From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: Linus Walleij <linusw@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Shenwei Wang <shenwei.wang@nxp.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: linux-gpio@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH v2 4/9] gpio: mxc: convert pad wakeup compatible checks to hwdata flags
Date: Mon, 05 Oct 2026 22:21:25 +0800 [thread overview]
Message-ID: <20261005-gpio-mxc-cleanup-v2-4-bdc3afbb35e2@nxp.com> (raw)
In-Reply-To: <20261005-gpio-mxc-cleanup-v2-0-bdc3afbb35e2@nxp.com>
From: Peng Fan <peng.fan@nxp.com>
mxc_gpio_generic_config() and mxc_gpio_set_pad_wakeup() call
of_device_is_compatible() on every invocation to determine pad wakeup
capability and i.MX8QM-specific behavior. These properties are
invariant for the lifetime of the device.
Extend the hwdata flags scheme introduced in the previous commit with
MXC_GPIO_HAS_PAD_WAKEUP and MXC_GPIO_IS_IMX8QM, adding dedicated
hwdata instances for imx8qm and imx8qxp (also used by imx8dxl).
This replaces the repeated device tree string comparisons in the
suspend/resume path with simple flag tests on static per-compatible
data.
While at it, clean up mxc_gpio_generic_config() to use a local ret
variable for clarity instead of the == 0 comparison.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
drivers/gpio/gpio-mxc.c | 46 ++++++++++++++++++++++++++++++++++------------
1 file changed, 34 insertions(+), 12 deletions(-)
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 5fbbfcebaa8f..1bd9f5beae4a 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -34,6 +34,8 @@
#define IMX_SCU_WAKEUP_HIGH_LVL 7
#define MXC_GPIO_HAS_POWER_OFF BIT(0)
+#define MXC_GPIO_HAS_PAD_WAKEUP BIT(1)
+#define MXC_GPIO_IS_IMX8QM BIT(2)
/* device type dependent stuff */
struct mxc_gpio_hwdata {
@@ -132,6 +134,26 @@ static struct mxc_gpio_hwdata imx7d_gpio_hwdata = {
.flags = MXC_GPIO_HAS_POWER_OFF,
};
+static struct mxc_gpio_hwdata imx8qm_gpio_hwdata = {
+ MXC_GPIO_HW_DATA_COMMON,
+ .flags = MXC_GPIO_IS_IMX8QM | MXC_GPIO_HAS_PAD_WAKEUP,
+};
+
+static struct mxc_gpio_hwdata imx8qxp_gpio_hwdata = {
+ MXC_GPIO_HW_DATA_COMMON,
+ .flags = MXC_GPIO_HAS_PAD_WAKEUP,
+};
+
+static inline bool mxc_gpio_is_imx8qm(struct mxc_gpio_port *port)
+{
+ return port->hwdata->flags & MXC_GPIO_IS_IMX8QM;
+}
+
+static inline bool mxc_gpio_has_pad_wakeup(struct mxc_gpio_port *port)
+{
+ return port->hwdata->flags & MXC_GPIO_HAS_PAD_WAKEUP;
+}
+
static inline bool mxc_gpio_has_power_off(struct mxc_gpio_port *port)
{
return port->hwdata->flags & MXC_GPIO_HAS_POWER_OFF;
@@ -158,9 +180,9 @@ static const struct of_device_id mxc_gpio_dt_ids[] = {
{ .compatible = "fsl,imx31-gpio", .data = &imx31_gpio_hwdata },
{ .compatible = "fsl,imx35-gpio", .data = &imx35_gpio_hwdata },
{ .compatible = "fsl,imx7d-gpio", .data = &imx7d_gpio_hwdata },
- { .compatible = "fsl,imx8dxl-gpio", .data = &imx35_gpio_hwdata },
- { .compatible = "fsl,imx8qm-gpio", .data = &imx35_gpio_hwdata },
- { .compatible = "fsl,imx8qxp-gpio", .data = &imx35_gpio_hwdata },
+ { .compatible = "fsl,imx8dxl-gpio", .data = &imx8qxp_gpio_hwdata },
