From: <ryan.wanner@microchip.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>,
<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<claudiu.beznea@tuxon.dev>, <bmasney@redhat.com>,
<alexander.sverdlin@gmail.com>,
<varshini.rajendran@microchip.com>
Cc: <cristian.birsan@microchip.com>,
<balamanikandan.gunasundar@microchip.com>,
<linux-clk@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v5 18/31] clk: at91: clk-i2s-mux: add support for parent_data
Date: Fri, 16 Jan 2026 13:07:11 -0700 [thread overview]
Message-ID: <0d5517f708a262924c6aa6f97a23d078891c218a.1768512290.git.ryan.wanner@microchip.com> (raw)
In-Reply-To: <cover.1768512290.git.ryan.wanner@microchip.com>
From: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add support for parent_data in i2s mux clock driver.
With this parent-child relation is described with pointers rather
than strings making registration a bit faster.
All the SoC based drivers that rely on clk-i2s-mux were adapted
to the new API change. The switch itself for SoCs will be done
in subsequent patches.
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
---
drivers/clk/at91/clk-i2s-mux.c | 6 +++++-
drivers/clk/at91/dt-compat.c | 2 +-
drivers/clk/at91/pmc.h | 1 +
drivers/clk/at91/sama5d2.c | 4 ++--
4 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/at91/clk-i2s-mux.c b/drivers/clk/at91/clk-i2s-mux.c
index fe6ce172b8b0..04d9fcf940fb 100644
--- a/drivers/clk/at91/clk-i2s-mux.c
+++ b/drivers/clk/at91/clk-i2s-mux.c
@@ -51,6 +51,7 @@ static const struct clk_ops clk_i2s_mux_ops = {
struct clk_hw * __init
at91_clk_i2s_mux_register(struct regmap *regmap, const char *name,
const char * const *parent_names,
+ struct clk_parent_data *parent_data,
unsigned int num_parents, u8 bus_id)
{
struct clk_init_data init = {};
@@ -63,7 +64,10 @@ at91_clk_i2s_mux_register(struct regmap *regmap, const char *name,
init.name = name;
init.ops = &clk_i2s_mux_ops;
- init.parent_names = parent_names;
+ if (parent_data)
+ init.parent_data = (const struct clk_parent_data *)parent_data;
+ else
+ init.parent_names = parent_names;
init.num_parents = num_parents;
i2s_ck->hw.init = &init;
diff --git a/drivers/clk/at91/dt-compat.c b/drivers/clk/at91/dt-compat.c
index ccdeba3a1130..2b1aa834f111 100644
--- a/drivers/clk/at91/dt-compat.c
+++ b/drivers/clk/at91/dt-compat.c
@@ -239,7 +239,7 @@ static void __init of_sama5d2_clk_i2s_mux_setup(struct device_node *np)
continue;
hw = at91_clk_i2s_mux_register(regmap_sfr, i2s_mux_np->name,
- parent_names, 2, bus_id);
+ parent_names, NULL, 2, bus_id);
if (IS_ERR(hw))
continue;
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index 32bb041c1466..3680e2d489d8 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -185,6 +185,7 @@ at91_clk_register_h32mx(struct regmap *regmap, const char *name,
struct clk_hw * __init
at91_clk_i2s_mux_register(struct regmap *regmap, const char *name,
const char * const *parent_names,
+ struct clk_parent_data *parent_data,
unsigned int num_parents, u8 bus_id);
struct clk_hw * __init
diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
index 8c7ff0108b41..f5d6c7a96cf2 100644
--- a/drivers/clk/at91/sama5d2.c
+++ b/drivers/clk/at91/sama5d2.c
@@ -372,7 +372,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
parent_names[0] = "i2s0_clk";
parent_names[1] = "i2s0_gclk";
hw = at91_clk_i2s_mux_register(regmap_sfr, "i2s0_muxclk",
- parent_names, 2, 0);
+ parent_names, NULL, 2, 0);
if (IS_ERR(hw))
goto err_free;
@@ -381,7 +381,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
parent_names[0] = "i2s1_clk";
parent_names[1] = "i2s1_gclk";
hw = at91_clk_i2s_mux_register(regmap_sfr, "i2s1_muxclk",
- parent_names, 2, 1);
+ parent_names, NULL, 2, 1);
if (IS_ERR(hw))
goto err_free;
--
2.43.0
next prev parent reply other threads:[~2026-01-16 20:07 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-16 20:06 [PATCH v5 00/31] clk: at91: add support for parent_data and ryan.wanner
2026-01-16 20:06 ` [PATCH v5 01/31] clk: at91: pmc: add macros for clk_parent_data ryan.wanner
2026-01-31 14:25 ` Claudiu Beznea
2026-01-16 20:06 ` [PATCH v5 02/31] clk: at91: pmc: Move macro to header file ryan.wanner
2026-01-31 14:26 ` Claudiu Beznea
2026-01-16 20:06 ` [PATCH v5 03/31] clk: at91: sam9x75: switch to parent_hw and parent_data ryan.wanner
