[PATCH v7 00/12] arm64: dts: qcom: Add x1e/Hamoa camera DTSI

[PATCH v7 00/12] arm64: dts: qcom: Add x1e/Hamoa camera DTSI

[Bryan O'Donoghue]

Changes in v7:
- Aligns legacy CSIPHY reg declaration size to standalone size - Loic
- Drops previously merged patches camcc - Bjorn
- Subtracts newlines in dtsi - Konrad
- Uses suggested port names and enablements in dts - Konrad
- Implements latest CSIPHY changes in dts - dtbs_checker + csiphy driver
  reviews
- Retains cphy_rx_src yaml requires it and is benign in the dtsi
  declaration - Wengmeng
- Depends-on: https://lore.kernel.org/r/20260917-x1e-csi2-phy-v18-0-6515b5255fa9@linaro.org
- Link to v6: https://patch.msgid.link/20260906-x1e-camss-csi2-phy-dtsi-v6-0-067f2ecc4630@linaro.org

Changes in v6:
- data-lanes start at 1 instead of 0 in the CAMSS node, aligned with PHY - Nihal
- Link to v5: https://patch.msgid.link/20260904-x1e-camss-csi2-phy-dtsi-v5-0-dc81d85b599d@linaro.org

Changes in v5:
- Adds Konrad's RB as indicated - Konrad
- Shifts DT from vdda-0p8-supply to vdda-0p9-supply as per schema -
  Krzysztof, Bryan
- Reworded commit log on the optional supply change to explain
  standalone CSIPHY nodes carrying their own supplies - Krzysztof
- Moves yaml changes from PHY series to here with the DT - bod

- Depends-on: https://lore.kernel.org/r/ 20260903-b4-linux-next-25-03-13-dtsi-x1e80100-camss-v14-0-01ef1eced075@linaro.org
- Link to v4: https://patch.msgid.link/20260708-x1e-camss-csi2-phy-dtsi-v4-0-572348ad1b2a@linaro.org

Changes in v4:
- Implements agreed port/endpoint bindings in CSIPHY series
- Depends-on: https://lore.kernel.org/r/20260708-x1e-csi2-phy-v9-0-0210b90c04cf@linaro.org
- Depends-on: https://lore.kernel.org/r/20260708-b4-linux-next-25-03-13-dtsi-x1e80100-camss-v12-0-f8588da41f16@linaro.org
- Link to v3: https://lore.kernel.org/r/20260326-x1e-camss-csi2-phy-dtsi-v3-0-1d5a9306116a@linaro.org

v3:
- Too many depends to have this merged in this cycle plus some review
  feedback on the depends patches but, for the sake of completeness with
  the other posted series - posting this now too.
- GDSC dropped - Konrad
- Clocks dropped and renamed as agreed - Konrad
- Using mode PHY_QCOM_CSI2_MODE_DPHY
- Changes ldo7 on Slim7x to value indicated by Alexanders
- Depends-on: https://lore.kernel.org/r/20260325-dphy-params-extension-v1-0-c6df5599284a@linaro.org
- Depends-on: https://lore.kernel.org/r/20260326-x1e-csi2-phy-v5-0-0c0fc7f5c01b@linaro.org
- Depends-on: https://lore.kernel.org/r/20260326-b4-linux-next-25-03-13-dtsi-x1e80100-camss-v11-0-5b93415be6dd@linaro.org
- Link to v2: https://lore.kernel.org/r/20260316-x1e-camss-csi2-phy-dtsi-v2-0-859f3fa55790@linaro.org

v2:
- Defines CSIPHY as sub-nodes of CAMSS
- Includes updated OPP tables for those PHYs
- Fixes supply names for RGB sensor on slim7x

- Depends-on: https://lore.kernel.org/r/20260315-x1e-csi2-phy-v4-0-90c09203888d@linaro.org
- Depends-on: https://lore.kernel.org/r/20260316-b4-linux-next-25-03-13-dtsi-x1e80100-camss-v10-0-fdfe984fe941@linaro.org
- Link to v1: https://lore.kernel.org/r/20260226-x1e-camss-csi2-phy-dtsi-v1-0-f3f7ddfbf849@linaro.org

v1:
Add the dtsi for 
- CAMSS
- CAMCC
- CSIPHY
- CCI

Add dts for RGB sensors on
- x1 crd
- Lenovo t14s
- Lenovo Slim7x
- Dell Inspiron 14p

To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konradybcio@kernel.org>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

