* [PATCH v4 0/2] drm/imx: replace simple display pipe with atomic helpers
@ 2026-09-19 14:59 Ze Huang
2026-09-19 14:59 ` [PATCH v4 1/2] drm/imx/lcdc: avoid duplicate clk_per enable Ze Huang
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Ze Huang @ 2026-09-19 14:59 UTC (permalink / raw)
To: Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
David Airlie, Simona Vetter, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Uwe Kleine-König, Marian Cichy
Cc: Ze Huang, dri-devel, imx, linux-arm-kernel, linux-kernel
struct drm_simple_display_pipe was meant to simplify simple DRM
drivers, but instead adds an extra wrapper around normal DRM atomic
helper setup. As noted in Documentation/gpu/todo.rst, remaining users
should be converted to regular atomic helpers and stop depending on the
simple-KMS interfaces.
The series replaces drm_simple_display_pipe_init() with explicit
primary plane, CRTC and encoder setup, and moves the old simple-pipe
callbacks into regular plane and CRTC helper callbacks named according
to local driver conventions.
The conversion preserves helper behavior that used to be implicit in
drm_simple_kms_helper.c, including plane-state validation, CRTC
primary-plane checks, affected-plane propagation, framebuffer prepare
handling, and existing event/vblank flow where applicable.
Result is less helper indirection and more explicit driver-side atomic
wiring, with no remaining simple-KMS dependency in this driver.
Changes are build-tested only. No hardware testing has been performed.
The patches are based on v7.3-rc2.
AI usage disclosure:
- AI tools were also used to review the code and suggest code changes for
the DRM atomic conversion.
Thanks,
Ze Huang
Signed-off-by: Ze Huang <ze.huang@oss.qualcomm.com>
---
Changes in v4:
- Use drm_crtc_vblank_atomic_flush() instead of the driver's own flush
callback.
- Replace the reset callbacks with the atomic_create_state helpers and use
drm_mode_config_create_initial_state() in probe.
- Link to v3: https://lore.kernel.org/all/20260727-drm-simple-kms-removal-v3-0-de36e534f7a1@oss.qualcomm.com/
Changes in v3:
- Add a new preparatory patch to avoid duplicate clk_per enables in
imx-lcdc pipe update after CRTC enable.
- Use commit-local atomic state in enable/update/check paths.
- Link to v2: https://patch.msgid.link/20260716-drm-simple-kms-removal-v2-1-7e4a6b8528e6@oss.qualcomm.com/
Changes in v2:
- use 'commit' as name of struct drm_atomic_commit in atomic helpers
- improve control flow in *_crtc_helper_atomic_check() and
*_plane_helper_atomic_check()
- Moved page-flip/vblank event handling out of plane update paths and into
CRTC atomic_flush(), using atomic_flush and disable paths
- decide clock disable by old crtc state
- add calls to drm_crtc_vblank_on() and drm_crtc_vblank_off() in crtc
atomic_enable() and atomic_disbale()
- test crtc_state->enable before mode size check
- Link to v1: https://patch.msgid.link/20260705-drm-simple-kms-removal-v1-0-b4e1ca053623@oss.qualcomm.com
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: David Airlie <airlied@gmail.com>
To: Simona Vetter <simona@ffwll.ch>
To: Frank Li <Frank.Li@nxp.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
To: Pengutronix Kernel Team <kernel@pengutronix.de>
To: Fabio Estevam <festevam@gmail.com>
To: Philipp Zabel <p.zabel@pengutronix.de>
To: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
To: Marian Cichy <m.cichy@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Cc: imx@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
Ze Huang (2):
drm/imx/lcdc: avoid duplicate clk_per enable
drm/imx: replace struct drm_simple_display_pipe with regular atomic helpers
drivers/gpu/drm/imx/lcdc/imx-lcdc.c | 249 +++++++++++++++++++++++++-----------
1 file changed, 175 insertions(+), 74 deletions(-)
---
base-commit: 5e036ce12de91c6fd674dad33b169c6150be2a7a
change-id: 20260919-b4-imx-simple-kms-v4-3f7d32e17548
Best regards,
--
Ze Huang <ze.huang@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v4 1/2] drm/imx/lcdc: avoid duplicate clk_per enable
2026-09-19 14:59 [PATCH v4 0/2] drm/imx: replace simple display pipe with atomic helpers Ze Huang
@ 2026-09-19 14:59 ` Ze Huang
2026-09-19 14:59 ` [PATCH v4 2/2] drm/imx: replace struct drm_simple_display_pipe with regular atomic helpers Ze Huang
2026-10-01 7:25 ` [PATCH v4 0/2] drm/imx: replace simple display pipe with " Thomas Zimmermann
2 siblings, 0 replies; 5+ messages in thread
From: Ze Huang @ 2026-09-19 14:59 UTC (permalink / raw)
To: Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
David Airlie, Simona Vetter, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Uwe Kleine-König, Marian Cichy
Cc: Ze Huang, dri-devel, imx, linux-arm-kernel, linux-kernel
The simple-KMS helper calls the pipe update after enabling the CRTC.
On an enable commit, imx_lcdc_pipe_enable() already programs the
mode and enables clk_per. The following pipe update sees the plane move
from no CRTC to the active CRTC, treats it as a mode update, and calls
imx_lcdc_update_hw_registers() again.
That second call has no old CRTC state to disable clk_per first, but it
enables clk_per again at the end. The disable path only drops one
reference, leaving clk_per enabled after each on/off cycle.
Skip the register update from the pipe update path when the CRTC already
needs a modeset. The enable path has already programmed the hardware for
that commit; keep the event handling in pipe update unchanged.
Fixes: c87e859cdeb5 ("drm/imx/lcdc: Implement DRM driver for imx25")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ze Huang <ze.huang@oss.qualcomm.com>
---
drivers/gpu/drm/imx/lcdc/imx-lcdc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/imx/lcdc/imx-lcdc.c b/drivers/gpu/drm/imx/lcdc/imx-lcdc.c
index c67fe80b8115..e00e52c1c46e 100644
--- a/drivers/gpu/drm/imx/lcdc/imx-lcdc.c
+++ b/drivers/gpu/drm/imx/lcdc/imx-lcdc.c
@@ -310,7 +310,8 @@ static void imx_lcdc_pipe_update(struct drm_simple_display_pipe *pipe,
else if (old_crtc != crtc)
mode_changed = true;
- imx_lcdc_update_hw_registers(pipe, old_state, mode_changed);
+ if (!drm_atomic_crtc_needs_modeset(crtc->state))
+ imx_lcdc_update_hw_registers(pipe, old_state, mode_changed);
if (event) {
crtc->state->event = NULL;
--
2.55.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v4 2/2] drm/imx: replace struct drm_simple_display_pipe with regular atomic helpers
2026-09-19 14:59 [PATCH v4 0/2] drm/imx: replace simple display pipe with atomic helpers Ze Huang
2026-09-19 14:59 ` [PATCH v4 1/2] drm/imx/lcdc: avoid duplicate clk_per enable Ze Huang
@ 2026-09-19 14:59 ` Ze Huang
2026-09-23 7:12 ` Thomas Zimmermann
2026-10-01 7:25 ` [PATCH v4 0/2] drm/imx: replace simple display pipe with " Thomas Zimmermann
2 siblings, 1 reply; 5+ messages in thread
From: Ze Huang @ 2026-09-19 14:59 UTC (permalink / raw)
To: Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
David Airlie, Simona Vetter, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Philipp Zabel,
Uwe Kleine-König, Marian Cichy
Cc: Ze Huang, dri-devel, imx, linux-arm-kernel, linux-kernel
Convert i.MX LCDC to explicit primary plane, CRTC and encoder objects.