2026-01-26 8:51 ` Claudiu Beznea
2026-01-16 20:06 ` [PATCH v5 04/31] clk: at91: clk-sam9x60-pll: use clk_parent_data ryan.wanner
2026-01-26 8:53 ` Claudiu Beznea
2026-01-16 20:06 ` [PATCH v5 05/31] clk: at91: clk-peripheral: switch to clk_parent_data ryan.wanner
2026-01-26 8:52 ` Claudiu Beznea
2026-01-16 20:06 ` [PATCH v5 06/31] clk: at91: clk-main: switch to clk parent data ryan.wanner
2026-01-26 8:52 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 07/31] clk: at91: clk-utmi: use clk_parent_data ryan.wanner
2026-01-26 8:52 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 08/31] clk: at91: clk-master: " ryan.wanner
2026-01-31 14:29 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 09/31] clk: at91: clk-programmable: " ryan.wanner
2026-01-26 8:53 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 10/31] clk: at91: clk-generated: " ryan.wanner
2026-01-30 6:56 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 11/31] clk: at91: clk-usb: add support for clk_parent_data ryan.wanner
2026-01-30 7:06 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 12/31] clk: at91: clk-system: use clk_parent_data ryan.wanner
2026-01-30 7:08 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 13/31] clk: at91: sama7d65: switch system clocks to parent_hw and parent_data ryan.wanner
2026-01-30 7:14 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 14/31] clk: at91: clk-pll: add support for parent_hw ryan.wanner
2026-01-30 7:18 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 15/31] clk: at91: clk-audio-pll: " ryan.wanner
2026-01-30 7:21 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 16/31] clk: at91: clk-plldiv: add support for parent_data ryan.wanner
2026-01-31 10:51 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 17/31] clk: at91: clk-h32mx: " ryan.wanner
2026-01-31 10:53 ` claudiu beznea
2026-01-16 20:07 ` ryan.wanner [this message]
2026-01-31 10:54 ` [PATCH v5 18/31] clk: at91: clk-i2s-mux: " claudiu beznea
2026-01-16 20:07 ` [PATCH v5 19/31] clk: at91: clk-smd: add support for clk_parent_data ryan.wanner
2026-01-31 10:57 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 20/31] clk: at91: clk-slow: add support for parent_data ryan.wanner
2026-01-31 11:00 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 21/31] clk: at91: dt-compat: switch to parent_hw and parent_data ryan.wanner
2026-01-31 11:02 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 22/31] clk: at91: sam9x60: " ryan.wanner
2026-01-31 11:05 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 23/31] clk: at91: sama5d2: " ryan.wanner
2026-01-31 11:11 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 24/31] clk: at91: sama5d3: switch to parent_data and parent_hw ryan.wanner
2026-01-31 11:14 ` claudiu beznea
2026-01-16 20:07 ` [PATCH v5 25/31] clk: at91: sama5d4: " ryan.wanner
2026-01-17 18:30 ` kernel test robot
2026-01-16 20:07 ` [PATCH v5 26/31] clk: at91: at91sam9x5: " ryan.wanner
2026-01-31 14:04 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 27/31] clk: at91: at91rm9200: switch to parent_hw and parent_data ryan.wanner
2026-01-31 14:13 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 28/31] clk: at91: at91sam9260: " ryan.wanner
2026-01-31 14:16 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 29/31] clk: at91: at91sam9g45: switch to parent_data and parent_hw ryan.wanner
2026-01-31 14:19 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 30/31] clk: at91: at91sam9n12: switch to parent_hw and parent_data ryan.wanner
2026-01-31 14:22 ` Claudiu Beznea
2026-01-16 20:07 ` [PATCH v5 31/31] clk: at91: at91sam9rl: switch to clk_parent_data ryan.wanner
2026-01-31 14:24 ` Claudiu Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0d5517f708a262924c6aa6f97a23d078891c218a.1768512290.git.ryan.wanner@microchip.com \
--to=ryan.wanner@microchip.com \
--cc=alexander.sverdlin@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=balamanikandan.gunasundar@microchip.com \
--cc=bmasney@redhat.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=cristian.birsan@microchip.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=sboyd@kernel.org \
--cc=varshini.rajendran@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®