mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: Linus Walleij <linusw@kernel.org>,
	 Bartosz Golaszewski <brgl@kernel.org>,
	Frank Li <Frank.Li@nxp.com>,
	 Sascha Hauer <s.hauer@pengutronix.de>,
	 Pengutronix Kernel Team <kernel@pengutronix.de>,
	 Fabio Estevam <festevam@gmail.com>,
	Shenwei Wang <shenwei.wang@nxp.com>,
	 Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: linux-gpio@vger.kernel.org, imx@lists.linux.dev,
	 linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,  Peng Fan <peng.fan@nxp.com>
Subject: [PATCH v2 3/9] gpio: mxc: replace of_device_is_compatible() with hwdata flags
Date: Mon, 05 Oct 2026 22:21:24 +0800	[thread overview]
Message-ID: <20261005-gpio-mxc-cleanup-v2-3-bdc3afbb35e2@nxp.com> (raw)
In-Reply-To: <20261005-gpio-mxc-cleanup-v2-0-bdc3afbb35e2@nxp.com>

From: Peng Fan <peng.fan@nxp.com>

Replace the runtime of_device_is_compatible() check for "fsl,imx7d-gpio"
with a flags field in mxc_gpio_hwdata to move the power-off capability
from a per-instance bool populated at probe time to static per-compatible
data.

Introduce MXC_GPIO_HAS_POWER_OFF and a dedicated imx7d_gpio_hwdata
instance that carries it, along with a mxc_gpio_has_power_off() helper
that replaces every former port->power_off test.

While at it, factor the register offsets shared by imx35 and imx7d into
a MXC_GPIO_HW_DATA_COMMON macro to avoid duplicating twelve identical
initializers.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/gpio/gpio-mxc.c | 50 ++++++++++++++++++++++++++++++-------------------
 1 file changed, 31 insertions(+), 19 deletions(-)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 0013f73d23bf..5fbbfcebaa8f 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -33,6 +33,8 @@
 #define IMX_SCU_WAKEUP_RISE_EDGE	6
 #define IMX_SCU_WAKEUP_HIGH_LVL		7
 
+#define MXC_GPIO_HAS_POWER_OFF		BIT(0)
+
 /* device type dependent stuff */
 struct mxc_gpio_hwdata {
 	unsigned dr_reg;
@@ -47,6 +49,7 @@ struct mxc_gpio_hwdata {
 	unsigned high_level;
 	unsigned rise_edge;
 	unsigned fall_edge;
+	unsigned int flags;
 };
 
 struct mxc_gpio_reg_saved {
@@ -70,13 +73,26 @@ struct mxc_gpio_port {
 	struct device *dev;
 	u32 both_edges;
 	struct mxc_gpio_reg_saved gpio_saved_reg;
-	bool power_off;
 	bool is_pad_wakeup;
 	unsigned long wakeup_pads;
 	u32 pad_type[32];
 	const struct mxc_gpio_hwdata *hwdata;
 };
 
+#define MXC_GPIO_HW_DATA_COMMON	\
+	.dr_reg		= 0x00,	\
+	.gdir_reg	= 0x04,	\
+	.psr_reg	= 0x08,	\
+	.icr1_reg	= 0x0c,	\
+	.icr2_reg	= 0x10,	\
+	.imr_reg	= 0x14,	\
+	.isr_reg	= 0x18,	\
+	.edge_sel_reg	= 0x1c,	\
+	.low_level	= 0x00,	\
+	.high_level	= 0x01,	\
+	.rise_edge	= 0x02,	\
+	.fall_edge	= 0x03
+
 static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
 	.dr_reg		= 0x1c,
 	.gdir_reg	= 0x00,
@@ -108,20 +124,19 @@ static struct mxc_gpio_hwdata imx31_gpio_hwdata = {
 };
 
 static struct mxc_gpio_hwdata imx35_gpio_hwdata = {
-	.dr_reg		= 0x00,
-	.gdir_reg	= 0x04,
-	.psr_reg	= 0x08,
-	.icr1_reg	= 0x0c,
-	.icr2_reg	= 0x10,
-	.imr_reg	= 0x14,
-	.isr_reg	= 0x18,
-	.edge_sel_reg	= 0x1c,
-	.low_level	= 0x00,
-	.high_level	= 0x01,
-	.rise_edge	= 0x02,
-	.fall_edge	= 0x03,
+	MXC_GPIO_HW_DATA_COMMON,
+};
+
+static struct mxc_gpio_hwdata imx7d_gpio_hwdata = {
+	MXC_GPIO_HW_DATA_COMMON,
+	.flags = MXC_GPIO_HAS_POWER_OFF,
 };
 
+static inline bool mxc_gpio_has_power_off(struct mxc_gpio_port *port)
+{
+	return port->hwdata->flags & MXC_GPIO_HAS_POWER_OFF;
+}
+
 #define GPIO_DR			(port->hwdata->dr_reg)
 #define GPIO_GDIR		(port->hwdata->gdir_reg)
 #define GPIO_PSR		(port->hwdata->psr_reg)
@@ -142,7 +157,7 @@ static const struct of_device_id mxc_gpio_dt_ids[] = {
 	{ .compatible = "fsl,imx21-gpio", .data = &imx1_imx21_gpio_hwdata },
 	{ .compatible = "fsl,imx31-gpio", .data = &imx31_gpio_hwdata },
 	{ .compatible = "fsl,imx35-gpio", .data = &imx35_gpio_hwdata },
-	{ .compatible = "fsl,imx7d-gpio", .data = &imx35_gpio_hwdata },
+	{ .compatible = "fsl,imx7d-gpio", .data = &imx7d_gpio_hwdata },
 	{ .compatible = "fsl,imx8dxl-gpio", .data = &imx35_gpio_hwdata },
 	{ .compatible = "fsl,imx8qm-gpio", .data = &imx35_gpio_hwdata },
 	{ .compatible = "fsl,imx8qxp-gpio", .data = &imx35_gpio_hwdata },
@@ -448,9 +463,6 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 	if (IS_ERR(port->clk))
 		return PTR_ERR(port->clk);
 
-	if (of_device_is_compatible(np, "fsl,imx7d-gpio"))
-		port->power_off = true;
-
 	pm_runtime_get_noresume(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
@@ -537,7 +549,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 
 static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
 {
-	if (!port->power_off)
+	if (!mxc_gpio_has_power_off(port))
 		return;
 
 	port->gpio_saved_reg.icr1 = readl(port->base + GPIO_ICR1);
@@ -550,7 +562,7 @@ static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
 
 static void mxc_gpio_restore_regs(struct mxc_gpio_port *port)
 {
-	if (!port->power_off)
+	if (!mxc_gpio_has_power_off(port))
 		return;
 
 	writel(port->gpio_saved_reg.icr1, port->base + GPIO_ICR1);

-- 
2.51.0


  parent reply	other threads:[~2026-10-05 14:24 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-05 14:21 [PATCH v2 0/9] gpio: mxc: bug fixes and probe cleanup Peng Fan (OSS)
2026-10-05 14:21 ` [PATCH v2 1/9] gpio: mxc: fix race between chained IRQ handler install and probe completion Peng Fan (OSS)
2026-10-05 14:21 ` [PATCH v2 2/9] gpio: mxc: fix wakeup_pads bit operations Peng Fan (OSS)
2026-10-06  8:36   ` Andy Shevchenko
2026-10-06 12:52     ` Peng Fan
2026-10-05 14:21 ` Peng Fan (OSS) [this message]
2026-10-05 14:21 ` [PATCH v2 4/9] gpio: mxc: convert pad wakeup compatible checks to hwdata flags Peng Fan (OSS)
2026-10-05 14:21 ` [PATCH v2 5/9] gpio: mxc: convert probe error handling to devres Peng Fan (OSS)
2026-10-05 14:21 ` [PATCH v2 6/9] gpio: mxc: switch probe error paths to dev_err_probe() Peng Fan (OSS)
2026-10-05 14:21 ` [PATCH v2 7/9] gpio: mxc: use local dev variable Peng Fan (OSS)
2026-10-05 14:21 ` [PATCH v2 8/9] gpio: mxc: introduce MXC_ICR macros and use field_prep/field_get Peng Fan (OSS)
2026-10-05 14:21 ` [PATCH v2 9/9] gpio: mxc: use BIT() macro for single-bit operations Peng Fan (OSS)
2026-10-06 10:16   ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261005-gpio-mxc-cleanup-v2-3-bdc3afbb35e2@nxp.com \
    --to=peng.fan@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=brgl@kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shenwei.wang@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®