[PATCH] gpu: ipu-v3: vdic: include AUTO field order bit in ipu_vdi_set_field_order

[Steve Longerbeam <slongerbeam@gmail.com>]

The field order selection in VDIC_C register uses different bits
depending on whether the VDIC is receiving from a CSI ("AUTO") or
from memory ("MAN"). Since the VDIC cannot receive from both CSI
and memory at the same time, set or clear both field order bits to
cover both cases.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
---
 drivers/gpu/ipu-v3/ipu-vdi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/ipu-v3/ipu-vdi.c b/drivers/gpu/ipu-v3/ipu-vdi.c
index f27bf5a..a663893 100644
--- a/drivers/gpu/ipu-v3/ipu-vdi.c
+++ b/drivers/gpu/ipu-v3/ipu-vdi.c
@@ -88,9 +88,9 @@ void ipu_vdi_set_field_order(struct ipu_vdi *vdi, v4l2_std_id std, u32 field)
 
 	reg = ipu_vdi_read(vdi, VDI_C);
 	if (top_field_0)
-		reg &= ~VDI_C_TOP_FIELD_MAN_1;
+		reg &= ~(VDI_C_TOP_FIELD_MAN_1 | VDI_C_TOP_FIELD_AUTO_1);
 	else
-		reg |= VDI_C_TOP_FIELD_MAN_1;
+		reg |= VDI_C_TOP_FIELD_MAN_1 | VDI_C_TOP_FIELD_AUTO_1;
 	ipu_vdi_write(vdi, reg, VDI_C);
 
 	spin_unlock_irqrestore(&vdi->lock, flags);
-- 
2.7.4