---
Bryan O'Donoghue (12):
      dt-bindings: media: qcom,x1e80100-camss: Describe iommu entries
      dt-bindings: media: qcom,x1e80100-camss: Make vdd-csiphy supplies optional
      arm64: dts: qcom: x1e80100: Add CCI definitions
      arm64: dts: qcom: x1e80100: Add CAMSS block definition
      arm64: dts: qcom: x1e80100-crd: Add pm8010 CRD pmic,id=m regulators
      arm64: dts: qcom: x1e80100-crd: Add ov08x40 RGB sensor on CSIPHY4
      arm64: dts: qcom: x1e80100-t14s: Add pm8010 camera PMIC with voltage levels for IR and RGB camera
      arm64: dts: qcom: x1e80100-t14s: Add on ov02c10 RGB sensor on CSIPHY4
      arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add pm8010 camera PMIC with voltage levels for IR and RGB camera
      arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add l7b_2p8 voltage regulator for RGB camera
      arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add ov02c10 RGB sensor on CSIPHY4
      arm64: dts: qcom: x1e80100-dell-inspiron14-7441: Switch on CAMSS RGB sensor

 .../bindings/media/qcom,x1e80100-camss.yaml        |  28 +-
 arch/arm64/boot/dts/qcom/hamoa.dtsi                | 520 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/x1-crd.dtsi               | 112 +++++
 arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi        |  67 +++
 .../dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi    | 142 ++++++
 .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts  | 141 ++++++
 6 files changed, 1001 insertions(+), 9 deletions(-)
---
base-commit: 37dc35244bd8c6be6d79a6ac591d14c660822dd1
change-id: 20260226-x1e-camss-csi2-phy-dtsi-52c85c0d4da8

Best regards,
--  
Bryan O'Donoghue <bryan.odonoghue@linaro.org>

[PATCH v7 01/12] dt-bindings: media: qcom,x1e80100-camss: Describe iommu entries

[Bryan O'Donoghue]

The original iommus list included entries for ICP and BPS/IPE S1
contexts. Only the five S1 HLOS stream IDs are required by the CAMSS
ISP hardware: IFE/IFE_LITE read and write, SFE read and write, and
CDM IFE. The remaining entries serve other hardware blocks which will
be described in their own nodes as support is added.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Tested-by: Daniel J Blueman <daniel@quora.org> # Lenovo Slim 7x X1E80100
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../bindings/media/qcom,x1e80100-camss.yaml        | 26 ++++++++++++++++------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
index 2d1662ef522b7..126400772d028 100644
--- a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
@@ -104,7 +104,22 @@ properties:
       - const: sf_icp_mnoc
 
   iommus:
-    maxItems: 8
+    oneOf:
+      - items:
+          - description: S1 HLOS IFE and IFE_LITE non-protected read
+          - description: S1 HLOS IFE and IFE_LITE non-protected write
+          - description: S1 HLOS SFE non-protected read
+          - description: S1 HLOS SFE non-protected write
+          - description: S1 HLOS CDM IFE non-protected
+          - description: Legacy slot 0 - do not use
+          - description: Legacy slot 1 - do not use
+          - description: Legacy slot 2 - do not use
+      - items:
+          - description: S1 HLOS IFE and IFE_LITE non-protected read
+          - description: S1 HLOS IFE and IFE_LITE non-protected write
+          - description: S1 HLOS SFE non-protected read
+          - description: S1 HLOS SFE non-protected write
+          - description: S1 HLOS CDM IFE non-protected
 
   power-domains:
     items:
@@ -332,13 +347,10 @@ examples:
                                  "sf_icp_mnoc";
 
             iommus = <&apps_smmu 0x800 0x60>,
+                     <&apps_smmu 0x820 0x60>,
+                     <&apps_smmu 0x840 0x60>,
                      <&apps_smmu 0x860 0x60>,
-                     <&apps_smmu 0x1800 0x60>,
-                     <&apps_smmu 0x1860 0x60>,
-                     <&apps_smmu 0x18e0 0x00>,
-                     <&apps_smmu 0x1980 0x20>,
-                     <&apps_smmu 0x1900 0x00>,
-                     <&apps_smmu 0x19a0 0x20>;
+                     <&apps_smmu 0x18a0 0x0>;
 
             power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
                             <&camcc CAM_CC_IFE_1_GDSC>,

-- 
2.55.0

[PATCH v7 02/12] dt-bindings: media: qcom,x1e80100-camss: Make vdd-csiphy supplies optional

[Bryan O'Donoghue]

The vdd-csiphy supplies power the CSIPHY blocks. CSIPHYs may be
described as standalone phy nodes carrying their own supplies, in which
case the CAMSS node has none. Make the supplies optional; existing DTS
remain valid.

Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml | 2 --
 1 file changed, 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
index 126400772d028..57a838fe2d229 100644
--- a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
@@ -186,8 +186,6 @@ required:
   - iommus
   - power-domains
   - power-domain-names
-  - vdd-csiphy-0p8-supply
-  - vdd-csiphy-1p2-supply
   - ports
 
 additionalProperties: false

-- 
2.55.0

[PATCH v7 03/12] arm64: dts: qcom: x1e80100: Add CCI definitions

[Bryan O'Donoghue]

Add in two CCI buses.

One bus has two CCI bus master pinouts:
cci_i2c_sda0 = gpio101
cci_i2c_scl0 = gpio102

cci_i2c_sda1 = gpio103
cci_i2c_scl1 = gpio104

The second bus has two CCI bus master pinouts:
cci_i2c_sda2 = gpio105
cci_i2c_scl2 = gpio106

aon_cci_i2c_sda3 = gpio235
aon_cci_i2c_scl3 = gpio236

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/hamoa.dtsi | 150 ++++++++++++++++++++++++++++++++++++
 1 file changed, 150 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
index 8a96ea1bdb9c4..8ac3392b2d747 100644
--- a/arch/arm64/boot/dts/qcom/hamoa.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
@@ -5510,6 +5510,84 @@ videocc: clock-controller@aaf0000 {
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac15000 {
+			compatible = "qcom,x1e80100-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac15000 0 0x1000>;
+
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci0_default>;
+			pinctrl-1 = <&cci0_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac16000 {
+			compatible = "qcom,x1e80100-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac16000 0 0x1000>;
+
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci1_default>;
+			pinctrl-1 = <&cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ade0000 {
 			compatible = "qcom,x1e80100-camcc";
 			reg = <0x0 0x0ade0000 0x0 0x20000>;
@@ -6107,6 +6185,78 @@ tlmm: pinctrl@f100000 {
 			gpio-ranges = <&tlmm 0 0 239>;
 			wakeup-parent = <&pdc>;
 
+			cci0_default: cci0-default-state {
+				cci0_i2c0_default: cci0-i2c0-default-pins {
+					/* cci_i2c_sda0, cci_i2c_scl0 */
+					pins = "gpio101", "gpio102";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci0_i2c1_default: cci0-i2c1-default-pins {
+					/* cci_i2c_sda1, cci_i2c_scl1 */
+					pins = "gpio103", "gpio104";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
+					/* cci_i2c_sda0, cci_i2c_scl0 */
+					pins = "gpio101", "gpio102";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
+					/* cci_i2c_sda1, cci_i2c_scl1 */
+					pins = "gpio103", "gpio104";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_default: cci1-default-state {
+				cci1_i2c0_default: cci1-i2c0-default-pins {
+					/* cci_i2c_sda2, cci_i2c_scl2 */
+					pins = "gpio105", "gpio106";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci1_i2c1_default: cci1-i2c1-default-pins {
+					/* aon_cci_i2c_sda3, aon_cci_i2c_scl3 */
+					pins = "gpio235", "gpio236";
+					function = "aon_cci";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
+					/* cci_i2c_sda2, cci_i2c_scl2 */
+					pins = "gpio105", "gpio106";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
+					/* aon_cci_i2c_sda3, aon_cci_i2c_scl3 */
+					pins = "gpio235", "gpio236";
+					function = "aon_cci";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
 			edp0_hpd_default: edp0-hpd-default-state {
 				pins = "gpio119";
 				function = "edp0_hot";

-- 
2.55.0

[PATCH v7 04/12] arm64: dts: qcom: x1e80100: Add CAMSS block definition

[Bryan O'Donoghue]

Add dtsi to describe the x1e80100 CAMSS block

4 x CSIPHY
3 x TPG
2 x CSID
2 x CSID Lite
2 x IFE
2 x IFE Lite

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/hamoa.dtsi | 370 ++++++++++++++++++++++++++++++++++++
 1 file changed, 370 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
index 8ac3392b2d747..73bbaa49adf7d 100644
--- a/arch/arm64/boot/dts/qcom/hamoa.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
@@ -668,6 +668,50 @@ smem_mem: smem@ffe00000 {
 		};
 	};
 