+ { .compatible = "fsl,imx8qm-gpio", .data = &imx8qm_gpio_hwdata },
+ { .compatible = "fsl,imx8qxp-gpio", .data = &imx8qxp_gpio_hwdata },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxc_gpio_dt_ids);
@@ -576,15 +598,16 @@ static void mxc_gpio_restore_regs(struct mxc_gpio_port *port)
static bool mxc_gpio_generic_config(struct mxc_gpio_port *port,
unsigned int offset, unsigned long conf)
{
- struct device_node *np = port->dev->of_node;
+ int ret;
+
+ if (!mxc_gpio_has_pad_wakeup(port))
+ return false;
- if (of_device_is_compatible(np, "fsl,imx8dxl-gpio") ||
- of_device_is_compatible(np, "fsl,imx8qxp-gpio") ||
- of_device_is_compatible(np, "fsl,imx8qm-gpio"))
- return (gpiochip_generic_config(&port->gen_gc.gc,
- offset, conf) == 0);
+ ret = gpiochip_generic_config(&port->gen_gc.gc, offset, conf);
+ if (ret)
+ return false;
- return false;
+ return true;
}
static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable)
@@ -592,7 +615,6 @@ static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable)
unsigned long config;
bool ret = false;
int i, type;
- bool is_imx8qm = of_device_is_compatible(port->dev->of_node, "fsl,imx8qm-gpio");
static const u32 pad_type_map[] = {
IMX_SCU_WAKEUP_OFF, /* 0 */
@@ -613,7 +635,7 @@ static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable)
else
config = IMX_SCU_WAKEUP_OFF;
- if (is_imx8qm && config == IMX_SCU_WAKEUP_FALL_EDGE) {
+ if (mxc_gpio_is_imx8qm(port) && config == IMX_SCU_WAKEUP_FALL_EDGE) {
dev_warn_once(port->dev,
"No falling-edge support for wakeup on i.MX8QM\n");
config = IMX_SCU_WAKEUP_OFF;
--
2.51.0
next prev parent reply other threads:[~2026-10-05 14:24 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-05 14:21 [PATCH v2 0/9] gpio: mxc: bug fixes and probe cleanup Peng Fan (OSS)
2026-10-05 14:21 ` [PATCH v2 1/9] gpio: mxc: fix race between chained IRQ handler install and probe completion Peng Fan (OSS)
2026-10-05 14:21 ` [PATCH v2 2/9] gpio: mxc: fix wakeup_pads bit operations Peng Fan (OSS)
2026-10-06 8:36 ` Andy Shevchenko
2026-10-06 12:52 ` Peng Fan
2026-10-05 14:21 ` [PATCH v2 3/9] gpio: mxc: replace of_device_is_compatible() with hwdata flags Peng Fan (OSS)
2026-10-05 14:21 ` Peng Fan (OSS) [this message]
2026-10-05 14:21 ` [PATCH v2 5/9] gpio: mxc: convert probe error handling to devres Peng Fan (OSS)
2026-10-05 14:21 ` [PATCH v2 6/9] gpio: mxc: switch probe error paths to dev_err_probe() Peng Fan (OSS)
2026-10-05 14:21 ` [PATCH v2 7/9] gpio: mxc: use local dev variable Peng Fan (OSS)
2026-10-05 14:21 ` [PATCH v2 8/9] gpio: mxc: introduce MXC_ICR macros and use field_prep/field_get Peng Fan (OSS)
2026-10-05 14:21 ` [PATCH v2 9/9] gpio: mxc: use BIT() macro for single-bit operations Peng Fan (OSS)
2026-10-06 10:16 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261005-gpio-mxc-cleanup-v2-4-bdc3afbb35e2@nxp.com \
--to=peng.fan@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=andy.shevchenko@gmail.com \
--cc=brgl@kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=shenwei.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®