mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sagi Maimon <maimon.sagi@gmail.com>
To: Richard Cochran <richardcochran@gmail.com>,
	Vadim Fedorenko <vadim.fedorenko@linux.dev>,
	Jakub Kicinski <kuba@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Paolo Abeni <pabeni@redhat.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	Simon Horman <horms@kernel.org>, Jiri Pirko <jiri@resnulli.us>,
	Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Randy Dunlap <rdunlap@infradead.org>,
	Shuah Khan <skhan@linuxfoundation.org>,
	netdev@vger.kernel.org
Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Sagi Maimon <maimon.sagi@gmail.com>
Subject: [PATCH net-next 4/9] ptp: ocp: forget a CPLD i2c adapter number that no longer resolves
Date: Tue, 22 Sep 2026 17:28:24 +0300	[thread overview]
Message-ID: <20260922142829.57740-5-maimon.sagi@gmail.com> (raw)
In-Reply-To: <20260922142829.57740-1-maimon.sagi@gmail.com>

adva_x1_bus_claim() returned -ENODEV when i2c_get_adapter() found nothing
for the cached number but left the number in place, so
adva_x1_cache_i2c_adap() kept bailing out on its first test and never
resolved the adapter again.  The comment on the parent check claimed a bad
number is forgotten and looked up again on the next sweep; that only held
for a mismatched adapter, not for one that had gone away.

Factor the invalidation out and use it on both paths.

Re-arm the one-shot identification when a new adapter is cached as well: a
different adapter may answer where the previous one did not, and leaving
cpld_id_tried set kept cpld.id absent for the rest of the binding.

Fixes: 3b815e29966f ("ptp: ocp: add TAP CPLD access for ADVA TimeCard X1")
Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com>
---
 drivers/ptp/ptp_ocp.c | 35 ++++++++++++++++++++++++++++++-----
 1 file changed, 30 insertions(+), 5 deletions(-)

diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
index feb61355078a..45313143b6f7 100644
--- a/drivers/ptp/ptp_ocp.c
+++ b/drivers/ptp/ptp_ocp.c
@@ -4574,6 +4574,19 @@ static int adva_x1_i2c_adap_match(struct device *dev, const void *data)
  * both the notifier and a single lookup here can miss the same adapter.
  * Retrying costs a short klist walk per tick until one of them succeeds.
  */
+/*
+ * Forget the cached adapter number so the next sweep resolves it again.
+ * @nr < 0 forgets whatever is cached; otherwise only that number, so a
+ * caller that raced the notifier cannot clear a newer one.
+ */
+static void adva_x1_forget_i2c_adap(struct ptp_ocp *bp, int nr)
+{
+	scoped_guard(spinlock, &bp->cpld_adap_lock) {
+		if (nr < 0 || bp->cpld_i2c_adap_nr == nr)
+			bp->cpld_i2c_adap_nr = -1;
+	}
+}
+
 static void adva_x1_cache_i2c_adap(struct ptp_ocp *bp)
 {
 	struct device *child;
@@ -4598,6 +4611,15 @@ static void adva_x1_cache_i2c_adap(struct ptp_ocp *bp)
 			bp->cpld_i2c_adap_nr = i2c_verify_adapter(child)->nr;
 	}
 
+	/* A different adapter may answer differently, so let the one-shot
+	 * identification run again rather than leaving cpld.id absent for
+	 * the rest of the binding.
+	 */
+	scoped_guard(mutex, &bp->cpld_lock) {
+		bp->cpld_id_tried = false;
+		bp->cpld_id_attempts = 0;
+	}
+
 	put_device(child);
 }
 
@@ -4614,8 +4636,14 @@ static int adva_x1_bus_claim(struct ptp_ocp *bp)
 	lockdep_assert_held(&bp->cpld_lock);
 
 	adap = i2c_get_adapter(READ_ONCE(bp->cpld_i2c_adap_nr));
-	if (!adap)
+	if (!adap) {
+		/* The adapter behind the cached number is gone.  Forget it,
+		 * or adva_x1_cache_i2c_adap() keeps bailing out on its first
+		 * test and never resolves the adapter again.
+		 */
+		adva_x1_forget_i2c_adap(bp, -1);
 		return -ENODEV;
+	}
 
 	/* The number is freed before the notifier clears it, so it can
 	 * already be another adapter's.  Check this is still ours, and drop
@@ -4623,10 +4651,7 @@ static int adva_x1_bus_claim(struct ptp_ocp *bp)
 	 * way, where forgetting it lets the worker look the adapter up again.
 	 */
 	if (!bp->i2c_ctrl || adap->dev.parent != &bp->i2c_ctrl->dev) {
-		scoped_guard(spinlock, &bp->cpld_adap_lock) {
-			if (bp->cpld_i2c_adap_nr == adap->nr)
-				bp->cpld_i2c_adap_nr = -1;
-		}
+		adva_x1_forget_i2c_adap(bp, adap->nr);
 		i2c_put_adapter(adap);
 		return -ENODEV;
 	}
-- 
2.47.0


  parent reply	other threads:[~2026-09-22 14:28 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-22 14:28 [PATCH net-next 0/9] ptp: ocp: TAP CPLD follow-up fixes Sagi Maimon
2026-09-22 14:28 ` [PATCH net-next 1/9] ptp: ocp: move the CPLD identification read off the sync worker Sagi Maimon
2026-09-24 14:29   ` netdev-bot+sashiko
2026-09-22 14:28 ` [PATCH net-next 2/9] ptp: ocp: do not cache EEPROM content after a failed TMC bus hand-back Sagi Maimon
2026-09-24 14:29   ` netdev-bot+sashiko
2026-09-22 14:28 ` [PATCH net-next 3/9] ptp: ocp: hand the TMC bus back once on an acquire timeout Sagi Maimon
2026-09-24 14:29   ` netdev-bot+sashiko
2026-09-22 14:28 ` Sagi Maimon [this message]
2026-09-24 14:29   ` [PATCH net-next 4/9] ptp: ocp: forget a CPLD i2c adapter number that no longer resolves netdev-bot+sashiko
2026-09-22 14:28 ` [PATCH net-next 5/9] ptp: ocp: correct the CPLD bookkeeping comments and the flash progress Sagi Maimon
2026-09-24 14:29   ` netdev-bot+sashiko
2026-09-22 14:28 ` [PATCH net-next 6/9] ptp: ocp: report fw.cpld with an empty value until the USERCODE is read Sagi Maimon
2026-09-24 14:29   ` netdev-bot+sashiko
2026-09-22 14:28 ` [PATCH net-next 7/9] ptp: ocp: drop only the USERCODE when flashing, and drop it before erasing Sagi Maimon
2026-09-24 14:29   ` netdev-bot+sashiko
2026-09-22 14:28 ` [PATCH net-next 8/9] ptp: ocp: tolerate a latched FAILED when entering configuration mode Sagi Maimon
2026-09-24 14:29   ` netdev-bot+sashiko
2026-09-22 14:28 ` [PATCH net-next 9/9] ptp: ocp: confirm the CPLD really left configuration mode after REFRESH Sagi Maimon
2026-09-24 14:29   ` netdev-bot+sashiko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260922142829.57740-5-maimon.sagi@gmail.com \
    --to=maimon.sagi@gmail.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=arkadiusz.kubalewski@intel.com \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=jiri@resnulli.us \
    --cc=kuba@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=rdunlap@infradead.org \
    --cc=richardcochran@gmail.com \
    --cc=skhan@linuxfoundation.org \
    --cc=vadim.fedorenko@linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®