Keep no-scaling plane check and GEM framebuffer prepare callback from
simple-KMS path.
Wire the vblank lifecycle explicitly with CRTC vblank callbacks and
drm_crtc_vblank_on()/drm_crtc_vblank_off(). Use the old CRTC state in
the disable path for clock unwinding so the clock reference count
remains paired with the previous active state.
Use the atomic_create_state helpers with
drm_mode_config_create_initial_state() in probe, and
drm_crtc_vblank_atomic_flush() for the flush callback.
Signed-off-by: Ze Huang <ze.huang@oss.qualcomm.com>
---
drivers/gpu/drm/imx/lcdc/imx-lcdc.c | 250 +++++++++++++++++++++++++-----------
1 file changed, 175 insertions(+), 75 deletions(-)
diff --git a/drivers/gpu/drm/imx/lcdc/imx-lcdc.c b/drivers/gpu/drm/imx/lcdc/imx-lcdc.c
index e00e52c1c46e..8f0a0d4cf61a 100644
--- a/drivers/gpu/drm/imx/lcdc/imx-lcdc.c
+++ b/drivers/gpu/drm/imx/lcdc/imx-lcdc.c
@@ -2,6 +2,7 @@
// SPDX-FileCopyrightText: 2020 Marian Cichy <M.Cichy@pengutronix.de>
#include <drm/clients/drm_client_setup.h>
+#include <drm/drm_atomic.h>
#include <drm/drm_bridge.h>
#include <drm/drm_bridge_connector.h>
#include <drm/drm_damage_helper.h>
@@ -14,10 +15,11 @@
#include <drm/drm_gem_dma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_of.h>
+#include <drm/drm_plane_helper.h>
#include <drm/drm_print.h>
#include <drm/drm_probe_helper.h>
-#include <drm/drm_simple_kms_helper.h>
#include <drm/drm_vblank.h>
+#include <drm/drm_vblank_helper.h>
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
@@ -101,7 +103,9 @@
struct imx_lcdc {
struct drm_device drm;
- struct drm_simple_display_pipe pipe;
+ struct drm_plane plane;
+ struct drm_crtc crtc;
+ struct drm_encoder encoder;
struct drm_connector *connector;
void __iomem *base;
@@ -134,14 +138,15 @@ static unsigned int imx_lcdc_get_format(unsigned int drm_format)
}
}
-static void imx_lcdc_update_hw_registers(struct drm_simple_display_pipe *pipe,
- struct drm_plane_state *old_state,
+static void imx_lcdc_update_hw_registers(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_crtc_state,
+ struct drm_crtc_state *new_crtc_state,
+ struct drm_plane_state *new_state,
bool mode_set)
{
- struct drm_crtc *crtc = &pipe->crtc;
- struct drm_plane_state *new_state = pipe->plane.state;
+ struct imx_lcdc *lcdc = imx_lcdc_from_drmdev(crtc->dev);
+ const struct drm_display_mode *mode = &new_crtc_state->mode;
struct drm_framebuffer *fb = new_state->fb;
- struct imx_lcdc *lcdc = imx_lcdc_from_drmdev(pipe->crtc.dev);
u32 lpcr, lvcr, lhcr;
u32 framesize;
dma_addr_t addr;
@@ -154,24 +159,24 @@ static void imx_lcdc_update_hw_registers(struct drm_simple_display_pipe *pipe,
return;
/* Disable PER clock to make register write possible */
- if (old_state && old_state->crtc && old_state->crtc->enabled)
+ if (old_crtc_state && old_crtc_state->enable)
clk_disable_unprepare(lcdc->clk_per);
/* Framesize */
- framesize = FIELD_PREP(IMX21LCDC_LSR_XMAX, crtc->mode.hdisplay >> 4) |
- FIELD_PREP(IMX21LCDC_LSR_YMAX, crtc->mode.vdisplay);
+ framesize = FIELD_PREP(IMX21LCDC_LSR_XMAX, mode->hdisplay >> 4) |
+ FIELD_PREP(IMX21LCDC_LSR_YMAX, mode->vdisplay);
writel(framesize, lcdc->base + IMX21LCDC_LSR);
/* HSYNC */
- lhcr = FIELD_PREP(IMX21LCDC_LHCR_HFPORCH, crtc->mode.hsync_start - crtc->mode.hdisplay - 1) |
- FIELD_PREP(IMX21LCDC_LHCR_HWIDTH, crtc->mode.hsync_end - crtc->mode.hsync_start - 1) |
- FIELD_PREP(IMX21LCDC_LHCR_HBPORCH, crtc->mode.htotal - crtc->mode.hsync_end - 3);
+ lhcr = FIELD_PREP(IMX21LCDC_LHCR_HFPORCH, mode->hsync_start - mode->hdisplay - 1) |
+ FIELD_PREP(IMX21LCDC_LHCR_HWIDTH, mode->hsync_end - mode->hsync_start - 1) |
+ FIELD_PREP(IMX21LCDC_LHCR_HBPORCH, mode->htotal - mode->hsync_end - 3);
writel(lhcr, lcdc->base + IMX21LCDC_LHCR);
/* VSYNC */
- lvcr = FIELD_PREP(IMX21LCDC_LVCR_VFPORCH, crtc->mode.vsync_start - crtc->mode.vdisplay) |
- FIELD_PREP(IMX21LCDC_LVCR_VWIDTH, crtc->mode.vsync_end - crtc->mode.vsync_start) |
- FIELD_PREP(IMX21LCDC_LVCR_VBPORCH, crtc->mode.vtotal - crtc->mode.vsync_end);
+ lvcr = FIELD_PREP(IMX21LCDC_LVCR_VFPORCH, mode->vsync_start - mode->vdisplay) |
+ FIELD_PREP(IMX21LCDC_LVCR_VWIDTH, mode->vsync_end - mode->vsync_start) |
+ FIELD_PREP(IMX21LCDC_LVCR_VBPORCH, mode->vtotal - mode->vsync_end);
writel(lvcr, lcdc->base + IMX21LCDC_LVCR);
lpcr = readl(lcdc->base + IMX21LCDC_LPCR);
@@ -183,19 +188,20 @@ static void imx_lcdc_update_hw_registers(struct drm_simple_display_pipe *pipe,
writel(new_state->fb->pitches[0] / 4, lcdc->base + IMX21LCDC_LVPWR);
/* Enable PER clock */
- if (new_state->crtc->enabled)
+ if (new_crtc_state->enable)
clk_prepare_enable(lcdc->clk_per);
}
-static void imx_lcdc_pipe_enable(struct drm_simple_display_pipe *pipe,
- struct drm_crtc_state *crtc_state,
- struct drm_plane_state *plane_state)
+static void imx_lcdc_crtc_helper_atomic_enable(struct drm_crtc *crtc,
+ struct drm_atomic_commit *commit)
{
int ret;
int clk_div;
int bpp;
- struct imx_lcdc *lcdc = imx_lcdc_from_drmdev(pipe->crtc.dev);
- struct drm_display_mode *mode = &pipe->crtc.mode;
+ struct imx_lcdc *lcdc = imx_lcdc_from_drmdev(crtc->dev);
+ struct drm_crtc_state *cstate = drm_atomic_get_new_crtc_state(commit, crtc);
+ struct drm_plane_state *pstate = drm_atomic_get_new_plane_state(commit, &lcdc->plane);
+ struct drm_display_mode *mode = &cstate->mode;
struct drm_display_info *disp_info = &lcdc->connector->display_info;
const int hsync_pol = (mode->flags & DRM_MODE_FLAG_PHSYNC) ? 0 : 1;
const int vsync_pol = (mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : 1;
@@ -206,7 +212,7 @@ static void imx_lcdc_pipe_enable(struct drm_simple_display_pipe *pipe,
clk_div = DIV_ROUND_CLOSEST_ULL(clk_get_rate(lcdc->clk_per),
mode->clock * 1000);
- bpp = imx_lcdc_get_format(plane_state->fb->format->format);
