[PATCH v6 5/5] ASoC: fsl_easrc: expose individual DAIs per conversion path

[PATCH v6 5/5] ASoC: fsl_easrc: expose individual DAIs per conversion path

[shengjiu.wang]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

The i.MX EASRC hardware supports four independent conversion contexts
(A, B, C, D). The driver previously registered a single DAI with generic
stream names "ASRC-Playback" and "ASRC-Capture", which prevents
multiple independent conversion paths from being used simultaneously.

Replace the single fsl_easrc_dai instance with an array of four DAI
drivers to allow up to four independent conversion paths to be active
at the same time:

  easrc-0 -- ASRC-Playback / ASRC-Capture (backward compatible)
  easrc-1 -- ASRC1-Playback / ASRC1-Capture
  easrc-2 -- ASRC2-Playback / ASRC2-Capture
  easrc-3 -- ASRC3-Playback / ASRC3-Capture

easrc-0 retains the original generic stream names to preserve backward
compatibility with existing machine drivers and board configurations.
Each DAI retains the same channel, rate and format capabilities as the
original, including IEC958 subframe support on the capture side. Update
the devm_snd_soc_register_component() call to register all four DAIs.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Chancel Liu <chancel.liu@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 sound/soc/fsl/fsl_easrc.c | 112 +++++++++++++++++++++++++++++++-------
 1 file changed, 92 insertions(+), 20 deletions(-)

diff --git a/sound/soc/fsl/fsl_easrc.c b/sound/soc/fsl/fsl_easrc.c
index 4401c4e100b3..5d715bc07357 100644
--- a/sound/soc/fsl/fsl_easrc.c
+++ b/sound/soc/fsl/fsl_easrc.c
@@ -1589,27 +1589,99 @@ static const struct snd_soc_dai_ops fsl_easrc_dai_ops = {
 	.hw_free	= fsl_easrc_hw_free,
 };
 
-static struct snd_soc_dai_driver fsl_easrc_dai = {
-	.playback = {
-		.stream_name = "ASRC-Playback",
-		.channels_min = 1,
-		.channels_max = 32,
-		.rate_min = 8000,
-		.rate_max = 768000,
-		.rates = SNDRV_PCM_RATE_KNOT,
-		.formats = FSL_EASRC_FORMATS,
+static struct snd_soc_dai_driver fsl_easrc_dai[] = {
+	{
+		.name = "easrc-0",
+		.playback = {
+			.stream_name = "ASRC-Playback",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS,
+		},
+		.capture = {
+			.stream_name = "ASRC-Capture",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+		},
+		.ops = &fsl_easrc_dai_ops,
 	},
-	.capture = {
-		.stream_name = "ASRC-Capture",
-		.channels_min = 1,
-		.channels_max = 32,
-		.rate_min = 8000,
-		.rate_max = 768000,
-		.rates = SNDRV_PCM_RATE_KNOT,
-		.formats = FSL_EASRC_FORMATS |
-			   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+	{
+		.name = "easrc-1",
+		.playback = {
+			.stream_name = "ASRC1-Playback",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS,
+		},
+		.capture = {
+			.stream_name = "ASRC1-Capture",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+		},
+		.ops = &fsl_easrc_dai_ops,
+	},
+	{
+		.name = "easrc-2",
+		.playback = {
+			.stream_name = "ASRC2-Playback",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS,
+		},
+		.capture = {
+			.stream_name = "ASRC2-Capture",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+		},
+		.ops = &fsl_easrc_dai_ops,
+	},
+	{
+		.name = "easrc-3",
+		.playback = {
+			.stream_name = "ASRC3-Playback",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS,
+		},
+		.capture = {
+			.stream_name = "ASRC3-Capture",
+			.channels_min = 1,
+			.channels_max = 32,
+			.rate_min = 8000,
+			.rate_max = 768000,
+			.rates = SNDRV_PCM_RATE_KNOT,
+			.formats = FSL_EASRC_FORMATS |
+				   SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE,
+		},
+		.ops = &fsl_easrc_dai_ops,
 	},
-	.ops = &fsl_easrc_dai_ops,
 };
 
 static const struct snd_soc_component_driver fsl_easrc_component = {
@@ -2234,7 +2306,7 @@ static int fsl_easrc_probe(struct platform_device *pdev)
 	regcache_cache_only(easrc->regmap, true);
 
 	ret = devm_snd_soc_register_component(dev, &fsl_easrc_component,
-					      &fsl_easrc_dai, 1);
+					      fsl_easrc_dai, ARRAY_SIZE(fsl_easrc_dai));
 	if (ret) {
 		dev_err(dev, "failed to register ASoC DAI\n");
 		goto err_pm_disable;
-- 
2.34.1

Re: [PATCH v6 5/5] ASoC: fsl_easrc: expose individual DAIs per conversion path

[Mark Brown]

On Mon, 28 Sep 2026 14:17:56 +0800, shengjiu.wang@oss.nxp.com wrote:
> The i.MX EASRC hardware supports four independent conversion contexts
> (A, B, C, D). The driver previously registered a single DAI with generic
> stream names "ASRC-Playback" and "ASRC-Capture", which prevents
> multiple independent conversion paths from being used simultaneously.
> 
> Replace the single fsl_easrc_dai instance with an array of four DAI
> drivers to allow up to four independent conversion paths to be active
> at the same time:
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[5/5] ASoC: fsl_easrc: expose individual DAIs per conversion path
      https://git.kernel.org/broonie/sound/c/788e893edb6a

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark