller as S4 SoCs.
> There is no need for an extra compatible line in the driver,
> but add A9 compatible line for documentation.
>
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 1/3] dt-bindings: arm: amlogic: add A311Y3 support

[Martin Blumenstingl]

On Thu, Feb 5, 2026 at 7:04 AM Xianwei Zhao via B4 Relay
<devnull+xianwei.zhao.amlogic.com@kernel.org> wrote:
>
> From: Xianwei Zhao <xianwei.zhao@amlogic.com>
>
> Add bindings for the Amlogic BY401 board, using A311Y3 Soc from
> Amlogic A9 family chip.
>
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 3/3] arm64: dts: add support for A9 based Amlogic BY401

[Martin Blumenstingl]

On Thu, Feb 5, 2026 at 7:04 AM Xianwei Zhao via B4 Relay
<devnull+xianwei.zhao.amlogic.com@kernel.org> wrote:
[...]
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-by401.dts b/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-by401.dts
> new file mode 100644
> index 000000000000..ad35a3292d49
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-by401.dts
> @@ -0,0 +1,41 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2026 Amlogic, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "amlogic-a9.dtsi"
> +/ {
> +       model = "Amlogic A311DY3 BY401 Development Board";
> +       compatible = "amlogic,by401", "amlogic,a9";
> +       interrupt-parent = <&gic>;
Shouldn't this go into amlogic-a9.dtsi (I can't see why different
boards may choose a different default interrupt-parent)?

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 3/3] arm64: dts: add support for A9 based Amlogic BY401

[Xianwei Zhao]

Hi Martin,
    Thanks for your reply.

On 2026/2/10 06:19, Martin Blumenstingl wrote:
> On Thu, Feb 5, 2026 at 7:04 AM Xianwei Zhao via B4 Relay
> <devnull+xianwei.zhao.amlogic.com@kernel.org>  wrote:
> [...]
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-by401.dts b/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-by401.dts
>> new file mode 100644
>> index 000000000000..ad35a3292d49
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a9-a311y3-by401.dts
>> @@ -0,0 +1,41 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2026 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "amlogic-a9.dtsi"
>> +/ {
>> +       model = "Amlogic A311DY3 BY401 Development Board";
>> +       compatible = "amlogic,by401", "amlogic,a9";
>> +       interrupt-parent = <&gic>;
> Shouldn't this go into amlogic-a9.dtsi (I can't see why different
> boards may choose a different default interrupt-parent)?
Will do.

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic