[PATCH 0/2] Enable QPIC-SPI-NAND controller for ipq5210

[PATCH 0/2] Enable QPIC-SPI-NAND controller for ipq5210

[Varadarajan Narayanan]

Document the NAND controller binding and add the DT nodes to
enable the QPIC-SPI-NAND controller in ipq5210.

Functionally depends on [1]

1 - https://lore.kernel.org/linux-arm-msm/20260514-bam-fix-v5-1-58f6edb34969@oss.qualcomm.com/

Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
---
Varadarajan Narayanan (2):
      spi: dt-bindings: spi-qpic-snand: Add ipq5210 compatible
      arm64: dts: qcom: ipq5210: Add QPIC SPI NAND controller support

 .../bindings/spi/qcom,spi-qpic-snand.yaml          |  1 +
 arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts        | 42 ++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/ipq5210.dtsi              | 29 +++++++++++++++
 3 files changed, 72 insertions(+)
---
base-commit: e98d21c170b01ddef366f023bbfcf6b31509fa83
change-id: 20260514-ipq5210-nand-eb7e15d0d371
prerequisite-change-id: 20260514-bam-fix-142a0ee8057e:v5
prerequisite-patch-id: 9e9abb177bcb562f5a07a4865e9d88e82dbb98b8

Best regards,
-- 
Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>

[PATCH 1/2] spi: dt-bindings: spi-qpic-snand: Add ipq5210 compatible

[Varadarajan Narayanan]

Since the QPIC-SPI-NAND flash controller present in ipq5210 is the same
as the one found in ipq9574, document the ipq5210 compatible and with
ipq9574 as the fallback.

Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
index 7d0571feb46d..829da22537d4 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
@@ -25,6 +25,7 @@ properties:
       - items:
           - enum:
               - qcom,ipq5018-snand
+              - qcom,ipq5210-snand
               - qcom,ipq5332-snand
               - qcom,ipq5424-snand
           - const: qcom,ipq9574-snand

-- 
2.34.1

[PATCH 2/2] arm64: dts: qcom: ipq5210: Add QPIC SPI NAND controller support

[Varadarajan Narayanan]

Add device tree nodes for QPIC SPI NAND flash controller support on
ipq5210 SoC.

The ipq5210 SoC includes a QPIC controller that supports SPI NAND flash
devices with hardware ECC capabilities and DMA support through BAM (Bus
Access Manager).

Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts | 42 +++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/ipq5210.dtsi       | 29 ++++++++++++++++++++
 2 files changed, 71 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts b/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
index 941f866ecfe9..4813662c2d6c 100644
--- a/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
@@ -20,6 +20,25 @@ chosen {
 	};
 };
 
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qpic_snand_default_state>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-ecc-engine = <&qpic_nand>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
+};
+
 &sdhc {
 	max-frequency = <192000000>;
 	bus-width = <4>;
@@ -36,6 +55,29 @@ &sleep_clk {
 };
 
 &tlmm {
+	qpic_snand_default_state: qpic-snand-default-state {
+		clock-pins {
+			pins = "gpio5";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cs-pins {
+			pins = "gpio4";
+			function = "qspi_cs_n";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
 	qup_uart1_default_state: qup-uart1-default-state {
 		pins = "gpio38", "gpio39";
 		function = "qup_se1";
diff --git a/arch/arm64/boot/dts/qcom/ipq5210.dtsi b/arch/arm64/boot/dts/qcom/ipq5210.dtsi
index 3761eb03ab24..7fd4291caff2 100644
--- a/arch/arm64/boot/dts/qcom/ipq5210.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5210.dtsi
@@ -204,6 +204,35 @@ sdhc: mmc@7804000 {
 			status = "disabled";
 		};
 
+		qpic_bam: dma-controller@7984000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0 0x07984000 0x0 0x1c000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		qpic_nand: spi@79b0000 {
+			compatible = "qcom,ipq5210-snand", "qcom,ipq9574-snand";
+			reg = <0x0 0x079b0000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&gcc GCC_QPIC_CLK>,
+				 <&gcc GCC_QPIC_AHB_CLK>,
+				 <&gcc GCC_QPIC_IO_MACRO_CLK>;
+			clock-names = "core", "aon", "iom";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+
+			status = "disabled";
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;

-- 
2.34.1

Re: (subset) [PATCH 0/2] Enable QPIC-SPI-NAND controller for ipq5210

[Mark Brown]

On Thu, 14 May 2026 12:15:30 +0530, Varadarajan Narayanan wrote:
> Enable QPIC-SPI-NAND controller for ipq5210
> 
> Document the NAND controller binding and add the DT nodes to
> enable the QPIC-SPI-NAND controller in ipq5210.
> 
> Functionally depends on [1]
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-7.1

Thanks!

[1/2] spi: dt-bindings: spi-qpic-snand: Add ipq5210 compatible
      https://git.kernel.org/broonie/spi/c/60474437af5f

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: [PATCH 2/2] arm64: dts: qcom: ipq5210: Add QPIC SPI NAND controller support

[Konrad Dybcio]

On 5/14/26 8:45 AM, Varadarajan Narayanan wrote:
> Add device tree nodes for QPIC SPI NAND flash controller support on
> ipq5210 SoC.
> 
> The ipq5210 SoC includes a QPIC controller that supports SPI NAND flash
> devices with hardware ECC capabilities and DMA support through BAM (Bus
> Access Manager).
> 
> Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts | 42 +++++++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/ipq5210.dtsi       | 29 ++++++++++++++++++++

Please align with your colleague's submission for similar platforms:

https://lore.kernel.org/linux-arm-msm/20260306113940.1654304-3-quic_mdalam@quicinc.com/

->

- separate commit for SoC and board
- is the BAM host v1.7.0 or v1.7.4?
- style: clock/dma-names, 1 entry per line, please

Konrad