+ bpp = imx_lcdc_get_format(pstate->fb->format->format);
writel(FIELD_PREP(IMX21LCDC_LPCR_PCD, clk_div - 1) |
FIELD_PREP(IMX21LCDC_LPCR_LPPOL, hsync_pol) |
@@ -230,40 +236,46 @@ static void imx_lcdc_pipe_enable(struct drm_simple_display_pipe *pipe,
ret = clk_prepare_enable(lcdc->clk_ipg);
if (ret) {
- dev_err(pipe->crtc.dev->dev, "Cannot enable ipg clock: %pe\n", ERR_PTR(ret));
+ dev_err(crtc->dev->dev, "Cannot enable ipg clock: %pe\n", ERR_PTR(ret));
return;
}
ret = clk_prepare_enable(lcdc->clk_ahb);
if (ret) {
- dev_err(pipe->crtc.dev->dev, "Cannot enable ahb clock: %pe\n", ERR_PTR(ret));
+ dev_err(crtc->dev->dev, "Cannot enable ahb clock: %pe\n", ERR_PTR(ret));
clk_disable_unprepare(lcdc->clk_ipg);
return;
}
- imx_lcdc_update_hw_registers(pipe, NULL, true);
+ imx_lcdc_update_hw_registers(crtc, NULL, cstate, pstate, true);
/* Enable VBLANK Interrupt */
writel(INTR_EOF, lcdc->base + IMX21LCDC_LIER);
+
+ drm_crtc_vblank_on(crtc);
}
-static void imx_lcdc_pipe_disable(struct drm_simple_display_pipe *pipe)
+static void imx_lcdc_crtc_helper_atomic_disable(struct drm_crtc *crtc,
+ struct drm_atomic_commit *commit)
{
- struct imx_lcdc *lcdc = imx_lcdc_from_drmdev(pipe->crtc.dev);
- struct drm_crtc *crtc = &lcdc->pipe.crtc;
+ struct drm_crtc_state *old_crtc_state = drm_atomic_get_old_crtc_state(commit, crtc);
+ struct drm_crtc_state *new_crtc_state = drm_atomic_get_new_crtc_state(commit, crtc);
+ struct imx_lcdc *lcdc = imx_lcdc_from_drmdev(crtc->dev);
struct drm_pending_vblank_event *event;
+ drm_crtc_vblank_off(crtc);
+
clk_disable_unprepare(lcdc->clk_ahb);
clk_disable_unprepare(lcdc->clk_ipg);
- if (pipe->crtc.enabled)
+ if (old_crtc_state->enable)
clk_disable_unprepare(lcdc->clk_per);
spin_lock_irq(&lcdc->drm.event_lock);
- event = crtc->state->event;
+ event = new_crtc_state->event;
if (event) {
- crtc->state->event = NULL;
+ new_crtc_state->event = NULL;
drm_crtc_send_vblank_event(crtc, event);
}
spin_unlock_irq(&lcdc->drm.event_lock);
@@ -272,66 +284,132 @@ static void imx_lcdc_pipe_disable(struct drm_simple_display_pipe *pipe)
writel(0, lcdc->base + IMX21LCDC_LIER);
}
-static int imx_lcdc_pipe_check(struct drm_simple_display_pipe *pipe,
- struct drm_plane_state *plane_state,
- struct drm_crtc_state *crtc_state)
+static int imx_lcdc_crtc_helper_atomic_check(struct drm_crtc *crtc,
+ struct drm_atomic_commit *commit)
{
+ struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(commit, crtc);
+ struct drm_crtc_state *old_crtc_state = drm_atomic_get_old_crtc_state(commit, crtc);
const struct drm_display_mode *mode = &crtc_state->mode;
- const struct drm_display_mode *old_mode = &pipe->crtc.state->mode;
+ const struct drm_display_mode *old_mode = &old_crtc_state->mode;
+ int ret;
+
+ if (crtc_state->enable) {
+ ret = drm_atomic_helper_check_crtc_primary_plane(crtc_state);
+ if (ret)
+ return ret;
+ }
- if (mode->hdisplay < LCDC_MIN_XRES || mode->hdisplay > LCDC_MAX_XRES ||
- mode->vdisplay < LCDC_MIN_YRES || mode->vdisplay > LCDC_MAX_YRES ||
- mode->hdisplay % 0x10) { /* must be multiple of 16 */
- drm_err(pipe->crtc.dev, "unsupported display mode (%u x %u)\n",
+ if (crtc_state->enable &&
+ (mode->hdisplay < LCDC_MIN_XRES || mode->hdisplay > LCDC_MAX_XRES ||
+ mode->vdisplay < LCDC_MIN_YRES || mode->vdisplay > LCDC_MAX_YRES ||
+ mode->hdisplay % 0x10)) { /* must be multiple of 16 */
+ drm_err(crtc->dev, "unsupported display mode (%u x %u)\n",
mode->hdisplay, mode->vdisplay);
return -EINVAL;
}
- crtc_state->mode_changed =
- old_mode->hdisplay != mode->hdisplay ||
- old_mode->vdisplay != mode->vdisplay;
+ if (old_mode->hdisplay != mode->hdisplay ||
+ old_mode->vdisplay != mode->vdisplay)
+ crtc_state->mode_changed = true;
- return 0;
+ return drm_atomic_add_affected_planes(commit, crtc);
}
-static void imx_lcdc_pipe_update(struct drm_simple_display_pipe *pipe,
- struct drm_plane_state *old_state)
+static void imx_lcdc_plane_helper_atomic_update(struct drm_plane *plane,
+ struct drm_atomic_commit *commit)
{
- struct drm_crtc *crtc = &pipe->crtc;
- struct drm_pending_vblank_event *event = crtc->state->event;
- struct drm_plane_state *new_state = pipe->plane.state;
+ struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(commit, plane);
+ struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(commit, plane);
+ struct drm_crtc *crtc = new_state->crtc;
+ struct drm_crtc_state *old_crtc_state = NULL;
+ struct drm_crtc_state *new_crtc_state;
struct drm_framebuffer *fb = new_state->fb;
struct drm_framebuffer *old_fb = old_state->fb;
struct drm_crtc *old_crtc = old_state->crtc;
bool mode_changed = false;
+ if (!fb || !crtc)
+ return;
+
+ if (old_crtc)
+ old_crtc_state = drm_atomic_get_old_crtc_state(commit, old_crtc);
+
+ new_crtc_state = drm_atomic_get_new_crtc_state(commit, crtc);
+ if (!new_crtc_state)
+ return;
+
if (old_fb && old_fb->format != fb->format)
mode_changed = true;
else if (old_crtc != crtc)
mode_changed = true;
- if (!drm_atomic_crtc_needs_modeset(crtc->state))
- imx_lcdc_update_hw_registers(pipe, old_state, mode_changed);
+ if (!drm_atomic_crtc_needs_modeset(new_crtc_state))
+ imx_lcdc_update_hw_registers(crtc, old_crtc_state, new_crtc_state,
+ new_state, mode_changed);
+}
- if (event) {
- crtc->state->event = NULL;
+static int imx_lcdc_plane_helper_atomic_check(struct drm_plane *plane,
+ struct drm_atomic_commit *commit)
+{
+ struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(commit, plane);
+ struct drm_crtc_state *crtc_state = NULL;
- spin_lock_irq(&crtc->dev->event_lock);
+ if (plane_state->crtc) {
+ crtc_state = drm_atomic_get_crtc_state(commit, plane_state->crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+ }
- if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0)
- drm_crtc_arm_vblank_event(crtc, event);
- else
- drm_crtc_send_vblank_event(crtc, event);
+ return drm_atomic_helper_check_plane_state(plane_state, crtc_state,
+ DRM_PLANE_NO_SCALING,
+ DRM_PLANE_NO_SCALING,
+ false, false);
+}
- spin_unlock_irq(&crtc->dev->event_lock);
- }
+static const struct drm_plane_helper_funcs imx_lcdc_plane_helper_funcs = {
+ .prepare_fb = drm_gem_plane_helper_prepare_fb,
+ .atomic_check = imx_lcdc_plane_helper_atomic_check,
+ .atomic_update = imx_lcdc_plane_helper_atomic_update,
+};
+
+static const struct drm_plane_funcs imx_lcdc_plane_funcs = {
+ .update_plane = drm_atomic_helper_update_plane,
+ .disable_plane = drm_atomic_helper_disable_plane,
+ .destroy = drm_plane_cleanup,
+ .atomic_create_state = drm_atomic_helper_plane_create_state,
+ .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
+};
+
+static const struct drm_crtc_helper_funcs imx_lcdc_crtc_helper_funcs = {
+ .atomic_check = imx_lcdc_crtc_helper_atomic_check,
+ .atomic_enable = imx_lcdc_crtc_helper_atomic_enable,
+ .atomic_disable = imx_lcdc_crtc_helper_atomic_disable,
+ .atomic_flush = drm_crtc_vblank_atomic_flush,
+};
+
+static int imx_lcdc_crtc_enable_vblank(struct drm_crtc *crtc)
+{
+ return 0;
}
-static const struct drm_simple_display_pipe_funcs imx_lcdc_pipe_funcs = {
- .enable = imx_lcdc_pipe_enable,
- .disable = imx_lcdc_pipe_disable,
- .check = imx_lcdc_pipe_check,
- .update = imx_lcdc_pipe_update,
+static void imx_lcdc_crtc_disable_vblank(struct drm_crtc *crtc)
+{
+}
+
+static const struct drm_crtc_funcs imx_lcdc_crtc_funcs = {
+ .atomic_create_state = drm_atomic_helper_crtc_create_state,
+ .destroy = drm_crtc_cleanup,
+ .set_config = drm_atomic_helper_set_config,
+ .page_flip = drm_atomic_helper_page_flip,
+ .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+ .enable_vblank = imx_lcdc_crtc_enable_vblank,
+ .disable_vblank = imx_lcdc_crtc_disable_vblank,
+};
+
+static const struct drm_encoder_funcs imx_lcdc_encoder_funcs = {
+ .destroy = drm_encoder_cleanup,
};
static const struct drm_mode_config_funcs imx_lcdc_mode_config_funcs = {
@@ -369,7 +447,7 @@ MODULE_DEVICE_TABLE(of, imx_lcdc_of_dev_id);
static irqreturn_t imx_lcdc_irq_handler(int irq, void *arg)
{
struct imx_lcdc *lcdc = arg;
- struct drm_crtc *crtc = &lcdc->pipe.crtc;
+ struct drm_crtc *crtc = &lcdc->crtc;
unsigned int status;
status = readl(lcdc->base + IMX21LCDC_LISR);
@@ -387,6 +465,9 @@ static int imx_lcdc_probe(struct platform_device *pdev)
struct imx_lcdc *lcdc;
struct drm_device *drm;
struct drm_bridge *bridge;
+ struct drm_plane *plane;
+ struct drm_crtc *crtc;
+ struct drm_encoder *encoder;
int irq;
int ret;
struct device *dev = &pdev->dev;
@@ -428,23 +509,40 @@ static int imx_lcdc_probe(struct platform_device *pdev)
if (ret)
return dev_err_probe(dev, ret, "Cannot initialize mode configuration structure\n");
- /* CRTC, Plane, Encoder */
- ret = drm_simple_display_pipe_init(drm, &lcdc->pipe,
- &imx_lcdc_pipe_funcs,
- imx_lcdc_formats,
- ARRAY_SIZE(imx_lcdc_formats), NULL, NULL);
+ plane = &lcdc->plane;
+ ret = drm_universal_plane_init(drm, plane, 0,
+ &imx_lcdc_plane_funcs,
+ imx_lcdc_formats,
+ ARRAY_SIZE(imx_lcdc_formats),
+ NULL,
+ DRM_PLANE_TYPE_PRIMARY, NULL);
+ if (ret < 0)
+ return dev_err_probe(drm->dev, ret, "Cannot initialize primary plane\n");
+ drm_plane_helper_add(plane, &imx_lcdc_plane_helper_funcs);
+
+ crtc = &lcdc->crtc;
+ ret = drm_crtc_init_with_planes(drm, crtc, plane, NULL,
+ &imx_lcdc_crtc_funcs, NULL);
+ if (ret < 0)
+ return dev_err_probe(drm->dev, ret, "Cannot initialize CRTC\n");
+ drm_crtc_helper_add(crtc, &imx_lcdc_crtc_helper_funcs);
+
+ encoder = &lcdc->encoder;
+ ret = drm_encoder_init(drm, encoder, &imx_lcdc_encoder_funcs,
+ DRM_MODE_ENCODER_NONE, NULL);
if (ret < 0)
- return dev_err_probe(drm->dev, ret, "Cannot setup simple display pipe\n");
+ return dev_err_probe(drm->dev, ret, "Cannot initialize encoder\n");
+ encoder->possible_crtcs = drm_crtc_mask(crtc);
ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
if (ret < 0)
return dev_err_probe(drm->dev, ret, "Failed to initialize vblank\n");
- ret = drm_bridge_attach(&lcdc->pipe.encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+ ret = drm_bridge_attach(encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
if (ret)
return dev_err_probe(drm->dev, ret, "Cannot attach bridge\n");
- lcdc->connector = drm_bridge_connector_init(drm, &lcdc->pipe.encoder);
+ lcdc->connector = drm_bridge_connector_init(drm, encoder);
if (IS_ERR(lcdc->connector))
return dev_err_probe(drm->dev, PTR_ERR(lcdc->connector), "Cannot init bridge connector\n");
@@ -483,7 +581,9 @@ static int imx_lcdc_probe(struct platform_device *pdev)
drm->mode_config.funcs = &imx_lcdc_mode_config_funcs;
drm->mode_config.helper_private = &imx_lcdc_mode_config_helpers;
- drm_mode_config_reset(drm);
+ ret = drm_mode_config_create_initial_state(drm);
+ if (ret)
+ return dev_err_probe(dev, ret, "Cannot create initial state\n");
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
--
2.55.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v4 2/2] drm/imx: replace struct drm_simple_display_pipe with regular atomic helpers
2026-09-19 14:59 ` [PATCH v4 2/2] drm/imx: replace struct drm_simple_display_pipe with regular atomic helpers Ze Huang
@ 2026-09-23 7:12 ` Thomas Zimmermann
0 siblings, 0 replies; 5+ messages in thread
From: Thomas Zimmermann @ 2026-09-23 7:12 UTC (permalink / raw)
To: Ze Huang, Maarten Lankhorst, Maxime Ripard, David Airlie,
Simona Vetter, Frank Li, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, Philipp Zabel, Uwe Kleine-König,
Marian Cichy
Cc: dri-devel, imx, linux-arm-kernel, linux-kernel
Hi
Am 19.09.26 um 16:59 schrieb Ze Huang:
> Convert i.MX LCDC to explicit primary plane, CRTC and encoder objects.
> Keep no-scaling plane check and GEM framebuffer prepare callback from
> simple-KMS path.
>
> Wire the vblank lifecycle explicitly with CRTC vblank callbacks and
> drm_crtc_vblank_on()/drm_crtc_vblank_off(). Use the old CRTC state in
> the disable path for clock unwinding so the clock reference count
> remains paired with the previous active state.
>
> Use the atomic_create_state helpers with
> drm_mode_config_create_initial_state() in probe, and
> drm_crtc_vblank_atomic_flush() for the flush callback.
>
> Signed-off-by: Ze Huang <ze.huang@oss.qualcomm.com>
IDK how well (or if) this driver is still maintained. I'd give it the
benefit of the doubt to make progress with the DRM cleanup. If there's a
bug in this patch, users will report it quickly.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Best regards
Thomas
> ---
> drivers/gpu/drm/imx/lcdc/imx-lcdc.c | 250 +++++++++++++++++++++++++-----------
> 1 file changed, 175 insertions(+), 75 deletions(-)
>
> diff --git a/drivers/gpu/drm/imx/lcdc/imx-lcdc.c b/drivers/gpu/drm/imx/lcdc/imx-lcdc.c
> index e00e52c1c46e..8f0a0d4cf61a 100644
> --- a/drivers/gpu/drm/imx/lcdc/imx-lcdc.c
> +++ b/drivers/gpu/drm/imx/lcdc/imx-lcdc.c
> @@ -2,6 +2,7 @@
> // SPDX-FileCopyrightText: 2020 Marian Cichy <M.Cichy@pengutronix.de>
>
> #include <drm/clients/drm_client_setup.h>
> +#include <drm/drm_atomic.h>
> #include <drm/drm_bridge.h>
> #include <drm/drm_bridge_connector.h>
> #include <drm/drm_damage_helper.h>
> @@ -14,10 +15,11 @@
> #include <drm/drm_gem_dma_helper.h>
> #include <drm/drm_gem_framebuffer_helper.h>
> #include <drm/drm_of.h>
> +#include <drm/drm_plane_helper.h>
> #include <drm/drm_print.h>
> #include <drm/drm_probe_helper.h>
> -#include <drm/drm_simple_kms_helper.h>
> #include <drm/drm_vblank.h>
> +#include <drm/drm_vblank_helper.h>
> #include <linux/bitfield.h>
> #include <linux/clk.h>
> #include <linux/dma-mapping.h>
> @@ -101,7 +103,9 @@
>
> struct imx_lcdc {
> struct drm_device drm;
> - struct drm_simple_display_pipe pipe;
> + struct drm_plane plane;
> + struct drm_crtc crtc;
> + struct drm_encoder encoder;
> struct drm_connector *connector;
> void __iomem *base;
>
> @@ -134,14 +138,15 @@ static unsigned int imx_lcdc_get_format(unsigned int drm_format)
> }
> }
>
> -static void imx_lcdc_update_hw_registers(struct drm_simple_display_pipe *pipe,
> - struct drm_plane_state *old_state,
> +static void imx_lcdc_update_hw_registers(struct drm_crtc *crtc,
> + struct drm_crtc_state *old_crtc_state,
> + struct drm_crtc_state *new_crtc_state,
> + struct drm_plane_state *new_state,
> bool mode_set)
> {
> - struct drm_crtc *crtc = &pipe->crtc;
> - struct drm_plane_state *new_state = pipe->plane.state;
> + struct imx_lcdc *lcdc = imx_lcdc_from_drmdev(crtc->dev);
> + const struct drm_display_mode *mode = &new_crtc_state->mode;
> struct drm_framebuffer *fb = new_state->fb;
> - struct imx_lcdc *lcdc = imx_lcdc_from_drmdev(pipe->crtc.dev);
> u32 lpcr, lvcr, lhcr;
> u32 framesize;
> dma_addr_t addr;
> @@ -154,24 +159,24 @@ static void imx_lcdc_update_hw_registers(struct drm_simple_display_pipe *pipe,
> return;
>
> /* Disable PER clock to make register write possible */
> - if (old_state && old_state->crtc && old_state->crtc->enabled)
> + if (old_crtc_state && old_crtc_state->enable)
> clk_disable_unprepare(lcdc->clk_per);
>
> /* Framesize */
> - framesize = FIELD_PREP(IMX21LCDC_LSR_XMAX, crtc->mode.hdisplay >> 4) |
> - FIELD_PREP(IMX21LCDC_LSR_YMAX, crtc->mode.vdisplay);
> + framesize = FIELD_PREP(IMX21LCDC_LSR_XMAX, mode->hdisplay >> 4) |
> + FIELD_PREP(IMX21LCDC_LSR_YMAX, mode->vdisplay);
> writel(framesize, lcdc->base + IMX21LCDC_LSR);
>
> /* HSYNC */
> - lhcr = FIELD_PREP(IMX21LCDC_LHCR_HFPORCH, crtc->mode.hsync_start - crtc->mode.hdisplay - 1) |
> - FIELD_PREP(IMX21LCDC_LHCR_HWIDTH, crtc->mode.hsync_end - crtc->mode.hsync_start - 1) |
> - FIELD_PREP(IMX21LCDC_LHCR_HBPORCH, crtc->mode.htotal - crtc->mode.hsync_end - 3);
> + lhcr = FIELD_PREP(IMX21LCDC_LHCR_HFPORCH, mode->hsync_start - mode->hdisplay - 1) |
> + FIELD_PREP(IMX21LCDC_LHCR_HWIDTH, mode->hsync_end - mode->hsync_start - 1) |
> + FIELD_PREP(IMX21LCDC_LHCR_HBPORCH, mode->htotal - mode->hsync_end - 3);
> writel(lhcr, lcdc->base + IMX21LCDC_LHCR);
>
> /* VSYNC */
> - lvcr = FIELD_PREP(IMX21LCDC_LVCR_VFPORCH, crtc->mode.vsync_start - crtc->mode.vdisplay) |
> - FIELD_PREP(IMX21LCDC_LVCR_VWIDTH, crtc->mode.vsync_end - crtc->mode.vsync_start) |
> - FIELD_PREP(IMX21LCDC_LVCR_VBPORCH, crtc->mode.vtotal - crtc->mode.vsync_end);
> + lvcr = FIELD_PREP(IMX21LCDC_LVCR_VFPORCH, mode->vsync_start - mode->vdisplay) |
> + FIELD_PREP(IMX21LCDC_LVCR_VWIDTH, mode->vsync_end - mode->vsync_start) |
> + FIELD_PREP(IMX21LCDC_LVCR_VBPORCH, mode->vtotal - mode->vsync_end);
> writel(lvcr, lcdc->base + IMX21LCDC_LVCR);
>
> lpcr = readl(lcdc->base + IMX21LCDC_LPCR);
> @@ -183,19 +188,20 @@ static void imx_lcdc_update_hw_registers(struct drm_simple_display_pipe *pipe,
> writel(new_state->fb->pitches[0] / 4, lcdc->base + IMX21LCDC_LVPWR);
>
> /* Enable PER clock */
> - if (new_state->crtc->enabled)
> + if (new_crtc_state->enable)
> clk_prepare_enable(lcdc->clk_per);
> }
>
> -static void imx_lcdc_pipe_enable(struct drm_simple_display_pipe *pipe,
> - struct drm_crtc_state *crtc_state,
> - struct drm_plane_state *plane_state)
> +static void imx_lcdc_crtc_helper_atomic_enable(struct drm_crtc *crtc,
> + struct drm_atomic_commit *commit)
> {
> int ret;
> int clk_div;
> int bpp;
> - struct imx_lcdc *lcdc = imx_lcdc_from_drmdev(pipe->crtc.dev);
> - struct drm_display_mode *mode = &pipe->crtc.mode;
> + struct imx_lcdc *lcdc = imx_lcdc_from_drmdev(crtc->dev);
> + struct drm_crtc_state *cstate = drm_atomic_get_new_crtc_state(commit, crtc);
> + struct drm_plane_state *pstate = drm_atomic_get_new_plane_state(commit, &lcdc->plane);
> + struct drm_display_mode *mode = &cstate->mode;
> struct drm_display_info *disp_info = &lcdc->connector->display_info;
> const int hsync_pol = (mode->flags & DRM_MODE_FLAG_PHSYNC) ? 0 : 1;
> const int vsync_pol = (mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : 1;
> @@ -206,7 +212,7 @@ static void imx_lcdc_pipe_enable(struct drm_simple_display_pipe *pipe,
>
> clk_div = DIV_ROUND_CLOSEST_ULL(clk_get_rate(lcdc->clk_per),
> mode->clock * 1000);
> - bpp = imx_lcdc_get_format(plane_state->fb->format->format);
> + bpp = imx_lcdc_get_format(pstate->fb->format->format);
>
> writel(FIELD_PREP(IMX21LCDC_LPCR_PCD, clk_div - 1) |
> FIELD_PREP(IMX21LCDC_LPCR_LPPOL, hsync_pol) |
> @@ -230,40 +236,46 @@ static void imx_lcdc_pipe_enable(struct drm_simple_display_pipe *pipe,
>
> ret = clk_prepare_enable(lcdc->clk_ipg);
> if (ret) {
> - dev_err(pipe->crtc.dev->dev, "Cannot enable ipg clock: %pe\n", ERR_PTR(ret));
> + dev_err(crtc->dev->dev, "Cannot enable ipg clock: %pe\n", ERR_PTR(ret));
> return;
> }
> ret = clk_prepare_enable(lcdc->clk_ahb);
> if (ret) {
> - dev_err(pipe->crtc.dev->dev, "Cannot enable ahb clock: %pe\n", ERR_PTR(ret));
> + dev_err(crtc->dev->dev, "Cannot enable ahb clock: %pe\n", ERR_PTR(ret));
>
> clk_disable_unprepare(lcdc->clk_ipg);
>
> return;
> }
>
> - imx_lcdc_update_hw_registers(pipe, NULL, true);
> + imx_lcdc_update_hw_registers(crtc, NULL, cstate, pstate, true);
>
> /* Enable VBLANK Interrupt */
> writel(INTR_EOF, lcdc->base + IMX21LCDC_LIER);
> +
> + drm_crtc_vblank_on(crtc);
> }
>
> -static void imx_lcdc_pipe_disable(struct drm_simple_display_pipe *pipe)
> +static void imx_lcdc_crtc_helper_atomic_disable(struct drm_crtc *crtc,
> + struct drm_atomic_commit *commit)
> {
> - struct imx_lcdc *lcdc = imx_lcdc_from_drmdev(pipe->crtc.dev);
> - struct drm_crtc *crtc = &lcdc->pipe.crtc;
> + struct drm_crtc_state *old_crtc_state = drm_atomic_get_old_crtc_state(commit, crtc);
> + struct drm_crtc_state *new_crtc_state = drm_atomic_get_new_crtc_state(commit, crtc);
> + struct imx_lcdc *lcdc = imx_lcdc_from_drmdev(crtc->dev);
> struct drm_pending_vblank_event *event;
>
> + drm_crtc_vblank_off(crtc);
> +
> clk_disable_unprepare(lcdc->clk_ahb);
> clk_disable_unprepare(lcdc->clk_ipg);
>
> - if (pipe->crtc.enabled)
> + if (old_crtc_state->enable)
> clk_disable_unprepare(lcdc->clk_per);
>
> spin_lock_irq(&lcdc->drm.event_lock);
> - event = crtc->state->event;
> + event = new_crtc_state->event;
> if (event) {
> - crtc->state->event = NULL;
> + new_crtc_state->event = NULL;
> drm_crtc_send_vblank_event(crtc, event);
> }
> spin_unlock_irq(&lcdc->drm.event_lock);
> @@ -272,66 +284,132 @@ static void imx_lcdc_pipe_disable(struct drm_simple_display_pipe *pipe)
> writel(0, lcdc->base + IMX21LCDC_LIER);
> }
>
> -static int imx_lcdc_pipe_check(struct drm_simple_display_pipe *pipe,
> - struct drm_plane_state *plane_state,
> - struct drm_crtc_state *crtc_state)
> +static int imx_lcdc_crtc_helper_atomic_check(struct drm_crtc *crtc,
> + struct drm_atomic_commit *commit)
> {
> + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(commit, crtc);
> + struct drm_crtc_state *old_crtc_state = drm_atomic_get_old_crtc_state(commit, crtc);
> const struct drm_display_mode *mode = &crtc_state->mode;
> - const struct drm_display_mode *old_mode = &pipe->crtc.state->mode;
> + const struct drm_display_mode *old_mode = &old_crtc_state->mode;
> + int ret;
> +
> + if (crtc_state->enable) {
> + ret = drm_atomic_helper_check_crtc_primary_plane(crtc_state);
> + if (ret)
> + return ret;
> + }
>
> - if (mode->hdisplay < LCDC_MIN_XRES || mode->hdisplay > LCDC_MAX_XRES ||
> - mode->vdisplay < LCDC_MIN_YRES || mode->vdisplay > LCDC_MAX_YRES ||
> - mode->hdisplay % 0x10) { /* must be multiple of 16 */
> - drm_err(pipe->crtc.dev, "unsupported display mode (%u x %u)\n",
> + if (crtc_state->enable &&
> + (mode->hdisplay < LCDC_MIN_XRES || mode->hdisplay > LCDC_MAX_XRES ||
> + mode->vdisplay < LCDC_MIN_YRES || mode->vdisplay > LCDC_MAX_YRES ||
> + mode->hdisplay % 0x10)) { /* must be multiple of 16 */
> + drm_err(crtc->dev, "unsupported display mode (%u x %u)\n",
> mode->hdisplay, mode->vdisplay);
> return -EINVAL;
> }
>
> - crtc_state->mode_changed =
> - old_mode->hdisplay != mode->hdisplay ||
> - old_mode->vdisplay != mode->vdisplay;
> + if (old_mode->hdisplay != mode->hdisplay ||
> + old_mode->vdisplay != mode->vdisplay)
> + crtc_state->mode_changed = true;
>
> - return 0;
> + return drm_atomic_add_affected_planes(commit, crtc);
> }
>
> -static void imx_lcdc_pipe_update(struct drm_simple_display_pipe *pipe,
> - struct drm_plane_state *old_state)
> +static void imx_lcdc_plane_helper_atomic_update(struct drm_plane *plane,
> + struct drm_atomic_commit *commit)
> {
> - struct drm_crtc *crtc = &pipe->crtc;
> - struct drm_pending_vblank_event *event = crtc->state->event;
> - struct drm_plane_state *new_state = pipe->plane.state;
> + struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(commit, plane);
> + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(commit, plane);
> + struct drm_crtc *crtc = new_state->crtc;
> + struct drm_crtc_state *old_crtc_state = NULL;
> + struct drm_crtc_state *new_crtc_state;
> struct drm_framebuffer *fb = new_state->fb;
> struct drm_framebuffer *old_fb = old_state->fb;
> struct drm_crtc *old_crtc = old_state->crtc;
> bool mode_changed = false;
>
> + if (!fb || !crtc)
> + return;
> +
> + if (old_crtc)
> + old_crtc_state = drm_atomic_get_old_crtc_state(commit, old_crtc);
> +
> + new_crtc_state = drm_atomic_get_new_crtc_state(commit, crtc);
> + if (!new_crtc_state)
> + return;
> +
> if (old_fb && old_fb->format != fb->format)
> mode_changed = true;
> else if (old_crtc != crtc)
> mode_changed = true;
>
> - if (!drm_atomic_crtc_needs_modeset(crtc->state))
> - imx_lcdc_update_hw_registers(pipe, old_state, mode_changed);
> + if (!drm_atomic_crtc_needs_modeset(new_crtc_state))
> + imx_lcdc_update_hw_registers(crtc, old_crtc_state, new_crtc_state,
> + new_state, mode_changed);
> +}
>
> - if (event) {
> - crtc->state->event = NULL;
> +static int imx_lcdc_plane_helper_atomic_check(struct drm_plane *plane,
> + struct drm_atomic_commit *commit)
> +{
> + struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(commit, plane);
> + struct drm_crtc_state *crtc_state = NULL;
>
> - spin_lock_irq(&crtc->dev->event_lock);
> + if (plane_state->crtc) {
> + crtc_state = drm_atomic_get_crtc_state(commit, plane_state->crtc);
> + if (IS_ERR(crtc_state))
> + return PTR_ERR(crtc_state);
> + }
>
> - if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0)
> - drm_crtc_arm_vblank_event(crtc, event);
> - else
> - drm_crtc_send_vblank_event(crtc, event);
> + return drm_atomic_helper_check_plane_state(plane_state, crtc_state,
> + DRM_PLANE_NO_SCALING,
> + DRM_PLANE_NO_SCALING,
> + false, false);
> +}
>
> - spin_unlock_irq(&crtc->dev->event_lock);
> - }
> +static const struct drm_plane_helper_funcs imx_lcdc_plane_helper_funcs = {
> + .prepare_fb = drm_gem_plane_helper_prepare_fb,
> + .atomic_check = imx_lcdc_plane_helper_atomic_check,
> + .atomic_update = imx_lcdc_plane_helper_atomic_update,
> +};
> +
> +static const struct drm_plane_funcs imx_lcdc_plane_funcs = {
> + .update_plane = drm_atomic_helper_update_plane,
> + .disable_plane = drm_atomic_helper_disable_plane,
> + .destroy = drm_plane_cleanup,
> + .atomic_create_state = drm_atomic_helper_plane_create_state,
> + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
> +};
> +
> +static const struct drm_crtc_helper_funcs imx_lcdc_crtc_helper_funcs = {
> + .atomic_check = imx_lcdc_crtc_helper_atomic_check,
> + .atomic_enable = imx_lcdc_crtc_helper_atomic_enable,
> + .atomic_disable = imx_lcdc_crtc_helper_atomic_disable,
> + .atomic_flush = drm_crtc_vblank_atomic_flush,
> +};
> +
> +static int imx_lcdc_crtc_enable_vblank(struct drm_crtc *crtc)
> +{
> + return 0;
> }
>
> -static const struct drm_simple_display_pipe_funcs imx_lcdc_pipe_funcs = {
> - .enable = imx_lcdc_pipe_enable,
> - .disable = imx_lcdc_pipe_disable,
> - .check = imx_lcdc_pipe_check,
> - .update = imx_lcdc_pipe_update,
> +static void imx_lcdc_crtc_disable_vblank(struct drm_crtc *crtc)
> +{
> +}
> +
> +static const struct drm_crtc_funcs imx_lcdc_crtc_funcs = {
> + .atomic_create_state = drm_atomic_helper_crtc_create_state,
> + .destroy = drm_crtc_cleanup,
> + .set_config = drm_atomic_helper_set_config,
> + .page_flip = drm_atomic_helper_page_flip,
> + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> + .enable_vblank = imx_lcdc_crtc_enable_vblank,
> + .disable_vblank = imx_lcdc_crtc_disable_vblank,
> +};
> +
> +static const struct drm_encoder_funcs imx_lcdc_encoder_funcs = {
> + .destroy = drm_encoder_cleanup,
> };
>
> static const struct drm_mode_config_funcs imx_lcdc_mode_config_funcs = {
> @@ -369,7 +447,7 @@ MODULE_DEVICE_TABLE(of, imx_lcdc_of_dev_id);
> static irqreturn_t imx_lcdc_irq_handler(int irq, void *arg)
> {
> struct imx_lcdc *lcdc = arg;
> - struct drm_crtc *crtc = &lcdc->pipe.crtc;
> + struct drm_crtc *crtc = &lcdc->crtc;
> unsigned int status;
>
> status = readl(lcdc->base + IMX21LCDC_LISR);
> @@ -387,6 +465,9 @@ static int imx_lcdc_probe(struct platform_device *pdev)
> struct imx_lcdc *lcdc;
> struct drm_device *drm;
> struct drm_bridge *bridge;
> + struct drm_plane *plane;
> + struct drm_crtc *crtc;
> + struct drm_encoder *encoder;
> int irq;
> int ret;
> struct device *dev = &pdev->dev;
> @@ -428,23 +509,40 @@ static int imx_lcdc_probe(struct platform_device *pdev)
> if (ret)
> return dev_err_probe(dev, ret, "Cannot initialize mode configuration structure\n");
>
> - /* CRTC, Plane, Encoder */
> - ret = drm_simple_display_pipe_init(drm, &lcdc->pipe,
> - &imx_lcdc_pipe_funcs,
> - imx_lcdc_formats,
> - ARRAY_SIZE(imx_lcdc_formats), NULL, NULL);
> + plane = &lcdc->plane;
> + ret = drm_universal_plane_init(drm, plane, 0,
> + &imx_lcdc_plane_funcs,
> + imx_lcdc_formats,
> + ARRAY_SIZE(imx_lcdc_formats),
> + NULL,
> + DRM_PLANE_TYPE_PRIMARY, NULL);
> + if (ret < 0)
> + return dev_err_probe(drm->dev, ret, "Cannot initialize primary plane\n");
> + drm_plane_helper_add(plane, &imx_lcdc_plane_helper_funcs);
> +
> + crtc = &lcdc->crtc;
> + ret = drm_crtc_init_with_planes(drm, crtc, plane, NULL,
> + &imx_lcdc_crtc_funcs, NULL);
> + if (ret < 0)
> + return dev_err_probe(drm->dev, ret, "Cannot initialize CRTC\n");
> + drm_crtc_helper_add(crtc, &imx_lcdc_crtc_helper_funcs);
> +
> + encoder = &lcdc->encoder;
> + ret = drm_encoder_init(drm, encoder, &imx_lcdc_encoder_funcs,
> + DRM_MODE_ENCODER_NONE, NULL);
> if (ret < 0)
> - return dev_err_probe(drm->dev, ret, "Cannot setup simple display pipe\n");
> + return dev_err_probe(drm->dev, ret, "Cannot initialize encoder\n");
> + encoder->possible_crtcs = drm_crtc_mask(crtc);
>
> ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
> if (ret < 0)
> return dev_err_probe(drm->dev, ret, "Failed to initialize vblank\n");
>
> - ret = drm_bridge_attach(&lcdc->pipe.encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
> + ret = drm_bridge_attach(encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
> if (ret)
> return dev_err_probe(drm->dev, ret, "Cannot attach bridge\n");
>
> - lcdc->connector = drm_bridge_connector_init(drm, &lcdc->pipe.encoder);
> + lcdc->connector = drm_bridge_connector_init(drm, encoder);
> if (IS_ERR(lcdc->connector))
> return dev_err_probe(drm->dev, PTR_ERR(lcdc->connector), "Cannot init bridge connector\n");
>
> @@ -483,7 +581,9 @@ static int imx_lcdc_probe(struct platform_device *pdev)
> drm->mode_config.funcs = &imx_lcdc_mode_config_funcs;
> drm->mode_config.helper_private = &imx_lcdc_mode_config_helpers;
>
> - drm_mode_config_reset(drm);
> + ret = drm_mode_config_create_initial_state(drm);
> + if (ret)
> + return dev_err_probe(dev, ret, "Cannot create initial state\n");
>
> irq = platform_get_irq(pdev, 0);
> if (irq < 0) {
>
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Jochen Jaser, Andrew McDonald, (HRB 36809, AG Nürnberg)
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v4 0/2] drm/imx: replace simple display pipe with atomic helpers
2026-09-19 14:59 [PATCH v4 0/2] drm/imx: replace simple display pipe with atomic helpers Ze Huang
2026-09-19 14:59 ` [PATCH v4 1/2] drm/imx/lcdc: avoid duplicate clk_per enable Ze Huang
2026-09-19 14:59 ` [PATCH v4 2/2] drm/imx: replace struct drm_simple_display_pipe with regular atomic helpers Ze Huang
@ 2026-10-01 7:25 ` Thomas Zimmermann
2 siblings, 0 replies; 5+ messages in thread
From: Thomas Zimmermann @ 2026-10-01 7:25 UTC (permalink / raw)
To: Ze Huang, Maarten Lankhorst, Maxime Ripard, David Airlie,
Simona Vetter, Frank Li, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, Philipp Zabel, Uwe Kleine-König,
Marian Cichy
Cc: dri-devel, imx, linux-arm-kernel, linux-kernel
Merged into drm-misc-next
Am 19.09.26 um 16:59 schrieb Ze Huang:
> struct drm_simple_display_pipe was meant to simplify simple DRM
> drivers, but instead adds an extra wrapper around normal DRM atomic
> helper setup. As noted in Documentation/gpu/todo.rst, remaining users
> should be converted to regular atomic helpers and stop depending on the
> simple-KMS interfaces.
>
> The series replaces drm_simple_display_pipe_init() with explicit
> primary plane, CRTC and encoder setup, and moves the old simple-pipe
> callbacks into regular plane and CRTC helper callbacks named according
> to local driver conventions.
>
> The conversion preserves helper behavior that used to be implicit in
> drm_simple_kms_helper.c, including plane-state validation, CRTC
> primary-plane checks, affected-plane propagation, framebuffer prepare
> handling, and existing event/vblank flow where applicable.
>
> Result is less helper indirection and more explicit driver-side atomic
> wiring, with no remaining simple-KMS dependency in this driver.
>
> Changes are build-tested only. No hardware testing has been performed.
>
> The patches are based on v7.3-rc2.
>
> AI usage disclosure:
> - AI tools were also used to review the code and suggest code changes for
> the DRM atomic conversion.
>
> Thanks,
> Ze Huang
>
> Signed-off-by: Ze Huang <ze.huang@oss.qualcomm.com>
> ---
> Changes in v4:
> - Use drm_crtc_vblank_atomic_flush() instead of the driver's own flush
> callback.
> - Replace the reset callbacks with the atomic_create_state helpers and use
> drm_mode_config_create_initial_state() in probe.
> - Link to v3: https://lore.kernel.org/all/20260727-drm-simple-kms-removal-v3-0-de36e534f7a1@oss.qualcomm.com/
>
> Changes in v3:
> - Add a new preparatory patch to avoid duplicate clk_per enables in
> imx-lcdc pipe update after CRTC enable.
> - Use commit-local atomic state in enable/update/check paths.
> - Link to v2: https://patch.msgid.link/20260716-drm-simple-kms-removal-v2-1-7e4a6b8528e6@oss.qualcomm.com/
>
> Changes in v2:
> - use 'commit' as name of struct drm_atomic_commit in atomic helpers
> - improve control flow in *_crtc_helper_atomic_check() and
> *_plane_helper_atomic_check()
> - Moved page-flip/vblank event handling out of plane update paths and into
> CRTC atomic_flush(), using atomic_flush and disable paths
> - decide clock disable by old crtc state
> - add calls to drm_crtc_vblank_on() and drm_crtc_vblank_off() in crtc
> atomic_enable() and atomic_disbale()
> - test crtc_state->enable before mode size check
> - Link to v1: https://patch.msgid.link/20260705-drm-simple-kms-removal-v1-0-b4e1ca053623@oss.qualcomm.com
>
> To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> To: Maxime Ripard <mripard@kernel.org>
> To: Thomas Zimmermann <tzimmermann@suse.de>
> To: David Airlie <airlied@gmail.com>
> To: Simona Vetter <simona@ffwll.ch>
> To: Frank Li <Frank.Li@nxp.com>
> To: Sascha Hauer <s.hauer@pengutronix.de>
> To: Pengutronix Kernel Team <kernel@pengutronix.de>
> To: Fabio Estevam <festevam@gmail.com>
> To: Philipp Zabel <p.zabel@pengutronix.de>
> To: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> To: Marian Cichy <m.cichy@pengutronix.de>
> Cc: dri-devel@lists.freedesktop.org
> Cc: imx@lists.linux.dev
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
>
> ---
> Ze Huang (2):
> drm/imx/lcdc: avoid duplicate clk_per enable
> drm/imx: replace struct drm_simple_display_pipe with regular atomic helpers
>
> drivers/gpu/drm/imx/lcdc/imx-lcdc.c | 249 +++++++++++++++++++++++++-----------
> 1 file changed, 175 insertions(+), 74 deletions(-)
> ---
> base-commit: 5e036ce12de91c6fd674dad33b169c6150be2a7a
> change-id: 20260919-b4-imx-simple-kms-v4-3f7d32e17548
>
> Best regards,
> --
> Ze Huang <ze.huang@oss.qualcomm.com>
>
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Stefan Gaiser, Jochen Jaser, Abhinav Puri, (HRB 36809, AG Nürnberg)
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2026-10-01 7:25 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-09-19 14:59 [PATCH v4 0/2] drm/imx: replace simple display pipe with atomic helpers Ze Huang
2026-09-19 14:59 ` [PATCH v4 1/2] drm/imx/lcdc: avoid duplicate clk_per enable Ze Huang
2026-09-19 14:59 ` [PATCH v4 2/2] drm/imx: replace struct drm_simple_display_pipe with regular atomic helpers Ze Huang
2026-09-23 7:12 ` Thomas Zimmermann
2026-10-01 7:25 ` [PATCH v4 0/2] drm/imx: replace simple display pipe with " Thomas Zimmermann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®