+	csiphy_mxc_opp_table: opp-table-mxc {
+		compatible = "operating-points-v2";
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			required-opps = <&rpmhpd_opp_low_svs_d1>,
+					<&rpmhpd_opp_low_svs_d1>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
+		};
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
+		};
+	};
+
+	csiphy_mxa_opp_table: opp-table-mxa {
+		compatible = "operating-points-v2";
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			required-opps = <&rpmhpd_opp_low_svs_d1>,
+					<&rpmhpd_opp_low_svs_d1>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs_d1>;
+		};
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs_d1>;
+		};
+	};
+
 	qup_opp_table_100mhz: opp-table-qup100mhz {
 		compatible = "operating-points-v2";
 
@@ -5588,6 +5632,332 @@ cci1_i2c1: i2c-bus@1 {
 			};
 		};
 
+		camss: isp@acb7000 {
+			compatible = "qcom,x1e80100-camss";
+
+			reg = <0 0x0acb7000 0 0x2000>,
+			      <0 0x0acb9000 0 0x2000>,
+			      <0 0x0acbb000 0 0x2000>,
+			      <0 0x0acc6000 0 0x1000>,
+			      <0 0x0acca000 0 0x1000>,
+			      <0 0x0acb6000 0 0x1000>,
+			      <0 0x0ace4000 0 0x2000>,
+			      <0 0x0ace6000 0 0x2000>,
+			      <0 0x0ace8000 0 0x2000>,
+			      <0 0x0acec000 0 0x2000>,
+			      <0 0x0acf6000 0 0x1000>,
+			      <0 0x0acf7000 0 0x1000>,
+			      <0 0x0acf8000 0 0x1000>,
+			      <0 0x0ac62000 0 0xf000>,
+			      <0 0x0ac71000 0 0xf000>,
+			      <0 0x0acc7000 0 0x2000>,
+			      <0 0x0accb000 0 0x2000>;
+			reg-names = "csid0",
+				    "csid1",
+				    "csid2",
+				    "csid_lite0",
+				    "csid_lite1",
+				    "csid_wrapper",
+				    "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "csiphy4",
+				    "csitpg0",
+				    "csitpg1",
+				    "csitpg2",
+				    "vfe0",
+				    "vfe1",
+				    "vfe_lite0",
+				    "vfe_lite1";
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
+				 <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>,
+				 <&camcc CAM_CC_CORE_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_CPHY_RX_CLK_SRC>,
+				 <&camcc CAM_CC_CSID_CLK>,
+				 <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY4_CLK>,
+				 <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&gcc GCC_CAMERA_SF_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+			clock-names = "camnoc_nrt_axi",
+				      "camnoc_rt_axi",
+				      "core_ahb",
+				      "cpas_ahb",
+				      "cpas_fast_ahb",
+				      "cpas_vfe0",
+				      "cpas_vfe1",
+				      "cpas_vfe_lite",
+				      "cphy_rx_clk_src",
+				      "csid",
+				      "csid_csiphy_rx",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy4",
+				      "csiphy4_timer",
+				      "gcc_axi_hf",
+				      "gcc_axi_sf",
+				      "vfe0",
+				      "vfe0_fast_ahb",
+				      "vfe1",
+				      "vfe1_fast_ahb",
+				      "vfe_lite",
+				      "vfe_lite_ahb",
+				      "vfe_lite_cphy_rx",
+				      "vfe_lite_csid";
+
+			interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid_lite0",
+					  "csid_lite1",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csiphy4",
+					  "vfe0",
+					  "vfe1",
+					  "vfe_lite0",
+					  "vfe_lite1";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&mmss_noc MASTER_CAMNOC_ICP QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ahb",
+					     "hf_mnoc",
+					     "sf_mnoc",
+					     "sf_icp_mnoc";
+
+			iommus = <&apps_smmu 0x800 0x60>,
+				 <&apps_smmu 0x820 0x60>,
+				 <&apps_smmu 0x840 0x60>,
+				 <&apps_smmu 0x860 0x60>,
+				 <&apps_smmu 0x18a0 0x0>;
+
+			power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+					<&camcc CAM_CC_IFE_1_GDSC>,
+					<&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "ife0",
+					     "ife1",
+					     "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				camss_csiphy0_in_port: port@0 {
+					reg = <0>;
+				};
+
+				camss_csiphy1_in_port: port@1 {
+					reg = <1>;
+				};
+
+				camss_csiphy2_in_port: port@2 {
+					reg = <2>;
+				};
+
+				camss_csiphy4_in_port: port@3 {
+					reg = <3>;
+				};
+			};
+		};
+
+		csiphy0: phy@ace4000 {
+			compatible = "qcom,x1e80100-csi2-phy";
+			reg = <0 0x0ace4000 0 0x2000>;
+
+			clocks = <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CORE_AHB_CLK>;
+			clock-names = "core",
+				      "timer",
+				      "ahb";
+
+			operating-points-v2 = <&csiphy_mxc_opp_table>;
+
+			interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>,
+					<&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "top",
+					     "mmcx",
+					     "mx";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csiphy0_in_port: port@0 {
+					reg = <0>;
+				};
+
+				csiphy0_out_port: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		csiphy1: phy@ace6000 {
+			compatible = "qcom,x1e80100-csi2-phy";
+			reg = <0 0x0ace6000 0 0x2000>;
+
+			clocks = <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CORE_AHB_CLK>;
+			clock-names = "core",
+				      "timer",
+				      "ahb";
+
+			operating-points-v2 = <&csiphy_mxc_opp_table>;
+
+			interrupts = <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>,
+					<&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "top",
+					     "mmcx",
+					     "mx";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csiphy1_in_port: port@0 {
+					reg = <0>;
+				};
+
+				csiphy1_out_port: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		csiphy2: phy@ace8000 {
+			compatible = "qcom,x1e80100-csi2-phy";
+			reg = <0 0x0ace8000 0 0x2000>;
+
+			clocks = <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CORE_AHB_CLK>;
+			clock-names = "core",
+				      "timer",
+				      "ahb";
+
+			operating-points-v2 = <&csiphy_mxc_opp_table>;
+
+			interrupts = <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>,
+					<&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "top",
+					     "mmcx",
+					     "mx";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csiphy2_in_port: port@0 {
+					reg = <0>;
+				};
+
+				csiphy2_out_port: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		csiphy4: phy@acec000 {
+			compatible = "qcom,x1e80100-csi2-phy";
+			reg = <0 0x0acec000 0 0x2000>;
+
+			clocks = <&camcc CAM_CC_CSIPHY4_CLK>,
+				 <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CORE_AHB_CLK>;
+			clock-names = "core",
+				      "timer",
+				      "ahb";
+
+			operating-points-v2 = <&csiphy_mxa_opp_table>;
+
+			interrupts = <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>,
+					<&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "top",
+					     "mmcx",
+					     "mx";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csiphy4_in_port: port@0 {
+					reg = <0>;
+				};
+
+				csiphy4_out_port: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
 		camcc: clock-controller@ade0000 {
 			compatible = "qcom,x1e80100-camcc";
 			reg = <0x0 0x0ade0000 0x0 0x20000>;

-- 
2.55.0

[PATCH v7 05/12] arm64: dts: qcom: x1e80100-crd: Add pm8010 CRD pmic,id=m regulators

[Bryan O'Donoghue]

Add pmic,id = m rpmh to regulator definitions. This regulator set provides
vreg_l3m_1p8 the regulator for the ov08x40 RGB sensor on the CRD.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Daniel J Blueman <daniel@quora.org> # Lenovo Slim 7x X1E80100
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1-crd.dtsi | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
index 60db83b8985fe..47cfda908c515 100644
--- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
@@ -897,6 +897,36 @@ vreg_l3j_0p8: ldo3 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-8 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-l4-supply = <&vreg_s4c_1p8>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l3m_1p8: ldo3 {
+			regulator-name = "vreg_l3m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1808000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_1p8: ldo4 {
+			regulator-name = "vreg_l4m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1808000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
 };
 
 &gpu {

-- 
2.55.0

[PATCH v7 06/12] arm64: dts: qcom: x1e80100-crd: Add ov08x40 RGB sensor on CSIPHY4

[Bryan O'Donoghue]

Define ov08x40 on cci1_i2c1. The RGB sensor appears on the AON CCI pins
connected to CSIPHY4 in four lane mode.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1-crd.dtsi | 82 ++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
index 47cfda908c515..a98f5c5b623bc 100644
--- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
@@ -6,6 +6,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
+#include <dt-bindings/media/video-interface-devices.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
@@ -933,6 +935,70 @@ &gpu {
 	status = "okay";
 };
 
+&camss {
+	status = "okay";
+};
+
+&camss_csiphy4_in_port {
+	camss_csiphy4_inep: endpoint {
+		data-lanes = <1 2 3 4>;
+		remote-endpoint = <&csiphy4_out_ep>;
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	camera@36 {
+		compatible = "ovti,ov08x40";
+		reg = <0x36>;
+
+		reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&cam_rgb_default>;
+		pinctrl-names = "default";
+
+		clocks = <&camcc CAM_CC_MCLK4_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK4_CLK>;
+		assigned-clock-rates = <19200000>;
+
+		orientation = <MEDIA_ORIENTATION_FRONT>;
+
+		avdd-supply = <&vreg_l7b_2p8>;
+		dovdd-supply = <&vreg_l3m_1p8>;
+
+		port {
+			ov08x40_out_ep: endpoint {
+				data-lanes = <1 2 3 4>;
+				link-frequencies = /bits/ 64 <400000000>;
+				remote-endpoint = <&csiphy4_in_ep>;
+			};
+		};
+	};
+};
+
+&csiphy4 {
+	vdda-0p9-supply = <&vreg_l2c_0p8>;
+	vdda-1p2-supply = <&vreg_l1c_1p2>;
+
+	status = "okay";
+};
+
+&csiphy4_in_port {
+	csiphy4_in_ep: endpoint {
+		bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+		data-lanes = <1 2 3 4>;
+		remote-endpoint = <&ov08x40_out_ep>;
+	};
+};
+
+&csiphy4_out_port {
+	csiphy4_out_ep: endpoint {
+		remote-endpoint = <&camss_csiphy4_inep>;
+	};
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 
@@ -1563,6 +1629,22 @@ &tlmm {
 			       <44 4>, /* SPI (TPM) */
 			       <238 1>; /* UFS Reset */
 
+	cam_rgb_default: cam-rgb-default-state {
+		mclk-pins {
+			pins = "gpio100";
+			function = "cam_aon";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio237";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
 	ec_int_n_default: ec-int-n-state {
 		pins = "gpio66";
 		function = "gpio";

-- 
2.55.0

[PATCH v7 07/12] arm64: dts: qcom: x1e80100-t14s: Add pm8010 camera PMIC with voltage levels for IR and RGB camera

[Bryan O'Donoghue]

Add the PM8010 PMIC providing the following voltage rails:

vreg_l1m_r @ 1v2 IR sensor
vreg_l2m_r @ 1v2 RGB sensor
vreg_l3m_r @ 1v8 IR sensor
vreg_l4m_r @ 1v8 RGB sensor
vreg_l5m_r @ 2v8 IR sensor
vreg_l7m_r @ 2v8 RGB sensor

Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Daniel J Blueman <daniel@quora.org> # Lenovo Slim 7x X1E80100
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi    | 59 ++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
index 0bee2a3d6e7a9..d2eaabf917f11 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
@@ -562,6 +562,13 @@ vreg_l6b_1p8: ldo6 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l8b_3p0: ldo8 {
 			regulator-name = "vreg_l8b_3p0";
 			regulator-min-microvolt = <3072000>;
@@ -805,6 +812,58 @@ vreg_l3j_0p8: ldo3 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-8 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-l4-supply = <&vreg_s4c_1p8>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p2: ldo1 {
+			regulator-name = "vreg_l1m_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p2: ldo2 {
+			regulator-name = "vreg_l2m_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_1p8: ldo3 {
+			regulator-name = "vreg_l3m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_1p8: ldo4 {
+			regulator-name = "vreg_l4m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_2p8: ldo5 {
+			regulator-name = "vreg_l5m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p8: ldo7 {
+			regulator-name = "vreg_l7m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
 };
 
 &gpu {

-- 
2.55.0

[PATCH v7 08/12] arm64: dts: qcom: x1e80100-t14s: Add on ov02c10 RGB sensor on CSIPHY4

[Bryan O'Donoghue]

Switch on the ov02c10 RGB sensor on CSIPHY4.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi    | 83 ++++++++++++++++++++++
 1 file changed, 83 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
index d2eaabf917f11..f8b0f9fc0a6f0 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
@@ -9,6 +9,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
+#include <dt-bindings/media/video-interface-devices.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
@@ -866,6 +868,71 @@ vreg_l7m_2p8: ldo7 {
 
 };
 
+&camss {
+	status = "okay";
+};
+
+&camss_csiphy4_in_port {
+	camss_csiphy4_inep: endpoint {
+		data-lanes = <1 2>;
+		remote-endpoint = <&csiphy4_out_ep>;
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	camera@36 {
+		compatible = "ovti,ov02c10";
+		reg = <0x36>;
+
+		reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_rgb_default>;
+
+		clocks = <&camcc CAM_CC_MCLK4_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK4_CLK>;
+		assigned-clock-rates = <19200000>;
+
+		orientation = <MEDIA_ORIENTATION_FRONT>;
+
+		avdd-supply = <&vreg_l7m_2p8>;
+		dvdd-supply = <&vreg_l2m_1p2>;
+		dovdd-supply = <&vreg_l4m_1p8>;
+
+		port {
+			ov02c10_ep: endpoint {
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <400000000>;
+				remote-endpoint = <&csiphy4_in_ep>;
+			};
+		};
+	};
+};
+
+&csiphy4 {
+	vdda-0p9-supply = <&vreg_l2c_0p8>;
+	vdda-1p2-supply = <&vreg_l1c_1p2>;
+
+	status = "okay";
+};
+
+&csiphy4_in_port {
+	csiphy4_in_ep: endpoint {
+		bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+		data-lanes = <1 2>;
+		remote-endpoint = <&ov02c10_ep>;
+	};
+};
+
+&csiphy4_out_port {
+	csiphy4_out_ep: endpoint {
+		remote-endpoint = <&camss_csiphy4_inep>;
+	};
+};
+
 &gpu {
 	status = "okay";
 };
@@ -1447,6 +1514,22 @@ &tlmm {
 			       <72 2>, /* Secure EC I2C connection (?) */
 			       <238 1>; /* UFS Reset */
 
+	cam_rgb_default: cam-rgb-default-state {
+		mclk-pins {
+			pins = "gpio100";
+			function = "cam_aon";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio237";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
 	ec_int_n_default: ec-int-n-state {
 		pins = "gpio66";
 		function = "gpio";

-- 
2.55.0

[PATCH v7 09/12] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add pm8010 camera PMIC with voltage levels for IR and RGB camera

[Bryan O'Donoghue]

Add voltage regulators-8 for Camera on slim7x including:

- vreg_l1m_1p2
- vreg_l3m_1p8

Tested-by: Daniel J Blueman <daniel@quora.org> # Lenovo Slim 7x X1E80100
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts  | 51 ++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index 9eb2dfd99f20d..f4064e09d6231 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -795,6 +795,57 @@ vreg_l3j_0p8: ldo3 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-8 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-l4-supply = <&vreg_s4c_1p8>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p2: ldo1 {
+			regulator-name = "vreg_l1m_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p2: ldo2 {
+			regulator-name = "vreg_l2m_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_1p8: ldo3 {
+			regulator-name = "vreg_l3m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_1p8: ldo4 {
+			regulator-name = "vreg_l4m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_2p8: ldo5 {
+			regulator-name = "vreg_l5m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p8: ldo7 {
+			regulator-name = "vreg_l7m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
 };
 
 &gpu {

-- 
2.55.0

[PATCH v7 10/12] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add l7b_2p8 voltage regulator for RGB camera

[Bryan O'Donoghue]

Some sleuthing work by Aleksandrs Vinarskis in the bowels of the ACPI
tables for this part shows we need l7b_2p8 for the avdd supply.

Suggested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: Daniel J Blueman <daniel@quora.org> # Lenovo Slim 7x X1E80100
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index f4064e09d6231..79e1c47bec855 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -552,6 +552,13 @@ vreg_l2b_3p0: ldo2 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l8b_3p0: ldo8 {
 			regulator-name = "vreg_l8b_3p0";
 			regulator-min-microvolt = <3072000>;

-- 
2.55.0

[PATCH v7 11/12] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add ov02c10 RGB sensor on CSIPHY4

[Bryan O'Donoghue]

Add in the RGB sensor on CSIPHY4.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts  | 83 ++++++++++++++++++++++
 1 file changed, 83 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index 79e1c47bec855..1a63965a20684 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -7,6 +7,8 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/media/video-interfaces.h>
+#include <dt-bindings/media/video-interface-devices.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "hamoa.dtsi"
@@ -863,6 +865,71 @@ &gpu_zap_shader {
 	firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn";
 };
 
+&camss {
+	status = "okay";
+};
+
+&camss_csiphy4_in_port {
+	camss_csiphy4_inep: endpoint {
+		data-lanes = <1 2>;
+		remote-endpoint = <&csiphy4_out_ep>;
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	camera@36 {
+		compatible = "ovti,ov02c10";
+		reg = <0x36>;
+
+		reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_rgb_default>;
+
+		clocks = <&camcc CAM_CC_MCLK4_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK4_CLK>;
+		assigned-clock-rates = <19200000>;
+
+		orientation = <MEDIA_ORIENTATION_FRONT>;
+
+		avdd-supply = <&vreg_l7b_2p8>;
+		dvdd-supply = <&vreg_l1m_1p2>;
+		dovdd-supply = <&vreg_l3m_1p8>;
+
+		port {
+			ov02c10_ep: endpoint {
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <400000000>;
+				remote-endpoint = <&csiphy4_in_ep>;
+			};
+		};
+	};
+};
+
+&csiphy4 {
+	vdda-0p9-supply = <&vreg_l2c_0p8>;
+	vdda-1p2-supply = <&vreg_l1c_1p2>;
+
+	status = "okay";
+};
+
+&csiphy4_in_port {
+	csiphy4_in_ep: endpoint {
+		bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+		data-lanes = <1 2>;
+		remote-endpoint = <&ov02c10_ep>;
+	};
+};
+
+&csiphy4_out_port {
+	csiphy4_out_ep: endpoint {
+		remote-endpoint = <&camss_csiphy4_inep>;
+	};
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 
@@ -1410,6 +1477,22 @@ &tlmm {
 			       <44 4>, /* SPI (TPM) */
 			       <238 1>; /* UFS Reset */
 
+	cam_rgb_default: cam-rgb-default-state {
+		mclk-pins {
+			pins = "gpio100";
+			function = "cam_aon";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio237";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
 	edp_reg_en: edp-reg-en-state {
 		pins = "gpio70";
 		function = "gpio";

-- 
2.55.0

[PATCH v7 12/12] arm64: dts: qcom: x1e80100-dell-inspiron14-7441: Switch on CAMSS RGB sensor

[Bryan O'Donoghue]

Inspiron14 has a ov02e10 sensor on CSIPHY4. Enable the list of dependencies
now.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi | 67 +++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
index 4cda708455d84..5a3bf4eb4ef68 100644
--- a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
@@ -10,6 +10,8 @@
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/video-interfaces.h>
+#include <dt-bindings/media/video-interface-devices.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "hamoa-pmics.dtsi"
@@ -794,6 +796,71 @@ vreg_l3j_0p8: ldo3 {
 	};
 };
 
+&camss {
+	status = "okay";
+};
+
+&camss_csiphy4_in_port {
+	camss_csiphy4_inep: endpoint {
+		data-lanes = <1 2>;
+		remote-endpoint = <&csiphy4_out_ep>;
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	camera@10 {
+		compatible = "ovti,ov02e10";
+		reg = <0x10>;
+
+		reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_rgb_default>;
+
+		clocks = <&camcc CAM_CC_MCLK4_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK4_CLK>;
+		assigned-clock-rates = <19200000>;
+
+		orientation = <MEDIA_ORIENTATION_FRONT>;
+
+		avdd-supply = <&vreg_l7b_2p8>;
+		dvdd-supply = <&vreg_l7b_2p8>;
+		dovdd-supply = <&vreg_cam_1p8>;
+
+		port {
+			ov02e10_ep: endpoint {
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <360000000>;
+				remote-endpoint = <&csiphy4_in_ep>;
+			};
+		};
+	};
+};
+
+&csiphy4 {
+	vdda-0p9-supply = <&vreg_l2c_0p8>;
+	vdda-1p2-supply = <&vreg_l1c_1p2>;
+
+	status = "okay";
+};
+
+&csiphy4_in_port {
+	csiphy4_in_ep: endpoint {
+		bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+		data-lanes = <1 2>;
+		remote-endpoint = <&ov02e10_ep>;
+	};
+};
+
+&csiphy4_out_port {
+	csiphy4_out_ep: endpoint {
+		remote-endpoint = <&camss_csiphy4_inep>;
+	};
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 

-- 
2.55.0

Re: [PATCH v7 03/12] arm64: dts: qcom: x1e80100: Add CCI definitions

[Liviu Nicoara]

On Thu, 17 Sep 2026 14:20:28 +0100, Bryan O'Donoghue wrote:
> aon_cci_i2c_sda3 = gpio235
> aon_cci_i2c_scl3 = gpio236

Tested on a Dell XPS 13 9345, with the board DT for it [1] putting its
OV02C10 at 0x36 on cci1_i2c1, on these pins: the sensor probes, its
chip ID read over CCI, and it streams.

[1] https://lore.kernel.org/all/20260925181024.20352-1-lnicoara@thinkoid.org/

Tested-by: Liviu Nicoara <lnicoara@thinkoid.org> # Dell XPS 13 9345

Re: [PATCH v7 04/12] arm64: dts: qcom: x1e80100: Add CAMSS block definition

[Liviu Nicoara]

On Thu, 17 Sep 2026 14:20:29 +0100, Bryan O'Donoghue wrote:
> Add dtsi to describe the x1e80100 CAMSS block

Tested on a Dell XPS 13 9345, with the board DT for it [1] on CSIPHY4,
two lanes, and the PHY API series v20 and CSI2 PHY driver v18, on
7.2.6: the OV02C10 streams at 30 fps through libcamera's software ISP
and into a browser.

[1] https://lore.kernel.org/all/20260925181024.20352-1-lnicoara@thinkoid.org/

Tested-by: Liviu Nicoara <lnicoara@thinkoid.org> # Dell XPS 13 9345